原文见：
[分享]Vxvm3.5单机下对根盘的反封装和重新封装及镜像应大家的要求，顶饥挨饿花了40分钟在公司做了对根盘的反封装和重新封装及镜像，希望大家都来拍砖，转贴请注明出处，谢谢！
1.备份vxvm的license,或备份/etc/vx/licenses/lic/*.vxlic
[code]root@sun # vxlicrep
VERITAS License Manager vxlicrep utility version 3.00.007i
Copyright (C) VERITAS Software Corp 2002. All Rights reserved.
Creating a report on all VERITAS products installed on this system
-----------------***********************-----------------
License Key = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX
Product Name = VERITAS Volume Manager
License Type = DEMO
OEM ID = 4095
Demo End Date = 2007年02月01日 星期四 00时00分00秒
(59.2 days from now).
Features :=
VxVM = Enabled
CPU Count = Not Restricted [/code]
2.[code]root@sun # touch /etc/vx/reconfig.d/state.d/install-db[/code]
3.[code]root@sun # rm /etc/vx/reconfig.d/state.d/root-done[/code]
4.[code]root@sun # vi /etc/system （备份一下）
注释掉或删除掉：
* vxvm_START (do not remove)
forceload: drv/vxdmp
forceload: drv/vxio
forceload: drv/vxspec
forceload: drv/sd
forceload: drv/pcipsy
forceload: drv/ssd
rootdev:/pseudo/vxio@0:0
set vxio:vol_rootdev_is_volume=1
* vxvm_END (do not remove)[/code]
5.[code]root@sun # vi /etc/name_to_major
修改/etc/name_to_major文件，删除下面几行：
vxdmp 291
vxio 292
vxspec 293[/code]
6.拆掉mirror
[code]root@sun # vxplex -o rm dis rootvol-02 swapvol-02[/code]
[code]root@sun # vxprint -ht
Disk group: rootdg
DG NAME NCONFIG NLOG MINORS GROUP-ID
DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE
RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL
RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK
V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE
PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE
SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE
SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE
DC NAME PARENTVOL LOGVOL
SP NAME SNAPVOL DCO
dg rootdg default default 0 1164968519.1025.sun
dm rootdisk c0t0d0s2 sliced 2888 71124291 -
dm rootmirr c0t1d0s2 sliced 2888 71124291 -
v rootvol - ENABLED ACTIVE 20480121 ROUND - root
pl rootvol-01 rootvol ENABLED ACTIVE 20480121 CONCAT - RW
sd rootdisk-02 rootvol-01 rootdisk 50644170 20480121 0 c0t0d0s2 ENA
v swapvol - ENABLED ACTIVE 4191939 ROUND - swap
pl swapvol-01 swapvol ENABLED ACTIVE 4191939 CONCAT - RW
sd rootdisk-01 swapvol-01 rootdisk 0 4191939 0 c0t0d0s2 ENA[/code]
7.[code]root@sun # /etc/vx/bin/vxunroot
This operation will convert the following file systems from
volumes to regular partitions:
rootvol swapvol
Replace volumes in root disk to partitions.
This operation will require a system reboot. If you choose to
continue with this operation, system configuration will be updated
to discontinue use of the volume manager for your root and swap
devices.
Do you wish to do this now [y,n,q,?] (default: y) y
Restoring kernel configuration...
A shutdown is now required to install the new kernel.
You can choose to shutdown now, or you can shutdown later, at your
convenience.
Do you wish to shutdown now [y,n,q,?] (default: n) y
shutdown -g0 -y -i6
Shutdown started. 2006年12月03日 星期日 18时06分57秒 CST
Changing to init state 6 - please wait
Broadcast Message from root (console) on sun 日 12月 3 18:06:58...
THE SYSTEM sun IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged
showmount: sun: RPC: 程序未注册
Hangup
root@sun #
INIT: New run level: 6
The system is coming down. Please wait.
System services are now being stopped.
打印服务已经停止。
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
VEA server is shutting down .
...The system is down.
syncing file systems... done
rebooting...
Resetting ...
