分类： LINUX
2011-01-06 19:18:25
Hi,
I have made jpeg code in demos, and It seams that JPEG and MPEG4 encoder on our board works fine at the same time.
Following is my JPEG code , you can add them into encode demos.
/* jpeg.h*/
#include
#include
#include
#include
#include
#include
#include "encode.h"
#ifndef __JPEG_H__
#define __JPEG_H__
int jpegEncodeAlgCreate(Engine_Handle hEngine, IMGENC1_Handle *hEncodePtr,
int width, int height, int num, XDAS_Int32 *imageBufSize);
void jpegencode(IMGENC1_Handle enc, unsigned char *inBuf, unsigned int inBufSize,
unsigned char *encodedBuf, unsigned int * encodedBufSize);
typedef struct ImageEnv {
Rendezvous_Handle hRendezvousInit;
Rendezvous_Handle hRendezvousCleanup;
Pause_Handle hPause;
FifoUtil_Obj inFifo;
FifoUtil_Obj outFifo;
int imageWidth;
int imageHeight;
int chcnt;
} ImageEnv;
void * imageThrFxn(void *arg);
#endif /* __JPEG_H__ */
/*jpeg.c*/
/* Standard Linux headers */
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
/* Codec Engine headers */
#include
#include
#include
#include "encode.h"
#include "jpeg.h"
#include "capture.h"
#include "recorder.h"
static char *jpegenc_name[MAXCHNUM] = {"jpegenc", "jpegenc:1", "jpegenc:2", "jpegenc:3"};
int jpegEncodeAlgCreate(Engine_Handle hEngine, IMGENC1_Handle *hEncodePtr,
int width, int height, int num, XDAS_Int32 *imageBufSize)
{
IMGENC1_Params image_encParams;
IMGENC1_DynamicParams image_dynParams;
IMGENC1_Status image_imgStatus;
IMGENC1_Handle hEncode;
#define SCANS 4
#define QVALUE 73
image_encParams.size = sizeof(IMGENC1_Params);
image_encParams.maxWidth = width;
image_encParams.maxHeight = height;
image_encParams.maxScans = SCANS;
image_encParams.dataEndianness = XDM_DEFAULT;
image_encParams.forceChromaFormat = XDM_YUV_422ILE;
hEncode = IMGENC1_create(hEngine, jpegenc_name[num], &image_encParams);
if (NULL == hEncode)
{
fprintf(stderr, "error: can't open codec jpegenc\n");
seterrdev(ERR_IMGENCCREAT);
return FAILURE;
}
/* set the parameters for encoding */
image_dynParams.size = sizeof(IMGENC1_DynamicParams);
image_dynParams.numAU = XDM_DEFAULT;
image_dynParams.inputChromaFormat = XDM_YUV_422ILE;
image_dynParams.inputWidth = width;
image_dynParams.inputHeight = height;
image_dynParams.captureWidth = 0;
image_dynParams.generateHeader = XDM_ENCODE_AU;
image_dynParams.qValue = QVALUE;
image_imgStatus.size = sizeof(image_imgStatus);
if (IMGENC1_control(hEncode, XDM_SETPARAMS, &image_dynParams, &image_imgStatus) ==
XDM_EFAIL) {
fprintf(stderr, "error: could not set PARAMS: 0x%x\n", XDM_SETPARAMS);
seterrdev(ERR_IMGENCCREAT);
return FAILURE;
}
/* ask the codec for buffer sizes - these are typically conservative */
if (IMGENC1_control(hEncode, XDM_GETBUFINFO, &image_dynParams, &image_imgStatus) ==
XDM_EFAIL) {
fprintf(stderr, "error: could not get BUFINFO: 0x%x\n", XDM_GETBUFINFO);
seterrdev(ERR_IMGENCCREAT);
return FAILURE;
}
*imageBufSize = image_imgStatus.bufInfo.minOutBufSize[0];
