在Cisco设备上查看机框和模块序列号

涉及思科设备的保修需要找设备的序列号，一般只要找到设备上面的“S/N”标签就没问题了，但是有的Cisco设备后面贴了好多纸条，不是很

清楚哪个是需要的序列号，而且有的设备例如模块不方便从slot里拔出,因此下面介绍如何通过IOS命令行的形式快速获得设备的序列号:

那么如何使用命令行在设备上查看机框和模块序列号，Cisco不同的设备查找序列号的命令也不尽相同，下面总结了比较典型的Cisco网络设备序列号查找命令：

GSR上面的命令：

机框序列号

gsr12008#show gsr chassis-info
Backplane NVRAM [version 0x20] Contents -
Chassis: type 12416 Fab Ver: 4
Chassis S/N: TBA0716XX24
PCA: 73-4214-4 rev: A0 dev: 4759 HW ver: 1.0
Backplane S/N: TBC07125001
MAC Addr: base 000B.FC5E.7C00 block size: 4096
RMA Number: 0x00-0x00-0x00 code: 0x00 hist: 0x00
No chassis redundancy information stored

板卡序列号:

gsr12008#show diags

SLOT 0 (RP/LC 0 ): 1 Port ES Packet Over SONET OC-192c/STM-64 Single Mode/SR SC connector
MAIN: type 94, 800-18668-04 rev A0
Deviation: D072604, D072345
HW config: 0x04 SW key: 00-00-00
PCA: 73-7335-05 rev E0 ver 5
Design Release 2.0 S/N SAD082XXBS5
MBUS: Embedded Agent
Test hist: 0x00 RMA#: 00-00-00 RMA hist: 0x00
DIAG: Test count: 0x00000000 Test results: 0x00000000
FRU: Linecard/Module: OC192E/POS-SR-SC=
Route Memory: MEM-LC4E-256=
Packet Memory: MEM-LC4E-PKT-512=


在7500系列上的机框序列号:

7513#show rsp chassis-info
Backplane NVRAM(ver 1) contents:
Chassis model: 0x02
Chassis S/N: 73026XX1
MAC base: 0002.4A21.B000
MAC block size: 2048
RMA failure: 0
RMA number: 0
Manufactured Date: 0 5 23

板卡序列号:

7513#show diagbus
Slot 5:
Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
VIP2 R5K controller, FRU: VIP2-50=, HW rev 2.03, board revision A0
Serial number: 18944XX0 Part number: 73-2167-06
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible

6509上面的查找序列号

show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAD06280XXD
2 2 Catalyst 6000 supervisor 2 (Standby) WS-X6K-SUP2-2GE SAD06280XX9

3550和2950上面show version可以看到!

7200系列查看引擎、机箱SN

show c7200
查看I/O 2FE：show diag
新版的1700、2600能在ver里看到sn，老的不行，pcb sn和system sn不一样。

常见的设备用如上方法都可以找到，大部分设备用sh ver都可以解决，在这里补充一下
7200上面sh ver和sh c7200显示的序列号是一致的，就是
process board ID：********

查找MDS9200,9500光纤存储交换机序列号：

查找机框SN:
MDS9216# show license host-id
License hostid: VDH=FOX073601XL

查找模块SN:
MDS9216# show hardware
--------------------------------
Chassis has 2 slots for Modules
--------------------------------

Module in slot 1 is ok
Module type is "1/2 Gbps FC/Supervisor"
No submodules are present
Model number is DS-X9216-K9-SUP
H/W version is 3.0
Part Number is 73-8297-07
Part Revision is A0
Manufacture Date is Year 7 Week 42
Serial number is JAB074204UF
CLEI code is CNS8RJSAAB

Module in slot 2 is other
Module type is "IP Storage Services Module"
1 submodules are present
RAM size is 0 (kb)
Model number is DS-X9304-SMIP
H/W version is 1.1
Part Number is 73-9507-02
Part Revision is A1
Manufacture Date is Year 9 Week 13
Serial number is JAB091303PX
CLEI code is CNUIACWAAB
---------------------------------------
Chassis has 2 Slots for Power Supplies
---------------------------------------

PS in slot A is in fail/shutdown
Power supply type is "800.10W 110v AC"
Model number is DS-CAC-845W
H/W version is 1.0
Part Number is 341-0052-01
Part Revision is A0
Manufacture Date is Year 7 Week 27
Serial number is QCS0727100K
CLEI code is

PS in slot B is ok
Power supply type is "800.10W 110v AC"
Model number is DS-CAC-845W
H/W version is 1.0
Part Number is 341-0052-01
Part Revision is A0
Manufacture Date is Year 7 Week 32
Serial number is QCS073210EA
CLEI code is

----------------------------------
Chassis has 1 slot for Fan Module
----------------------------------

Fan module is ok
Model number is DS-2SLOT-FAN
H/W version is 1.0
Part Number is 73-8339-05
Part Revision is A0
Manufacture Date is Year 7 Week 34
Serial number is NWG073402N6
CLEI code is

-----------------------------------------
Chassis has 1 slot for Interface Module
-----------------------------------------

Interface module is ok
Model number is DS-X9216-MGT
H/W version is 2.0
Part Number is 73-8301-05
Part Revision is A0
Manufacture Date is Year 7 Week 35
Serial number is JAB073507XG
CLEI code is CNP6160AAB

 

Command for CatOS Version 8.x for Cat4000 and Cat6000 Switches:

Switch (enable)show sprom {mod/port} | include Vendor SN

Command for CatOS Version other than 8.x for Cat4000 and Cat6000 Switches:

Switch (enable)show sprom {mod/port}

Command for IOS for Cat6500 Switch:

Switch#show idprom interface gigabitEthernet {mod/port} | include Vendor SN

Command for Cat4500 Switch:

Switch#show idprom interface gigabitEthernet {module/port} | include Serial No.

Command for CAT3750/3560/2970/2960/2918 Switches:

Switch#show controllers ethernet-controller gigabitEthernet {mod/port} phy | include Serial Number

EXAMPLE OF A CAT4500 SWITCH:

Switch#show idprom interface gigabitEthernet 3/29 | include Serial No.

Vendor Serial No. = ICF1020202U <---- Serial No. is in the impacted range.

 

 

转自：