Asterisk安装

一、获取asterisk安装包
wget asterisk-1.6.0.tar.gz
后面的版本号可以改变，可以安装的版本可以参考

二、解压安装
1. [root@~]# tar -zxvf asterisk-1.6.1.9.tar.gz                      // 解压asterisk安装包

2.[root@~]# cd asterisk-1.6.1.9                                        // 进入asterisk安装包

3.[root@asterisk asterisk-1.6.1.9]# ./configure                 // 环境检测和预配置

4.[root@asterisk asterisk-1.6.1.9]# make clean                //清理旧的编译中间文件

5.[root@asterisk asterisk-1.6.1.9]# make all                     // 从新编译所有文件

+--------- Asterisk Build Complete ---------+
+ Asterisk has successfully been built, and +
+ can be installed by running:              +
+                                           +
+                make install               +
+-------------------------------------------+

安装到这里软件会提示使用make install 来安装asterisk

[root@asterisk asterisk-1.6.1.9]# make install                    // 安装asterisk

+---- Asterisk Installation Complete -------+
+                                           +
+    YOU MUST READ THE SECURITY DOCUMENT    +
+                                           +
+ Asterisk has successfully been installed. +
+ If you would like to install the sample   +
+ configuration files (overwriting any      +
+ existing config files), run:              +
+                                           +
+                make samples               +
+                                           +
+----------------- or ---------------------+
+                                           +
+ You can go ahead and install the asterisk +
+ program documentation now or later run:   +
+                                           +
+               make progdocs               +
+                                           +
+ **Note** This requires that you have      +
+ doxygen installed on your local system    +
+-------------------------------------------+

[root@asterisk asterisk-1.6.1.9]# make samples                  // 安装配置模板

到这里askterisk安装完毕。

三、启动asterisk

1.输入asterisk，回车

2.输入asterisk -r

四、asterisk配置文件

asterisk.conf                       //asterisk的主配置文件 一般情况下不需要去改动

sip.conf                               //sip协议主要配置文件

extensions.conf                     //拨号规则配置文件

PS:关于asterisk的文件配置可以到网上搜一些，这里就不多说了。以后再单独写一篇。