TUXEDO TPERRNO 解读

#define TPMINVAL 0 /* minimum error message */
tperrno:1   : TPEABORT - transaction cannot commit
tperrno:2   : TPEBADDESC - bad communication descriptor
tperrno:3   : TPEBLOCK - blocking condition found
tperrno:4   : TPEINVAL - invalid arguments given
tperrno:5   : TPELIMIT - a system limit has been reached
tperrno:6   : TPENOENT - no entry found
tperrno:7   : TPEOS - operating system error
tperrno:8   : TPEPERM - bad permissions
tperrno:9   : TPEPROTO - protocol error
tperrno:10 : TPESVCERR - server error while handling request
tperrno:11 : TPESVCFAIL - application level service
tperrno:12 : TPESYSTEM - internal system error
tperrno:13 : TPETIME - timeout occured
tperrno:14 : TPETRAN - error starting transaction
tperrno:15 : TPGOTSIG - signal received and TPSIGRSTRT not specified
tperrno:16 : TPERMERR - resource manager error
tperrno:17 : TPEITYPE - type and/or subtype do not match service's
tperrno:18 : TPEOTYPE - type and/or subtype do not match buffer's or unknown
tperrno:19 : TPERELEASE - invalid release
tperrno:20 : TPEHAZARD - hazard exists that transaction heuristically completed
tperrno:21 : TPEHEURISTIC - transaction heuristically completed
tperrno:22 : TPEEVENT - event occurred
tperrno:23 : TPEMATCH - service name cannot be advertised due to matching conflict
tperrno:24 : TPEDIAGNOSTIC - function failed - check diagnostic value
tperrno:25 : TPEMIB - Management Information Base access error
#define TPMAXVAL 26 /* maximum error message */

The following list describes the general meaning of each error:
TPEABORT
A transaction could not commit because either the work performed by the
initiator or by one or more of its participants could not commit.
TPEBADDESC
A call descriptor is invalid or is not the descriptor with which a conversational
service was invoked.
TPEBLOCK
A blocking condition exists and TPNOBLOCK was specified.
TPEDIAGNOSTIC
The enqueuing of a message on the specified queue failed. The reason for
failure can be determined by the diagnostic returned via ctl.
TPEEVENT
An event occurred; the event type is returned in revent.
TPEGOTSIG
A signal was received and TPSIGRSTRT was not specified.
TPEHAZARD
Due to some failure, the work done on behalf of the transaction could have
been heuristically completed.
TPEHEURISTIC
Due to a heuristic decision, the work done on behalf of the transaction was
partially committed and partially aborted.
TPEINVAL
An invalid argument was detected.
TPEITYPE
The type and subtype of the input buffer is not one of the types and subtypes
that the service accepts.
TPELIMIT
The caller’s request was not sent because the maximum number of
outstanding requests or connections has been reached.
TPEMATCH
svcname is already advertised for the server but with a function other than
func.
TPEMIB
The administrative request failed. outbuf is updated and returned to the
caller with FML32 fields indicating the cause of the error, as described in
MIB(5) and TM_MIB(5).
TPENOENT
Cannot send to svc because it does not exist or is not the correct type of
service.
TPEOS
An operating system error has occurred.
TPEOTYPE
The type and subtype of the reply are not known to the caller.
TPEPERM
A client cannot join an application because it does not have permission to do
so or because it has not supplied the correct application password.
TPEPROTO
A library routine was called in an improper context.
TPERELEASE
When the TPACK is set and the target is a client from a prior release of the BEA
Tuxedo system that does not support the acknowledgment protocol.
TPERMERR
A resource manager failed to open or close correctly.
TPESVCERR
A service routine encountered an error either in tpreturn() or
tpforward() (for example, bad arguments were passed).
TPESVCFAIL
The service routine sending the caller’s reply called tpreturn() with
TPFAIL. This is an application-level failure.
TPESYSTEM
A BEA Tuxedo system error has occurred.
TPETIME
A timeout occurred.
TPETRAN
The caller cannot be placed in transaction mode.

The Jolt Class Library exceptions are listed for each class, constructor, and method listed in the BEA Jolt API Reference.