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun Enterprise 450 (2 X UltraSPARC-II 480MHz), No Keyboard
OpenBoot 3.18, 2048 MB memory installed, Serial #11947916.
Ethernet address 8:0:20:b6:4f:8c, Host ID: 80b64f8c.
Rebooting with command: boot
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
SunOS Release 5.9 Version Generic_118558-35 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring ATM interfaces:
NOTICE: VxVM not started
configuring IPv4 interfaces: hme0.
Hostname: sun
NOTICE: VxVM not started
NOTICE: VxVM not started
vxvm:vxedit: ERROR: IPC failure: Configuration daemon is not accessible
vxvm:vxedit: ERROR: IPC failure: Configuration daemon is not accessible
Volume Manager: Removing rootdisk from Volume Manager control.
vxvm:vxdisk: ERROR: IPC failure: Configuration daemon is not accessible
vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible
vxvm:vxdisk: ERROR: IPC failure: Configuration daemon is not accessible
vxvm:vxdg: ERROR: IPC failure: Configuration daemon is not accessible
The removal of from rootdg failed. It will be marked as
reserved so no space from it is accidentally allocated
vxvm:vxedit: ERROR: IPC failure: Configuration daemon is not accessible
The system is coming up. Please wait.
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
starting rpc services: rpcbind done.
Setting netmask of hme0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway sun
syslog service starting.
volume management starting.
The system is ready.
Dec 3 18:10:25 sun hme: SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
sun console login: root
Password:
Dec 3 18:10:30 sun login: ROOT LOGIN /dev/console
Last login: Sun Dec 3 17:34:31 from 192.168.1.101
Sun Microsystems Inc. SunOS 5.9 Generic May 2002
You have new mail.
Sourcing //.profile-EIS.....
root@sun # [/code]
8.使用format命令将c0t0d0的3，4分区清空，一般vxvm会默认用这两个分区，清空之前请看清楚：
[code]root@sun # format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0
/pci@1f,4000/scsi@3/sd@1,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
! - execute , then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
! - execute , then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 17531 - 24619 9.77GB (7089/0/0) 20480121
1 swap wu 1 - 1451 2.00GB (1451/0/0) 4191939
2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180
3 - wu 0 - 0 1.41MB (1/0/0) 2889
4 - wu 1 - 24619 33.91GB (24619/0/0) 71124291
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
partition> 3
Part Tag Flag Cylinders Size Blocks
3 - wu 0 - 0 1.41MB (1/0/0) 2889
Enter partition id tag[unassigned]:
Enter partition permission flags[wu]:
Enter new starting cyl[0]:
Enter partition size[2889b, 1c, 0e, 1.41mb, 0.00gb]: 0
partition> p
Current partition table (unnamed):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 17531 - 24619 9.77GB (7089/0/0) 20480121
1 swap wu 1 - 1451 2.00GB (1451/0/0) 4191939
2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180
3 unassigned wu 0 0 (0/0/0) 0
4 - wu 1 - 24619 33.91GB (24619/0/0) 71124291
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
partition> 4
Part Tag Flag Cylinders Size Blocks
4 - wu 1 - 24619 33.91GB (24619/0/0) 71124291
Enter partition id tag[unassigned]:
Enter partition permission flags[wu]:
Enter new starting cyl[1]:
Enter partition size[71124291b, 24619c, 24619e, 34728.66mb, 33.91gb]: 0
partition> p
Current partition table (unnamed):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 17531 - 24619 9.77GB (7089/0/0) 20480121
1 swap wu 1 - 1451 2.00GB (1451/0/0) 4191939
2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180
3 unassigned wu 0 0 (0/0/0) 0
4 unassigned wu 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
partition> la
Ready to label disk, continue? y
partition> q
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
! - execute , then return
quit
format> q[/code]
9.删除vxvm软加包
[code]root@sun # pkginfo |grep VRTS
application VRTSmulic VERITAS License Utilities
application VRTSmuvmp Multi Language VERITAS Volume Manager Management Services Provider
application VRTSob VERITAS Enterprise Administrator Service
application VRTSobgui VERITAS Enterprise Administrator
application VRTSvlic VERITAS License Utilities
system VRTSvmdoc VERITAS Volume Manager (user documentation)
system VRTSvmman VERITAS Volume Manager, Manual Pages
application VRTSvmpro VERITAS Volume Manager Management Services Provider
system VRTSvmzhc VERITAS Volume Manager - Message Catalogs - Chinese
system VRTSvmzhd VERITAS Volume Manager, Chinese Documentation
system VRTSvmzhm VERITAS Volume Manager, Manual Pages - Chinese
system VRTSvxvm VERITAS Volume Manager, Binaries[/code]
[code]root@sun # pkgrm VRTSmulic VRTSmuvmp VRTSob VRTSobgui VRTSvlic VRTSvmdoc VRTSvmman VRTSvmpro VRTSvmzhc VRTSvmzhd VRTSvmzhm VRTSvxvm[/code]
[code]## 删除已安装的包
在这个软件包中包含了正文程序，只有具有超级-用户的权限才能在这个软件包
的安装过程中执行它们.