*hEncodePtr = hEncode;
return SUCCESS;
}
void jpegencode(IMGENC1_Handle enc, unsigned char *inBuf, unsigned int inBufSize,
unsigned char *encodedBuf, unsigned int *encodedBufSize)
{
Int32 status;
IMGENC1_InArgs encInArgs;
IMGENC1_OutArgs encOutArgs;
XDM1_BufDesc inBufDesc;
XDM1_BufDesc encodedBufDesc;
//XDAS_Int32 numRead;
/* initialize buffer descriptors that hold input and output buffers */
inBufDesc.numBufs = 1;
inBufDesc.descs[0].bufSize = inBufSize;
inBufDesc.descs[0].buf = inBuf;
encodedBufDesc.numBufs = 1;
encodedBufDesc.descs[0].bufSize = *encodedBufSize;
encodedBufDesc.descs[0].buf = encodedBuf;
/* the size field of Args and Params structs must be initialized */
encInArgs.size = sizeof(encInArgs);
encOutArgs.size = sizeof(encOutArgs);
/* perform the image (JPEG) encoding */
status = IMGENC1_process(enc, &inBufDesc, &encodedBufDesc, &encInArgs,
&encOutArgs);
if (status == IMGENC1_EOK) {
*encodedBufSize = encOutArgs.bytesGenerated;
}
else {
printf( "Encoder frame processing FAILED, status = 0x%lx, "
"extendedError = 0x%lx\n", status,
encOutArgs.extendedError);
seterrdev(ERR_IMGENCPROC);
}
}
void * imageThrFxn(void *arg)
{
Engine_Handle hEngine_en = NULL;
ImageEnv *envp = (ImageEnv *) arg;
void *status = THREAD_SUCCESS;
int imgWidth = envp->imageWidth/(envp->chcnt>1?2:1);
int imgHeight = envp->imageHeight/(envp->chcnt>1?2:1);
int ch;
CaptureBufferElement ce;
/* Reset, load, and starot DSP Engine */
hEngine_en = Engine_open("image", NULL, NULL);
if (hEngine_en == NULL) {
ERR("Failed to open encode engine %s\n", "image");
seterrdev(ERR_ENGINEOPNE);
cleanup(THREAD_FAILURE);
}
DBG("Encode Engine opened in jpeg thread\n");
// here for mjpeg
IMGENC1_Handle image_enc = NULL;
XDAS_Int8 *image_encodedBuf[MAXCHNUM] = {NULL};
XDAS_Int32 image_encodedBufSize = 0;
XDAS_Int32 image_BufSize[MAXCHNUM];
if(FAILURE == jpegEncodeAlgCreate(hEngine_en, &image_enc, imgWidth, imgHeight, 0, &image_encodedBufSize))
{
cleanup(THREAD_FAILURE);
}
printf("image_encodedBufSize: %lu\n", image_encodedBufSize);
image_encodedBuf[0] = (XDAS_Int8 *)Memory_contigAlloc(image_encodedBufSize*(envp->chcnt>1?4:1), Memory_DEFAULTALIGNMENT);
if (image_encodedBuf[0] == NULL) {
fprintf(stderr, "image_encodedBuf[0] alloc failed!\n");
seterrdev(ERR_SYSTEM);
cleanup(THREAD_FAILURE);
}
for(ch=1; chchcnt)
image_encodedBuf[ch] = image_encodedBuf[0] + ch*image_encodedBufSize;
else
image_encodedBuf[ch] = NULL;
}
DBG("Image encoder created.\n");
/* Signal that initialization is done and wait for other threads */
Rendezvous_meet(envp->hRendezvousInit);
DBG("Entering jpeg main loop.\n");
while (!gblGetQuit()) {
/* Get a buffer from the capture thread */
if (FifoUtil_get(&envp->inFifo, &ce) == FIFOUTIL_FAILURE) {
ERR("Failed to put buffer in output fifo\n");
seterrdev(ERR_SYSTEM);
breakLoop(THREAD_FAILURE);
}
/* Is the capture thread flushing the pipe? */
if (ce.id == CAPTURE_FLUSH) {
ERR("Receive Flush and Break fifo\n");
