U-Boot 1.3.1 (Feb 7 2008 - 16:41:05)
DRAM: 64 MB Flash: 1 MB NAND: NAND flash probing at 0x4E000000 64 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 [Tekkaman2440]#nfs 0x30008000 192.168.1.22:/home/tekkamanninja/working/nfs/rootfs.jffs2 dm9000 i/o: 0x20000300, id: 0x90000a46 MAC: 08:08:08:08:12:27 operating at 100M full duplex mode File transfer via NFS from server 192.168.1.22; our IP address is 192.168.1.2 Filename '/home/tekkamanninja/working/nfs/rootfs.jffs2'. Load address: 0x30008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################## done Bytes transferred = 5242880 (500000 hex) [Tekkaman2440]#nand erase 0xa00000 0x500000
NAND erase: device 0 offset 10485760, size 5242880 ... OK [Tekkaman2440]#nand write 0x30008000 0xa00000 0x500000
NAND write: device 0 offset 10485760, size 5242880 ... 5242880 bytes written: OK [Tekkaman2440]#setenv bootargs noinitrd root=/dev/mtdblock4 rootfstype=jffs2 rw console=ttySAC0,115200 init=/linuxrc mem=64M [Tekkaman2440]#boot dm9000 i/o: 0x20000300, id: 0x90000a46 MAC: 08:08:08:08:12:27 operating at 100M full duplex mode File transfer via NFS from server 192.168.1.22; our IP address is 192.168.1.2 Filename '/home/tekkamanninja/working/nfs/zImage.img'. Load address: 0x30008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 1600564 (186c34 hex) ## Booting image at 30008000 ... Image Name: tekkamanninja Created: 2008-02-15 2:16:28 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1600500 Bytes = 1.5 MB Load Address: 30008000 Entry Point: 30008040 Verifying Checksum ... OK XIP Kernel Image ... OK
Starting kernel ...
Uncompressing Linux........................................................................................................ done, booting the kernel. Linux version 2.6.24 (tekkamanninja@Tekkaman-Ninja) (gcc version 4.1.1) #1 Fri Feb 15 10:15:36 CST 2008 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 Machine: Tekkaman2440 Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: noinitrd root=/dev/mtdblock4 rootfstype=jffs2 rw console=ttySAC0,115200 init=/linuxrc mem=64M irq: clearing pending ext status 00000200 irq: clearing subpending status 00000003 irq: clearing subpending status 00000002 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=00500000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57 Console: colour dummy device 80x30 console [ttySAC0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61464KB available (2960K code, 306K data, 120K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2440: Initialising architecture S3C2440: IRQ Support S3C2440: Clock Support, DVS off S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (NAND) ©; 2001-2006 Red Hat, Inc. fuse init (API version 7.9) yaffs Feb 15 2008 10:10:34 Installing. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440 s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440 s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded dm9000 Ethernet Driver eth0: dm9000 at f6100300,f6100304 IRQ 51 MAC: 08:08:08:08:12:27 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2440-nand s3c2440-nand: Tacls=1, 9ns Twrph0=4 39ns, Twrph1=1 9ns NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 3579 at 0x037ec000 Creating 7 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00000000-0x00020000 : "U-Boot-1.3.1" 0x00020000-0x00030000 : "U-Boot-1.3.1 Parameter" 0x00030000-0x00500000 : "Linux2.6.24 Kernel" 0x00500000-0x00a00000 : "Root(cramfs)" 0x00a00000-0x00f00000 : "Root(JFFS2)" 0x00f00000-0x01400000 : "Root(YAFFS)" 0x01400000-0x04000000 : "DATA" usbmon: debugfs is not available s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected mice: PS/2 mouse device common for all mice S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 s3c2440-i2c s3c2440-i2c: slave address 0x10 s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled TCP cubic registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. s3c2410-rtc s3c2410-rtc: setting system clock to 2008-02-17 12:46:08 UTC (1203252368) VFS: Mounted root (jffs2 filesystem). Freeing init memory: 120K init started: BusyBox v1.9.1 (2008-02-16 15:04:08 CST) starting pid 779, tty '': '/etc/init.d/rcS' ----------mount all ----------Starting mdev...... ********************************************************* Tekkaman Ninja 2440 Rootfs(nfs) 2008.2 Love Linux ! ******************************************************** starting pid 783, tty '': '/bin/login' (none) login: root Password: login[783]: root login on 'console'
Processing /etc/profile... Set search library path in /etc/profile Set user path in /etc/profile Set PS1 in /etc/profile Done
[root@~]#
|