你想继续删除这个软件包吗 [y,n,?,q] y
## 检查软件包的从属性
## 正在处理软件包信息.
## 正在执行预删除正文[/code]
前面的删除都很顺利，在删除VRTSvxvm这个快结束的时候发生panic了，估计是前面忘了修改/etc/system的原因吧 :oops:
[code] Checking for system volumes:
swap ...
Unloading vxspec driver...
Removing /kernel/drv/vxspec
Removing /kernel/drv/sparcv9/vxspec
Unloading vxio driver...
NOTICE: attempt to unbind major 292 when driver is loaded
panic[cpu1]/thread=30001fe5520: BAD TRAP: type=31 rp=2a1005f7510 addr=28 mmu_fsr=0 occurred in module "vxio" due to a NULL pointer dereference
devfsadm: trap type = 0x31
addr=0x28
pid=893, pc=0x1264a2c, sp=0x2a1005f6db1, tstate=0x1607, context=0x1197
g1-g7: 13368f8, 2005, 30000073508, 28, 78023a7c, 0, 30001fe5520
000002a1005f7230 unix:die+80 (31, 2a1005f7510, 28, 0, 14a2290, fec7a7b0)
%l0-3: 0000000000000000 0000000001413850 000002a1005f7510 000002a1005f7400
%l4-7: 0000000000000031 000003000039ce58 000003000039ce80 0000030001e152a0
000002a1005f7310 unix:trap+8e4 (2a1005f7510, 0, 10000, 10200, 0, fec7a7b0)
%l0-3: 0000000000000001 0000000000000000 00000300026b54b8 0000000000000031
%l4-7: 0000000000000005 0000000000000001 0000000000000000 0000000000000000
000002a1005f7460 unix:ktl0+48 (124, ffffffff, 2a1005f77dc, 2a1005f77ee, 2a1005f7820, 3000041bd40)
%l0-3: 0000000000000000 0000000000001400 0000000000001607 000000000102db68
%l4-7: 0000030002904ac0 0000000000000000 0000000000000000 000002a1005f7510
000002a1005f75b0 vxio:vol_find_device+c (12400000005, 12400000005, 0, 920, 0, 1494400)
%l0-3: 0000000000000000 0000030002904b60 000002a1005f7820 000003000041bd40
%l4-7: 0000000000000000 0000030001fe0248 000000000149a800 000000000009d888
000002a1005f7660 vxio:vxioopen+7c (2a1005f7838, 2005, 78030040, 78023b70, 780301c8, 30000599f28)
%l0-3: 0000000000000000 000002a1005f7838 0000012400000005 0000000001492400
%l4-7: 0000000078023df0 0000000000000000 00000000fe9909fc 00000300026b54b8
000002a1005f7710 specfs:spec_open+114 (12400000005, 124, 30000599f28, 2a1005f7950, 30001e153a0, 30001e152a8)
%l0-3: 0000030001e152a0 0000030001e152a0 0000000000000006 0000030001e153a0
%l4-7: 0000000000002005 0000030000599f28 0000030001fe0248 00000000ffffffff
000002a1005f7840 genunix:vn_openat+414 (0, 0, 2005, 0, 2005, 2000)
%l0-3: 00000000011810e8 0000000000000000 0000000000000000 0000000000000100
%l4-7: 0000000000002005 0000000000000000 00000000fec7a8e0 0000000000000000
000002a1005f79e0 genunix:copen+2e0 (ffffffffffd19553, fec7a8e0, 2005, 0, fec7a85c, fec7a7b0)
%l0-3: 0000000001494400 0000000000000000 0000000000002005 00000000fec7ace8
%l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
syncing file systems... 1 done
dumping to /dev/dsk/c0t1d0s1, offset 65536, content: kernel
100% done: 18031 pages dumped, compression ratio 5.39, dump succeeded
rebooting...