breakLoop(THREAD_SUCCESS);
}
ms_time_t nTime = ce.nTime; //it's time get yuv data time;
/* Encode the captured video frame */
char *virtBuf = ce.virtBuf;
//int bufSize = ce.bufSize/(envp->chcnt>1?4:1);
int bufSize = imgWidth*imgHeight*SCREEN_BPP/8;
for(ch=0; chchcnt; ch++)
{
virtBuf = ce.virtBuf + bufSize*ch;
//here for jpegenc
image_BufSize[ch] = image_encodedBufSize;
jpegencode(image_enc, virtBuf, bufSize, image_encodedBuf[ch], (unsigned int *)&image_BufSize[ch]);
//printf(".............. jpeg size %lu\n", image_BufSize[ch]);
}
writeJpegData(image_encodedBuf, image_BufSize, nTime);
#if 0
/* Send the buffer back to the capture thread */
if (FifoUtil_put(&envp->outFifo, &ce) == FIFOUTIL_FAILURE) {
ERR("Failed to put buffer in output fifo\n");
breakLoop(THREAD_FAILURE);
}
#endif
}
DBG("Exitted jpeg main loop.\n");
cleanup:
/* Make sure the other threads aren't waiting for init to complete */
Rendezvous_force(envp->hRendezvousInit);
/* Make sure the other threads aren't stuck pausing */
Pause_off(envp->hPause);
#if 0
/* Make sure the capture thread isn't stuck in FifoUtil_get() */
FifoUtil_put(&envp->outFifo, &cFlush);
#endif
/* Meet up with other threads before cleaning up */
Rendezvous_meet(envp->hRendezvousCleanup);
if (image_enc) {
IMGENC1_delete(image_enc);
}
if (image_encodedBuf[0]) {
Memory_contigFree(image_encodedBuf[0], image_encodedBufSize*(envp->chcnt>1?4:1));
}
if (hEngine_en) {
Engine_close(hEngine_en);
}
return status;
}
----- Original Message -----
From: "Vladimir Pantelic" < >
To: <>
Cc: "davinci-linux-open-source" <>
Sent: Thursday, May 14, 2009 12:20 AM
Subject: Re: Can JPEG and MPEG4 run on DM355 simultaneity
> Steve Chen wrote:
>> On Wed, 2009-05-13 at 23:14 +0800, Jammy Dane wrote:
>>> Hi all,
>>>
>>> I want to run JPEG and MPEG4 encode on DM355 board, and I wrote a
>>> demo referencing the code in ../DVSDK_1_00_30_xx/demo/encode/* and the
>>> code in ../DVSDK_1_00_30_xx/examples/jpegenc/*. After I run the demo,
>>> it said on the terminal:
>>> /*********************************************************/
>>> :/opt/dvsdk# ./encode_test_jpeg -v 1.mpeg4 -r 640x576 -b 384000
>>> Encode demo started.
>>> gpio control udp socket create ok!
>>> the /dev/modem is opened
>>> allocate modem buffer
>>> fd = 17
>>> Capturing 720x576 video (cropped to 640x576)
>>> ERROR: can't open engine image
>>> CMEMK Error: GETPHYS: Failed to convert virtual 0x4001cbe0 to physical.
>>> CMEM Error: getPhys: Failed to get physical address of 0x4001cbe0
>>
>> Don't know much about applications, but 0x400xxxxx seems more like a
>> physical rather than virtual address to me. Just a thought...
>
> no, 0x4001cbe0 is a virtual address
>
> I doubt you can run JPEG and MPEG4 at the same time, I think they share the HW.
>
> but, in any case, run with CE_DEBGU=2
>
>
> _______________________________________________
> Davinci-linux-open-source mailing list
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: