分类: LINUX
2011-02-21 15:27:26
This page gathers thoughts and ideas around a hard-float ARM port for Debian.
A lot of modern ARM boards and devices ship with a floating-point unit (FPU), but the current Debian armel port doesn't take much advantage of it.
A new ARM port requiring the presence of a FPU would help squeeze the most performance juice out of hardware with a FPU.
Currently the Debian armhf port requires at least an ARMv7 CPU with Thumb2 and VFP3D16.
may be a useful reference. It also references similar more-complete lists elsewhere.
This section provides some background information on FPUs, ARM EABI, GCC floating-point ABIs, hwcaps...
With ARMv5 an optional floating point instruction set known as Vector Floating Point (VFP) was introduced. This is now effectively the norm for modern ARM implementations; although it is possible to configure Cortex-A8, Cortex-A9 and Cortex-A5 with no VFP almost all implementations do provide it. Prior to this there was no real standardized set of floating point instructions, with some vendors supplying their own coprocessors, most supplying none, and the original ARM FPU 'standard' implementation being almost entirely unused in the real world.
VFP was extended over time, with VFPv2 (some ARM9/ARM11) VFPv3-D16 (e.g. Marvell Dove) and VFPv3+NEON (Most Cortex-A8) present in current production silicon.
In spite of the name, the base VFP architecture is not well suited for vector operations. For practical purposes it is a normal scalar floating point unit. The NEON extension defines vector instructions similar to SSE or and shares a register file with the VFP unit.
NEON and VFP/VFP2/VFP3 remain an optional part of the architecture.
The ARM EABI specification covers calling conventions across libraries and binaries. It defines two incompatible ABIs: one uses (VFP) floating point registers for passing function arguments, and the other does not.
Unlike many other architectures, ARM supports use of FPU instructions while still conforming to the base ABI. This allows code to take advantage of the FPU without breaking compatibility with older libraries or applications. This does incur some overhead relative to a full hard-float system, and obviously requires a VFP capable CPU.
For historical reasons and to match the ARM RVCT kit, the GCC FPU and ABI selection options are not entirely orthogonal. The -mfloat-abi= option controls both the ABI, and whether floating point instructions may be used. The available options are:
soft: Full software floating point.
softfp: Use the FPU, but remain compatible with soft-float code.
hard: Full hardware floating point.
In addition, the -mfpu= option can be used to select a VFP/NEON (or FPA or Maverick) variant. This has no effect when -mfloat-abi=soft is specified.
The combination of -mfpu=vfp and -mfloat-abi=hard is not available in FSF GCC 4.4; see TODO section below for options.
See for an in depth discussion and some performance research.
The GCC -mfloat-abi=softfp flag allows use of VFP while remaining compatible with soft-float code. This allows selection of appropriate routines at runtime based on the availability of VFP hardware.
The runtime linker, ld.so, supports a mechanism for selecting runtime libraries based on features reported by the kernel. For instance, it's possible to provide two versions of libm, one in /lib and another one in /lib/vfp, and ld.so will select the /lib/vfp one on systems with VFP.
This mechanism is dubbed "hwcaps".
This only works when the binaries are compatible (use the same ABI); you can't select between hard-float and soft-float libs with hwcaps. See for more details.
is a great in-depth explanation of how ld.so and gcc and multilib paths interact if you want to understand this stuff.
A new port would be little-endian as that is almost invariably used in recent ARM designs.
Since the new port would require VFP, it would limit which are supported by the new port.
The toolchain needs to be configured with a specific base CPU and base VFP version in mind.
It might make sense for such a new port -- which would essentially target newer hardware -- to target newer CPUs. For instance, it could target ARMv6 or ARMv7 , and VFPv2, VFPv3-D16 or NEON.
If targeting ARMv7, another option is to build for Thumb-2 which provides both code-size and speed(generally) improvements.
The table below recaps which port names Debian/dpkg saw so far.
name |
endianess |
status |
arm |
little-endian |
Original Debian arm port using original ABI ('OABI'), last release in Debian lenny; being retired if favor of armel |
armel |
little-endian |
introduced in Debian lenny; EABI, actively maintained; targets armv4t; doesn't require an FPU |
armeb |
big-endian |
unofficial OABI port; inactive and dead |
The name of the new ARM port using the hard-float ABI is 'armhf' (for 'hard-float').
See Port naming debate notes below for info on why and how this name was chosen.
In practice armel will be used for older CPUs (armv4t, armv5, armv6), and armhf for newer CPUs (armv7+VFP).
Other ('flavoured') builds of the base ports for different CPU optimisations and hardware capabilities are possible. The question of which (if any) other flavours will be maintained is currently under discussion, and is likely to be decided at the [ | Debian ARM/Embedded Sprint] in Feb 2011. e.g armel flavours for v6 and v7 CPUs without VFP, or an armhf flavour for VFP+NEON.
GCC when built to target the GNU arm-linux-gnueabi triplet will support both the hard-float and soft-float calling conventions.
dpkg relies on the triplet to identify the port (gcc -dumpmachine output). Some other projects such as multiarch rely on having distinct triplets across all Debian architectures.
For the new Debian port, it is possible to use the vendor field in the triplet to have distinct triplets. For instance, the triplet could be arm-hardfloat-linux-gnueabi.
arm-none-linux-gnueabi, just like in compilers, would be an option but it is confusing to relate to arm-linux-gnueabi versus arm-none-linux-gnueabi; it is clearer to relate to arm-hardfloat-linux-gnueabi and also allows distinguishing between and the new port.
Genesi USA, Inc. did a proof-of-concept rebuild of Ubuntu karmic (9.10)'s armel port with the hard-floating. They noticed important wins (in the order of 40% performance improvement) in floating-point heavy applications/libraries such as mesa, with a Cortex-A8 CPU.
It's likely that the performance benefits are much larger on Cortex-A8 CPUs than on Cortex-A9 CPUs which have a faster VFP design and more conventional pipeline.
NEON is an extension of the VFP which allows for very efficient manipulation of matrices, and vector data in general. This is notably useful for processing audio and video data, or for fast memcpy().
Programs usually take advantage of NEON thanks to hand-crafted assembly routines. GCC can automatically vectorize code and generate NEON instructions, however this tends to have limited success. It would seem sensible NOT to require NEON in a new port since some modern ARMv7 such as Marvell Dove and NVidia Tegra2 don't implement it.
It is also possible to use NEON instructions for regular scalar floating point code, and this can give significant (2-3x) speedup on Cortex-A8 hardware. However GCC does not currently implement this, and it is not always applicable as NEON instructions are not fully IEEE compliant.
See for an in depth discussion and some performance research.
Genesi-USA would be happy to continue sharing the 9 EfikaMX (Freescale i.MX51) buildds used for their proof-of-concept to help get a new port started.
Genesi-USA is also giving hardware (10 EfikaMX T03) to main Debian sub-project leads for Education, Embedded, Live systems, Ubuntu developers, and Linaro developers.
Genesi-USA is also giving old hardware (EfikaMX T02) which could be used to help out buildds, setup porterboxes or give away to interested developers who would work on the new port. While stock it is limited, if you are interested, register yourself into PowerDeveloper site and, then, contact Hector Oron <>.
.. the new port could either have backported support in gcc-4.4, or use gcc-4.5 from the start
.. or use a different code base such as SourceryG++ (~4.4.1) or Linaro GCC (~4.4.1 -> 4.5)
Manufacturer |
SoC |
architecture |
VFP |
SIMD |
Notes |
Freescale |
iMX5x |
armv7 |
VFPv3 |
NEON |
Cortex-A8; NEON only reliable in Tape-Out 3 or above |
Nvidia |
Tegra2 |
armv7 |
VFPv3 D16 |
none |
|
Marvell |
Dove |
armv7 |
VFPv3 D16 |
iwMMXt |
|
Texas Instruments |
OMAP3xxx |
armv7 |
VFPv3 |
NEON |
Cortex-A8 |
Texas Instruments |
OMAP4xxx |
armv7 |
VFPv3 |
unclear |
Cortex-A9 |
Qualcomm |
Snapdragon |
armv7 |
VFPv3 |
NEON[1] |
Qualcomm "Scorpion" core |
|
S5PC100 |
armv7 |
VFPv3 |
NEON |
Cortex-A8 |
Larger list at
Port naming is a classic bikeshed issue. It is also important as decisions have long-term effects, and the issues are quite complex. The ARM architecture has move variation than most and thus presents particular naming challenges. So we had quite a long discussion about the port name (and the need for a port at all).
You can read the full naming debate threads here: "armelfp: new architecture name for an armel variant" "cortex / arm-hardfloat-linux-gnueabi (was Re: armelfp: new architecture name for an armel variant)"
(that'll keep you entertained for a couple of hours at least
Here is a very brief summary of some major points raised.
'cortex' was suggested by Genesi's Matt Sealey as it more-or-less defines the armv7+vpf3-d16+thumb2 set of options the port is targetting, but the idea of using a marketing name for the arch was not popular.
Other suggestions generally were about encoding more things in the port name: base arm architecture flavour, endianness, arm 'profile' (A/M/R as in cortex-A8, cortex-M3). So we had "armelfp" or "armelhp" and "armelvfp" and "arm7hf" and "armel7hf". THis was followed by suggestions to shorten names along the lines of: Losing the "e" for EABI and "l" for little endian doesn't seem like that big a loss, as by far the most usual operation of these processor cores is under a little-endian EABI environment, and OABI is not even considered supported anymore for these chips.
The eventual conclusion was that port names in Debian should encode incompatible ABIs, not compatible variations within an ABI (such as CPU optimisations, referred to as 'flavours'). The default flavour for a port can change over time as older CPUs become obsolete. (e.g. the i386 architecture has been built for 386, 486 and 586 flavours over time). Rebuilds of a port for a new flavour within the ABI are possible to gain performance improvements, but Debian itself normally provides builds to the lowest common denominator still in widespread use, maximising generality. Thus attempts to encode all the possible flavour options in the port name were unecessary, and produced long and awkward names. A better solution to the problem of recording the flavour to which a port or package is built is suitable package metadata.
and Linaro gcc are almost the same thing, Genesi recommend 2010q1 for now - it is gcc 4.4.1 but it is functionally equivalent to gcc 4.5 for the purpose of a port. There are qualms about not using mainline FSF GCC - I (matt sealey) understand Debian policy decides no custom patches unless they are going to be mainlined in the future. It can be argued that Codesourcery commits most of the ARM, PPC support for GCC and are the architects of hardfp support in gcc 4.5 (published and maintained in the SourceryG++ tree). It's still GPL.
The lowest worthwhile CPU implementation is ARMv7-A (therefore the recommended build option is -march=armv7-a)
FPU should be set at VFPv3-D16 as they represent the miminum specification of the processors to support here (therefore the recommended build option is -mfpu=vfpv3-d16)