The following table lists the BEA Jolt and BEA Tuxedo exceptions that you may encounter while running BEA Jolt. Each exception includes a possible cause (or causes) and a recommended action (wherever possible) to help resolve the situation

1. TPEABORT	A transaction could not commit.
	Cause	This exception occurs because a transaction could not commit on the server side. This exception may also occur if the JSH performs a message resend for a commit that has timed out due to a previous blocking condition. In BEA Tuxedo, you can get this exception if tpcommit() is called with outstanding replies or open conversation connections.
	Action	Check transaction failures on the server side. BEA Jolt clients should resend the request after the transaction problem has been fixed on the server side.
2. TPEBADDESC	This exception should not occur in BEA Jolt.
	Cause	In BEA Tuxedo, this exception usually occurs when an invalid caller descriptor is given to tpgetrply() or tpsend().
	Action	None.
3. TPEBLOCK	A blocking condition has occurred and the TPNOBLOCK flag is specified in BEA Tuxedo.
	Cause	This exception occurs because the server is backed up.
	Action	You may need to re-examine and re-architect the application to handle extreme load cases.
4. TPEINVAL	Invalid arguments were given by the application.
	Cause	This exception occurs if a new JoltSession class is processed before performing the security protocol. In Jolt's URL handler routine, this exception occurs when a invalid challenge response is received by the openConnection() method. The TPEINVAL exception can also occur if you specified a hexadecimal address for the JSL -H option without a leading "0x" , or if you entered a wrong address in UBBCONFIG file. In addition, the GETREC(), DELREC() and GETSVC() services in JREPSVR can return TPEINVAL if the REPNAME is missing. Also, the ADDREC() service in JREPSVR can return TPEINVAL if the REPVAL is not specified.
	Action	This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.
5. TPELIMIT	The maximum number of outstanding requests or subscriptions has been reached.
	Cause	The maximum number of outstanding requests has been reached. This exception could also mean that the BEA Tuxedo System Event Broker's maximum number of subscriptions (50 internally defined for now) has been reached.
	Action	You may need to re-examine and re-architect the application to handle load extreme cases.
6. TPENOENT	The requested service is not available.
	Cause	Usually, the requested service is not booted or advertised on the BEA Tuxedo server side. It is also possible that the requested service is not defined in the Jolt Repository. This exception could also indicate that you could not access the BEA Tuxedo System Event Broker.
	Action	You need to check the server side to see if the service is booted or advertised. Otherwise, check to see if the requested service is defined in the Jolt Repository. After the service is available on the server side, Jolt clients should resend the request.
7. TPEOS	An operating system exception has occurred.
	Cause	The exact nature of the problem is described in the ULOG file. Typically, you can get this exception due to the memory allocation failures, wrong network address, or failure to attach to the Bulletin Board for the JSL.
	Action	Try fixing the problem as described in the ULOG file. Jolt clients might need to reconnect or resend the request after the problem has been fixed.
8. TPEPERM	There is a permission problem when attempting to join a session.
	Cause	In the JoltSession class, this exception occurs because the Jolt client does not have the permission to join the application. Permission may be denied based on an invalid application password, failure to pass application specific authentication, or the use of restricted client names. In the Jolt URL handler routing, this exception occurs when a bad challenge response is received on the openConnection() method. If the Jolt Repository is set to read-only, the ADDREC() and DELREC() services, or the GARBAGECOLLECT() service in JREPSVR, also return the TPEPERM exception.
	Action	This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.
9. TPEPROTO	A function was called in an improper context.
	Cause	For this exception, an improper context could include a rollback() or commit() method called by a participant, an unsubscribe event that is called while "unsubscribe all" is in progress, or when the caller is not a client.
	Action	This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.
10. TPESVCERR	A service routine has encountered an exception during tpreturn() or tpforward() in BEA Tuxedo.
	Cause	The service routine is returning application-level failures, which may include any of the following: an application calls tpreturn() or tpforward() with invalid flags, the caller descriptor is no longer valid, or there are invalid return values.
	Action	This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.
11. TPESVCFAIL	The service routine sending the caller's reply called tpreturn() with TPFAIL.
	Cause	The service routine is returning application-level failures.
	Action	This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.
12. TPESYSTEM	A BEA Tuxedo system exception has occurred.
