AO522-C5Ckk无线网卡brcm80211驱动安装

故障说明：

ubuntu10.10-11.04自带的三方驱动安装后，启用无线网卡，会导致系统完全死机，只能强制性的关机

fedora15下面没有自带驱动，只能单独安装

##############基于fedora15##############

本人的上网本型号：AO522-C5Ckk 10.1  

网卡：brcm80211

## 一、驱动、相关补丁、说明下载

##无线网卡  (brcm80211 module)  brcm80211:为具体驱动模块名称  BCM4313只是网卡的名字

#驱动下载

## 二、环境搭建

yum search kernel   #查看安装包名称（可能有细微差别，比如32和64位的区别）

yum install kernel-PAE-devel.i686

yum install kernel-headers.i686

#编译器的安装

yum search gcc

yum install gcc-c++.i686

## 三、编译安装驱动

tar xzvf hybrid-portsrc_x86_32-v5_100_82_38.tar.gz

patch -p0 < 5_100_82_38.patch

make clean

make

make install

depmod

modprobe wl  #不重启执则行此步骤

#ok看看你的无线网卡是否已经可以正常使用了^_^

## 四、详细的安装流程看README说明

## 五、本人无线网卡信息（及查看方法）

root@zyq-Aspire-One-522:/home/zyq# lspci

00:00.0 Host bridge: Advanced Micro Devices [AMD] Pavilion DM1Z-3000 Host bridge

00:01.0 VGA compatible controller: ATI Technologies Inc Device 9804

00:01.1 Audio device: ATI Technologies Inc Device 1314

00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]

00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)

00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)

00:15.0 PCI bridge: ATI Technologies Inc Device 43a0

00:15.2 PCI bridge: ATI Technologies Inc Device 43a2

00:15.3 PCI bridge: ATI Technologies Inc Device 43a3

00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1

00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2

00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4

00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6

00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5

00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7

06:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)

07:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)

# 07:00.0为Broadcom对应的地址

root@zyq-Aspire-One-522:/home/zyq# lspci  -vv -s 07:00.0

07:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)

Subsystem: Broadcom Corporation Device 0510

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 19

Region 0: Memory at 50100000 (64-bit, non-prefetchable) [size=16K]

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-

Capabilities: [58] Vendor Specific Information: Len=78

Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000  Data: 0000

Capabilities: [d0] Express (v1) Endpoint, MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us

ClockPM+ Surprise- LLActRep+ BwNot-

LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-

Capabilities: [13c v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff

Status: NegoPending- InProgress-

Capabilities: [160 v1] Device Serial Number 00-00-6e-ff-ff-23-4c-0f

Capabilities: [16c v1] Power Budgeting

Kernel driver in use: brcm80211

Kernel modules: wl, brcm80211

##############基于ubuntu 11.04##############

## 一、安装编译器

sudo su

apt-get install build-essential

## 二、编译安装驱动

rmmod wl  #lspci -vv -s 07:00.0 查看是否Kernel driver in use: wl这个驱动，有的话执行此条语句,或者通过附加驱动删除已经安装的无线网卡三方闭源驱动

patch -p0 < 5_100_82_38.patch

make clean

make

make install

#mv /lib/modules/`uname -r`/kernel/net/wireless/wl.ko /lib/modules/`uname -r`/kernel/net/wireless/wl.ko.orig  #备份？

#cp wl.ko /lib/modules/`uname -r`/kernel/net/wireless/wl.ko  #使用当前编译驱动

#ls /lib/modules/`uname -r`/kernel/net/wireless

## 三、注意：重启系统，则不需行以下四个步骤

depmod

modprobe lib80211

insmod wl.ko

modprobe wl  

## 四、关闭相关无用模块

#查看是否包含以下三个模块

lsmod  | grep "b43\|ssb\|wl"

#删除对应的模块

rmmod b43

rmmod ssb

rmmod wl

#加入黑名单，开机禁止使用以下模块

echo "blacklist ssb" >> /etc/modprobe.d/blacklist.conf

echo "blacklist b43" >> /etc/modprobe.d/blacklist.conf

阅读(3364) | 评论(0) | 转发(0) |

0

上一篇：查看分区uuid： blkid 命令

下一篇：修改Windows 2008R2远程链接数