Computer engraving machine, purchase and maintenance guide

Do not think to buy engraving machine can dry all live, and factory engraving machine is divided into a variety of models, in order to deal with a variety of processing tasks. For example, if you buy a mold-class engraving machine carving color plates, or buy a large carving machine to carve the seal, causing huge waste, but also will not get good results. The same, you buy advertising class engraving machine to do the mold, it may simply not competent. So you must be accountable to the purchase, the sales staff full description of the content of their own work to be done, including the size of the workpiece, the material of the material, material thickness, weight, and ultimately carved effects and requirements.

Second, select the appropriate model

Small advertising signs store the initial purchase, the production of three-dimensional word light board, use of the word crystal, color plates, badges, etc., should buy advertising level. In general, the engraving machine format is greater than 1200mm above is not suitable for carving two-color plates and other fine live, and apply to saws words, to do some large brand flat. Format in general engraving machine 1200mm and can be used as color plates and the like deliberately, saw the word can be used for rough work. Required processing cylinder or other shaped workpiece, due to the need to install some jigs or rotary axis, it is necessary to show Z-axis column is high, a large space between the table to the cutter head, so you can use special machine. If the chop shop specially engraved seal can be the first with the LE2520 or LE5032 engraving machine. Jade LE2520 engraving machine.

Third, understand the machine

All manufacturers of engraving machine of its internal structure are basically similar, but the machine quality is vastly different. This time you have a pair of "fire eye eye, look at the engraving machine materials is good or bad, the pros and cons of the accessories. But most customers do not understand, even if the site looked at the machine can not be seen, which requires you to the sales staff to learn more about the power of the engraving machine spindle, motor power, the drive is a home-made driver board quality drive.

Fourth, signed a contract

The decision to purchase the first thing to do is to sign a contract with the vendor, the contract should specify the purchase models, configurations, prices, delivery times and delivery methods, training methods, warranty, and payment and other factors. After the signing of the contract, usually according to the contract to pay a deposit (except stock).

Delivery and training

After the arrival of the engraving machine, usually by the technical staff make home visits for out-of-the-box testing machine after power, should be carefully examined whether the appearance of damage, impact damage in transit. If intact, and then control contract with random manual inventory of machine configuration with random attachments. Machine installation carried out by the technical staff (including hardware installation and removal of fixtures, the placement machine connected to power with a variety of cable, software installation, configuration, computer, install the optional engraving software). Installed, the factory to provide the test drawing machine carving test, such as the right to complete the carving test, measured delivery and acceptance is completed. Requirements of the customer's operating personnel with secondary education, and skilled computer operating basis, mainly in the training process should be familiar with different engraving speed and use a different tool choose a different quantity, in this area often requires the accumulation of experience, a good grasp of a lot of good to extend the life of the machine and tool.