Resetting ...
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun Enterprise 450 (2 X UltraSPARC-II 480MHz), No Keyboard
OpenBoot 3.18, 2048 MB memory installed, Serial #11947916.
Ethernet address 8:0:20:b6:4f:8c, Host ID: 80b64f8c.
Rebooting with command: boot
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
SunOS Release 5.9 Version Generic_118558-35 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: forceload of drv/vxspec failed
WARNING: mod_installdrv: no major number for vxspec
WARNING: vxspec: _init exit1 code 6
WARNING: forceload of drv/vxspec failed
Configuring ATM interfaces:
NOTICE: VxVM not started
configuring IPv4 interfaces: hme0.
Hostname: sun
NOTICE: VxVM not started
NOTICE: VxVM not started
The system is coming up. Please wait.
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
starting rpc services: rpcbind done.
Setting netmask of hme0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway sun
syslog service starting.
Dec 3 18:18:52 sun savecore: saving system crash dump in /var/crash/sun/*.0
Dec 3 18:18:56 sun hme: SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
Running ACT on Crash dump 0
volume management starting.
The system is ready.
sun console login: root
Password:
Dec 3 18:19:21 sun login: ROOT LOGIN /dev/console
Last login: Sun Dec 3 18:10:30 on console
Sun Microsystems Inc. SunOS 5.9 Generic May 2002
You have new mail.
Sourcing //.profile-EIS.....[/code]
[code]root@sun # vi /etc/system
注释掉或删除掉：
* vxvm_START (do not remove)
forceload: drv/vxdmp
forceload: drv/vxio
forceload: drv/vxspec
forceload: drv/sd
forceload: drv/pcipsy
forceload: drv/ssd
rootdev:/pseudo/vxio@0:0
set vxio:vol_rootdev_is_volume=1
* vxvm_END (do not remove)[/code]
[code]root@sun # reboot [/code]
[code]root@sun # pkginfo |grep VRTS
application VRTSob VERITAS Enterprise Administrator Service
system VRTSvxvm VERITAS Volume Manager, Binaries
root@sun # pkgrm VRTSob VRTSvxvm[/code]
这次成功删除:em15:
10.[code]root@sun # rm -r /etc/vx[/code]
[code]root@sun # sync
root@sun # sync
root@sun # sync
root@sun # reboot
Dec 3 18:26:42 sun reboot: rebooted by root
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
Dec 3 18:26:42 rpcbind: rpcbind terminating on signal.
Dec 3 18:26:42 sun syslogd: going down on signal 15
syncing file systems... done
rebooting...
Resetting ...
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun Enterprise 450 (2 X UltraSPARC-II 480MHz), No Keyboard
OpenBoot 3.18, 2048 MB memory installed, Serial #11947916.
Ethernet address 8:0:20:b6:4f:8c, Host ID: 80b64f8c.
Rebooting with command: boot
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
SunOS Release 5.9 Version Generic_118558-35 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring ATM interfaces:
configuring IPv4 interfaces: hme0.