	Cause	The exact nature of the exception is written to the ULOG file. For example, when performing the Diffie-Hellman encryption, this exception occurs if the JSH is unable to send negotiation parameters. The JSL fails to send the reply challenge call to the Jolt client. The Jolt client sends an incorrect timestamp value, an incorrect number of encrypted bits value, an incorrect ticket value, or timestamp mismatches in reconnect protocol. The JSL fails to initialize network protocol information, or could not establish a listening address on a network. The JSH receives a network message with an unknown context or receives a message with a different connection.
	Action	In most cases, you need to find out the exact nature of the exception from the ULOG file on the server side. In case of hardware or network failures, you can try to reconnect if a hardware or network failover is available.
13. TPETIME	A transaction timeout has occurred.
	Cause	There is a transaction timeout on the server side.
	Action	This type of exception should be addressed on the application server side. Jolt clients should resend the request after the server side problem has been resolved.
14. TPETRAN	The requested service belongs to a server that does not support transactions and TPNOTRAN is not set.
	Cause	A transaction is not supported for the requested service.
	Action	This type of exception should be addressed on the application server side. Jolt clients should resend the request after the server side problem has been resolved.
15. TPGOTSIG	An unexpected signal was received.
	Cause	A signal was received and the TPSIGSTRT flag was not specified.
	Action	None.
16. TPERMERR	A resource manager failed to open or close correctly on the server side.
	Cause	The resource manager might not be available; or all the resource might not be released or committed before close.
	Action	Check the ULOG file for reasons why the resource manager failed to open or close on the server side.
17. TPEITYPE	For the JoltRemoteService class, the requested BEA Tuxedo service does not recognize the type and subtype of the input data.
	Cause	The type and subtype of input data is not defined in the Jolt Repository.
	Action	The type and subtype of input data should be defined in the Jolt Repository. This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.
18. TPEOTYPE	For the JoltRemoteService class, the BEA Tuxedo caller does not recognize the type and the subtype of the reply data.
	Cause	The type and subtype of output data is not defined in the Jolt Repository.
	Action	The type and subtype of output data should be defined in the Jolt Repository. This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.
19. TPERELEASE	This exception should not occur in BEA Jolt.
	Cause	Usually, this exception occurs when an unsolicited notification message is sent from a server with the TPACK flag set, and the target is a Jolt client from an older release of BEA Jolt that does not support the acknowledgment protocol.
	Action	Verify that the correct version of BEA Jolt is installed on your machine. This type of exception should have been handled during the application development cycle. You should not receive this exception in an production environment.
20. TPEHAZARD	Due to some failure, the work done on behalf of the transaction may have been heuristically completed.
	Cause	Check the ULOG file on the server side for details.
	Action	None.
21. TPEHEURISTIC	Due to a heuristic decision, the work done on behalf of the transaction was partially committed and partially aborted.
	Cause	Check the ULOG file on the server side for details.
	Action	None.
22. TPEEVENT	This exception should not occur in BEA Jolt.
	Cause	Usually, this exception means that an event has occurred when sending or receiving a message in a conversational connection in BEA Tuxedo. However, conversational server connections are not available in BEA Jolt.
	Action	None.
23. TPEMATCH	The JoltUserEvent class has implemented a subscription to an asynchronous notification event, but the subscription has failed because it matches an existing subscription.
	Cause	The subscription failed because it matched one already listed with the BEA Tuxedo System Event Broker.
	Action	None.
24. TPEDIAGNOSTIC	This exception should not occur in BEA Jolt.
	Cause	Usually, this exception occurs when enqueuing or dequeuing a message from the specified queue fails in BEA Tuxedo. However, enqueing and dequeing of messages is not available in BEA Jolt.
	Action	None.
25. TPEMIB	This exception should not occur in BEA Jolt.
	Cause	Usually, this exception occurs when an administrative request via tpadmcall() has failed in BEA Tuxedo. However, TMIB calls are not available in BEA Jolt.
	Action	None.
26. TPEJOLT	This exception indicates there is a problem in BEA Jolt.
	Cause	The TPEJOLT exception could occur for any of the following reasons: JoltSession class—the send(), recv() or cancel() methods throw TPEJOLT if the session object or message ID is invalid. JoltSession class—throws TPEJOLT when TPINIT data conversion fails. bea.jolt.pool.connection class—throws TPEJOLT when a run-time exception occurs. JoltRemoteService—the call() method throws TPEJOLT when the buffer conversion between BEA Jolt and BEA Tuxedo fails, the requested service is not defined in the Jolt Repository, the requested service does not the right version, or the reply data conversion fails. JoltUserEvent class—throws TPEJOLT when event name conversion fails, an invalid message ID is encountered, or unsolicited message data conversion fails.
	Action	This type of exception should have been handled during the application development cycle. You should not receive this exception in a production environment.