NUC7003的启动信息

 

PID Check [0]: TYPE:W19L320SB ID:0xDA 0x2A Flash ID:0x01 0x7E
PID Check [1]: TYPE:W19L320SB ID:0x01 0x7E Flash ID:0x01 0x7E


NUC700 Boot Loader [ Version 1.1 $Revision: 1 $ ] Rebuilt on Nov 05 2010
Memory Size is 0x800000 Bytes, Flash Size is 0x400000 Bytes
Board designed by Nuvoton
Hardware support provided at Nuvoton
Copyright (c) 2009 Nuvoton Tech. Corp. All rights reserved.
Boot Loader Configuration:

        MAC Address : 00:11:22:33:44:57
        IP Address : 192.168.1.165
        DHCP Client : Enabled
        CACHE : Disabled
        BL buffer base : 0x00300000
        BL buffer size : 0x00100000
        Baud Rate : 115200
        USB Interface : Enabled
        Serial Number : 0x00000000


For help on the available commands type 'h'

Press ESC to enter debug mode ..
Cache
Processing image 1 ...
Processing image 2 ...
Executing image 2 ...
Linux version 2.4.20-uc0 (suhushuang@suhushuang-virtual-machine) (gcc version 3.0) #150 2011骞09鏈29鏃鏄熸湡鍥11:06:21 CST
Processor: Nuvoton NUC745 revision 1
Architecture: NUC700
On node 0 totalpages: 1792
zone(0): 0 pages.
zone(1): 1792 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0 rw
Calibrating delay loop... 39.83 BogoMIPS
Memory: 7MB = 7MB total
Memory: 5220KB available (1087K code, 690K data, 48K init)
Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Nuvoton NUC700 Serial driver version 1.0 (2005-08-15) with no serial options enabled
ttyS00 at 0xfff80000 (irq = 9) is a NUC700
Nuvoton NUC7001 Serial driver version 1.0 (2005-08-15) with no serial options enabled
ttyS00 at 0xfff80100 (irq = 10) is a NUC7001
Nuvoton NUC7002 Serial driver version 1.0 (2005-08-15) with no serial options enabled
ttyS00 at 0xfff80200 (irq = 11) is a NUC7002
Nuvoton NUC7003 Serial driver version 1.0 (2005-08-15) with no serial options enabled
ttyS00 at 0xfff80300 (irq = 12) is a NUC7003
I2C Bus Driver has been installed successfully.
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 700000-7953FF [VIRTUAL 700000-7953FF] (RO)
RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
mtd flash device: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 2 MTD partitions on "mtd flash device":
0x00000000-0x00300000 : "images 3M"
0x00300000-0x00400000 : "user 1M"
usb.c: registered new driver hub
add a static ohci host controller device
: USB OHCI at membase 0xfff05000, IRQ 15
hc_alloc_ohci
usb-ohci.c: AMD756 erratum 4 workaround
hc_reset
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Usb device driver by ns24 zswan designed
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
FAT: bogus logical sector size 38720
FAT: bogus logical sector size 38720
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 48K
console=/dev/ttyS0
init started: BusyBox v0.60.4 (2009.03.26-07:52+0000) multi-call binary
init started: BusyBox v0.60.4 (2009.03.26-07:52+0000) multi-call binary
Starting pid 10, console : '/etc/init.d/rcS'

Wait for auto-negotiation complete...OK
100MB - FULL
Starting pid 15, console : '/bin/sh'


BusyBox v0.60.4 (2009.03.26-09:58+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

# (long)CURRENT_STACK_FRAME=0x5bfdcc
thcfg.main_thread=0x800
STACK_SIZE
[TIMER]xxxxxxxxx 0
--------------------------------Lcd_Cls(263)
Not implement Lcd_SetFont(297)
Not implement Beep(145)
 INITIAL SYSTEM
Not implement Lcd_SetFont(297)
 Pls Waiting...
[COM]Recv thread start!pthread_create
manage pid:16
[COM]Recv thread
[COM]Dev path: /dev/ttyS1
[COM]Com1 setting:115200,8,n,2
[COM]Open COM1