Hostname: sun
Configuring /dev and /devices
TSI: gfxp0 is GFX8P @ 1152x900
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
/kernel/drv/sparcv9/fcsm: undefined symbol 'fc_ulp_get_port_login_params'
WARNING: mod_load: cannot load module 'fcsm'
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
starting rpc services: rpcbind done.
Setting netmask of hme0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway sun
syslog service starting.
volume management starting.
The system is ready.
sun console login: root
Password:
Dec 3 18:30:33 sun login: ROOT LOGIN /dev/console
Last login: Sun Dec 3 18:19:21 on console
Sun Microsystems Inc. SunOS 5.9 Generic May 2002
You have new mail.
Sourcing //.profile-EIS.....
root@sun # bash[/code]
11.安装Vxvm软件：
[code]root@sun # df -k
文件系统 千字节 用了 可用 容量 挂接在
/dev/dsk/c0t0d0s0 10080200 2610469 7368929 27% /
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
swap 3779576 32 3779544 1% /var/run
swap 3779552 8 3779544 1% /tmp
/vol/dev/dsk/c1t6d0/sunw-vm3.5mp1zh
382832 382832 0 100% /cdrom/sunw-vm3.5mp1zh
root@sun # cd /cdrom/cdrom0
root@sun # ls
copyright pkgs support
docs release_notes veritas_enabled
patches scripts win32
root@sun # cd pkgs/
root@sun # ls
VRTSfspro VRTSmuob VRTSob VRTSvmdoc VRTSvmzhc VRTSvxvm
VRTSmufsp VRTSmuobg VRTSobgui VRTSvmman VRTSvmzhd
VRTSmulic VRTSmuvmp VRTSvlic VRTSvmpro VRTSvmzhm
root@sun # pkgadd -d .
下列软件包是可以使用的:
1 VRTSfspro VERITAS File System Management Services Provider
(sparc) 3.5,REV=GA06d
2 VRTSmufsp Multi Language VERITAS File System Management Services Provider
(sparc) 3.5MP1J,REV=GA04
3 VRTSmulic VERITAS License Utilities
(sparc) 3.00.007i
4 VRTSmuob MultiLanguage VERITAS Enterprise Administrator Service - Message Catalogs
(sparc) 3.0.2.261
5 VRTSmuobg Multi Language VERITAS Enterprise Administrator Gui Message - Catalogs
(sparc) 3.0.2.261
6 VRTSmuvmp Multi Language VERITAS Volume Manager Management Services Provider
(sparc) 3.5-MP1,REV=11.20.2002.08.15
7 VRTSob VERITAS Enterprise Administrator Service
(sparc) 3.0.2.261
8 VRTSobgui VERITAS Enterprise Administrator
(sparc) 3.0.2.261
9 VRTSvlic VERITAS License Utilities
(sparc) 3.00.007d
10 VRTSvmdoc VERITAS Volume Manager (user documentation)
(sparc) 3.5,REV=06.24.2002.11.52
... 6 more menu choices to follow;
for more choices, to stop display:
11 VRTSvmman VERITAS Volume Manager, Manual Pages
(sparc) 3.5,REV=06.21.2002.23.14
12 VRTSvmpro VERITAS Volume Manager Management Services Provider
(sparc) 3.5s,REV=06.26.2002.13.38
13 VRTSvmzhc VERITAS Volume Manager - Message Catalogs - Chinese
(sparc) 3.5,REV=11.27.2002.12.35
14 VRTSvmzhd VERITAS Volume Manager, Chinese Documentation
(sparc) 3.5,REV=12.06.2002.15.45
15 VRTSvmzhm VERITAS Volume Manager, Manual Pages - Chinese
(sparc) 3.5,REV=11.27.2002.12.35
16 VRTSvxvm VERITAS Volume Manager, Binaries
(sparc) 3.5,REV=06.21.2002.23.14
选择你要执行的软件包(或选择'全部'执行所有的软件包). (default: all) [?,??,q]: 7 8 9 10 11 12 16[/code]
安装到VRTSvxvm这个包的时候要选择Solaris的系统版本，大家注意一下哈:mrgreen:
[code]处理软件包范例来自
VERITAS Volume Manager, Binaries
(sparc) 3.5,REV=06.21.2002.23.14
Copyright 1996-2002 VERITAS Software Corporation. All rights reserved.
VERITAS, VERITAS SOFTWARE, the VERITAS logo and all other VERITAS
product names and slogans are trademarks or registered
trademarks of VERITAS Software Corporation in the USA and/or other
countries. Other product names and/or slogans mentioned herein may
be trademarks or registered trademarks of their respective companies.
This package, VxVM 3.5, is supported on Solaris 2.6, 7, 8, and 9.
You appear to be running Solaris 9. Press ENTER to install VxVM
3.5 for Solaris 9, or enter another Solaris version number if you
are certain that you want to install the drivers for a different
release of Solaris.
Install for which version of Solaris?
[9, 8, 7, 2.6] (default: 9):
Installing VxVM for Solaris 9
。。。。。
[/code]
12.重新封装根盘：
[code]root@sun # vxinstall
VxVM uses license keys to control access. If you have a SPARCstorage
Array (SSA) controller or a Sun Enterprise Network Array (SENA) controller
attached to your system, then VxVM will grant you a limited use license
automatically. The SSA and/or SENA license grants you unrestricted use
of disks attached to an SSA or SENA controller, but disallows striping,
RAID-5, and DMP on non-SSA and non-SENA disks. If you are not running an
SSA or SENA controller, then you must obtain a license key to operate.
Licensing information:
System host ID: 80b64f8c
Host type: SUNW,Ultra-4
SPARCstorage Array or Sun Enterprise Network Array: No arrays found
No valid licenses found.
VM lite/full license(s) is needed to proceed with vxinstall.
Are you prepared to enter a license key [y,n,q,?] (default: y) y
VERITAS License Manager vxlicinst utility version 3.00.007d
Copyright (C) VERITAS Software Corp 2002. All Rights reserved.
Enter your license key : XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX
Number of days left for Demo = 59
License key successfully installed for VERITAS Volume Manager
Do you wish to enter another license key [y,n,q,?] (default: n)
Volume Manager Installation
Menu: VolumeManager/Install
VxVM will use the following format to name disks on the host:
_
In the above format, is the logical name of the enclosure
to which the disk belongs. VxVM assigns default enclosure names which can
be changed according to the user requirements.
Some examples would be:
hitachi0_2 - second disk detected in enclosure 'hitachi0'
enggdept_2 - second disk detected in enclosure 'enggdept'
dgc1_1 - first disk detected in enclosure 'dgc1'
jbod_1 - first disk detected in the jbod category
For non-public loop disks (Ex. FC disks directly connected to the host
or through hubs), you could choose to use the c#t#d#s# naming format.
Do you want to use enclosure based names for all disks ?
[y,n,q,?] (default: n)
Generating list of attached disk arrays....
Volume Manager Installation
Menu: VolumeManager/Install
The Volume Manager has detected the following categories of storage
connected to your system:
Enclosures: OTHER_DISKS
Hit RETURN to continue.
Volume Manager Installation
Menu: VolumeManager/Install
You will now be asked if you wish to use Quick Installation or
Custom Installation. Custom Installation allows you to select how
the Volume Manager will handle the installation of each disk
attached to your system.
Quick Installation examines each disk attached to your system and
attempts to create volumes to cover all disk partitions that might
be used for file systems or for other similar purposes.
If you want to exclude any devices from being seen by VxVM or not
be multipathed by vxdmp then use the Prevent multipathing/Suppress
devices from VxVM's view option, before you choose Custom Installation
or Quick Installation.
If you do not wish to use some disks with the Volume Manager, or if
you wish to reinitialize some disks, use the Custom Installation
option Otherwise, we suggest that you use the Quick Installation
option.
Hit RETURN to continue.
Volume Manager Installation Options
Menu: VolumeManager/Install
1 Quick Installation
2 Custom Installation
3 Prevent multipathing/Suppress devices from VxVM's view
? Display help about menu
?? Display help about the menuing system
q Exit from menus
Select an operation to perform: 2
Volume Manager Custom Installation
Menu: VolumeManager/Install/Custom
The c0t0d0 disk is your Boot Disk. You can not add it as a new
disk. If you encapsulate it, you will make your root file system
and other system areas on the Boot Disk into volumes. This is
required if you wish to mirror your root file system or system
swap area.
Encapsulate Boot Disk [y,n,q,?] (default: n) y
Enter disk name for [,q,?] (default: rootdisk)
The c0t0d0 disk has been configured for encapsulation.
Hit RETURN to continue.
Volume Manager Custom Installation
Menu: VolumeManager/Install/Custom/OTHER_DISKS
Disk array serial number : OTHER_DISKS
Generating list of disks in disk array OTHER_DISKS....
The Volume Manager has detected the following disks in enclosure OTHER_DISKS:
c0t1d0
Hit RETURN to continue.
Installation options for controller OTHER_DISKS
Menu: VolumeManager/Install/Custom/OTHER_DISKS
1 Install all disks as pre-existing disks. (encapsulate)
2 Install all disks as new disks. (discards data on disks!)
3 Install one disk at a time.
4 Leave these disks alone.
? Display help about menu
?? Display help about the menuing system
q Exit from menus
Select an operation to perform: 4
Volume Manager Custom Installation
Menu: VolumeManager/Install/Custom/OTHER_DISKS
The following is a summary of your choices.
c0t0d0 Encapsulate
Is this correct [y,n,q,?] (default: y) y
The system now must be shut down and rebooted in order to continue
the reconfiguration.
Shutdown and reboot now [y,n,q,?] (default: n) y
Shutdown started. 2006年12月03日 星期日 18时41分17秒 CST
Changing to init state 6 - please wait
Broadcast Message from root (console) on sun 日 12月 3 18:41:17...
THE SYSTEM sun IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged
showmount: sun: RPC: 程序未注册
root@sun #
INIT: New run level: 6
The system is coming down. Please wait.
System services are now being stopped.
打印服务已经停止。
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
Request is in process..
Server was not running
The system is down.
syncing file systems... done
rebooting...
Resetting ...
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun Enterprise 450 (2 X UltraSPARC-II 480MHz), No Keyboard
OpenBoot 3.18, 2048 MB memory installed, Serial #11947916.
Ethernet address 8:0:20:b6:4f:8c, Host ID: 80b64f8c.
Rebooting with command: boot
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
SunOS Release 5.9 Version Generic_118558-35 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring ATM interfaces:
NOTICE: VxVM not started
configuring IPv4 interfaces: hme0.
Hostname: sun
NOTICE: VxVM not started
Configuring /dev and /devices
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
TSI: gfxp0 is GFX8P @ 1152x900
/kernel/drv/sparcv9/fcsm: undefined symbol 'fc_ulp_get_port_login_params'
WARNING: mod_load: cannot load module 'fcsm'
Configuring the /dev directory (compatibility devices)
NOTICE: VxVM not started
The Volume Manager is now reconfiguring (partition phase)...
Volume Manager: Partitioning c0t0d0 as an encapsulated disk.
/dev/dsk/c0t0d0s1 was dump device --
invoking dumpadm(1M) -d swap to select new dump device
The Volume Manager is now reconfiguring (initialization phase)...
Volume Manager: Adding rootdisk (c0t0d0) as an encapsulated disk.
vxvm:vxconfigd: WARNING: Disk c0t1d0s2 names group rootdg, but group ID differs
The Volume Daemon has been enabled for transactions.
Adding volumes for c0t0d0...
Starting new volumes...
Updating /etc/vfstab...
Remove encapsulated partitions...
The Volume Manager will now set up your Boot Disk as a managed disk.
Saving original configuration...
16 blocks
The system will now be rebooted.
syncing file systems... done
rebooting...
Resetting ...
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun Enterprise 450 (2 X UltraSPARC-II 480MHz), No Keyboard
OpenBoot 3.18, 2048 MB memory installed, Serial #11947916.
Ethernet address 8:0:20:b6:4f:8c, Host ID: 80b64f8c.
Rebooting with command: boot
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
SunOS Release 5.9 Version Generic_118558-35 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run fsck(1M)
Configuring ATM interfaces:
Starting VxVM restore daemon...
VxVM starting in boot mode...
/usr/sbin/prtconf: getexecname() failed
vxvm:vxconfigd: WARNING: Disk c0t1d0s2 names group rootdg, but group ID differs
configuring IPv4 interfaces: hme0.
Hostname: sun
VxVM starting special volumes ( swapvol rootvol )...
Configuring /dev and /devices
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
TSI: gfxp0 is GFX8P @ 1152x900
/kernel/drv/sparcv9/fcsm: undefined symbol 'fc_ulp_get_port_login_params'
WARNING: mod_load: cannot load module 'fcsm'
Configuring the /dev directory (compatibility devices)
VxVM general startup...
vxvm: NOTE: Setting partition /dev/dsk/c0t0d0s1 as the dump device
The system is coming up. Please wait.
SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
starting rpc services: rpcbind done.
Setting netmask of hme0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway sun
syslog service starting.
No VVR license installed on the system; vradmind not started.
No VVR license installed on the system; in.vxrsyncd not started.
volume management starting.
The system is ready.
sun console login: root
Password:
Last login: Sun Dec 3 18:30:33 on console
Dec 3 18:48:14 sun login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.9 Generic May 2002
You have new mail.
Sourcing //.profile-EIS.....
root@sun # eject
root@sun # vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced rootdisk rootdg online
c0t1d0s2 sliced - - online[/code]
13.重新对根盘做镜像：
[code]root@sun # vxdiskunsetup -C c0t1d0
root@sun # vxdisksetup -i c0t1d0
root@sun # vxdg adddisk mirrdisk=c0t1d0
root@sun # vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced rootdisk rootdg online
c0t1d0s2 sliced mirrdisk rootdg online
root@sun # vxmirror rootdisk mirrdisk &
[1] 919
root@sun # vxtask list
TASKID PTID TYPE/STATE PCT PROGRESS
161 ATCOPY/R 00.76% 0/20480121/155000 PLXATT rootvol rootvol-02
root@sun # vxtask list
TASKID PTID TYPE/STATE PCT PROGRESS
161 ATCOPY/R 01.78% 0/20480121/363816 PLXATT rootvol rootvol-02
root@sun # vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced rootdisk rootdg online
c0t1d0s2 sliced mirrdisk rootdg online[/code]
14.最终完成对根盘的反封装和重新封装及镜像：
[code]root@sun # vxprint -ht
Disk group: rootdg
DG NAME NCONFIG NLOG MINORS GROUP-ID
DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE
RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL
RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK
V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE
PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE
SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE
SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE
DC NAME PARENTVOL LOGVOL
SP NAME SNAPVOL DCO
dg rootdg default default 0 1165142675.1025.sun
dm mirrdisk c0t1d0s2 sliced 2888 71124291 -
dm rootdisk c0t0d0s2 sliced 2888 71124291 -
v rootvol - ENABLED ACTIVE 20480121 ROUND - root
pl rootvol-01 rootvol ENABLED ACTIVE 20480121 CONCAT - RW
sd rootdisk-02 rootvol-01 rootdisk 50644170 20480121 0 c0t0d0 ENA
pl rootvol-02 rootvol ENABLED ACTIVE 20480121 CONCAT - RW
sd mirrdisk-01 rootvol-02 mirrdisk 0 20480121 0 c0t1d0 ENA
v swapvol - ENABLED ACTIVE 4191939 ROUND - swap
pl swapvol-01 swapvol ENABLED ACTIVE 4191939 CONCAT - RW
sd rootdisk-01 swapvol-01 rootdisk 0 4191939 0 c0t0d0 ENA
pl swapvol-02 swapvol ENABLED ACTIVE 4191939 CONCAT - RW
sd mirrdisk-02 swapvol-02 mirrdisk 20480121 4191939 0 c0t1d0 ENA[/code]
如有类同，纯属巧合
