linux下如何实现的客户端修改svn密码

文件:	ChangePasswd.rar
大小:	2KB
下载:	下载

注意：   

                  1、ChangePasswd.ini、ChangePasswd.cgi必须放在apache的cgi-bin(根据自己电脑上的路径来，我的是/var/www/cgi-bin)下。

            2、以下脚本是改动网上查找脚本之后的成果。

            3、修改密码文件的所有者是apache,如果不是，执行chown apache:apache passwd(密码文件)。

            4、如果密码是用htpasswd -c 或-m所建，执行htpasswd -b /etc/httpd/passwd usrname password更新。

            /etc/httpd/passwd     //密码路径

            usrname                     //用户名

            password                   //用户名所对应的密码。

            5.需改动地方我已经用红色标出，别的请不要随意改动。

一、创建ChangePasswd.ini文件

创建一个空文件：

a.将其命名为ChangePasswd.ini并将以下内容复制到此文件中。

b.注意将以下红色部分改为你自己的路径。第一行为所建用户和密码文件的路径。第二行为修改密码的日志的路径（该文件是自己建的）。 

[path]
authuserfile=/etc/httpd/passwd
logfile=/var/www/cgi-bin/ChangePasswd.log
[setup]
pwdminlen=6
[html]
title=SVN用户密码自助修改
description=SVN用户密码自助修改
yourname=用户名
oldpwd=旧密码
newpwd1=新密码
newpwd2=确认新密码
btn_change=修 改
btn_reset=重 置

changepwdok=成功修改密码
changepwdfailed=修改密码失败
servererror=服务器错误
passmustgreater=新密码位数必须大于
twopassnotmatched=两密码不一致
entername=请输入用户名
enterpwd=密码未输入
errorpwd=你的密码不正确
back=返回

  

二、创建ChangePasswd.cgi文件并设置其权限。

创建一个空文件，将以下内容复制到创建的文件里并更名为ChangePasswd.cgi，设置其权限为755（可执行）

命令：chmod 755 ChangePasswd.cgi.

#!/usr/bin/perl -w

use strict;
use CGI;
my $time        = localtime;
my $remote_id   = $ENV{REMOTE_HOST} || $ENV{REMOTE_ADDR};
my $admin_email = $ENV{SERVER_ADMIN};

my $cgi = new CGI;
my $pwd_not_alldiginal = "密码不能全为数字";
my $pwd_not_allchar = "密码不能全为字符";
my $user_not_exists ="该用户不存在";
my $file_not_found ="文件不存在,请联系管理员";

my $authuserfile;
my $logfile;
my $pwdminlen;
my $title;
my $description;
my $yourname;
my $oldpwd;
my $newpwd1;
my $newpwd2;
my $btn_change;
my $btn_reset;

my $changepwdok;
my $changepwdfailed;
my $oldpwderror;
my $passmustgreater;
my $twopassnotmatched;
my $entername;
my $enterpwd;
my $errorpwd;
my $back;


&IniInfo;

if ($cgi -> param())
{#8
my $User = $cgi->param('UserName');
my $UserPwd = $cgi->param('OldPwd');
my $UserNewPwd = $cgi->param('NewPwd1');
my $MatchNewPwd = $cgi->param('NewPwd2');


if (!$User)
     {&Writer_Log("Enter no user name");
       &otherhtml($title,$entername,$back);}
elsif (!$UserPwd )
    {&Writer_Log("Enter no OldPasswd");
     &otherhtml($title,$enterpwd,$back); }
elsif (length($UserNewPwd)<$pwdminlen)
    {&Writer_Log("Password's length must greater than".$pwdminlen);
     &otherhtml($title,$passmustgreater.$pwdminlen,$back);}
elsif ($UserNewPwd =~/^\d+$/)
    {&Writer_Log("New Passwd isn't all diginal");
     &otherhtml($title,$pwd_not_alldiginal,$back);}
elsif ($UserNewPwd =~/^[A-Za-z]+$/)
    {&Writer_Log("New Passwd isn't all char");
     &otherhtml($title,$pwd_not_allchar,$back);}
elsif ($UserNewPwd ne $MatchNewPwd)
    {&Writer_Log("Two new passwords are not matched");
     &otherhtml($title,$twopassnotmatched,$back);}
else
{if($authuserfile)
{#6
open UserFile, "<$authuserfile" or die "打开文件失败：$!";
while ()
    {#5
       my $varstr=$_;

       if($varstr =~/($User)/)
    {#3
     my $eqpos =index($varstr, ":");
     my $UserName = substr($varstr,0,$eqpos);
     my $cryptpwd = substr($varstr,$eqpos + 1,13);
   
     next if($UserName ne $User);
       
     if(crypt($UserPwd,$cryptpwd) eq $cryptpwd)
     {#a
      my $rc = system("/usr/bin/htpasswd -b $authuserfile $User $UserNewPwd");
      if ($rc == 0)
         {#1
            &Writer_Log( $User."：Change Passwd");
            &otherhtml($title,$changepwdok,$back);
          }#1
       else
          {#2
           &Writer_Log( $User."：Change Passwd Failed");
           &otherhtml($title,$changepwdfailed,$back);
          }#2
       exit;
     }#a
     else
     {#b
      &Writer_Log("Old Passwd is Incorrect ");
      &otherhtml($title,$errorpwd,$back);
     }#b
     exit;      
    }#3
       else
    {#4
     if(eof)
     { &Writer_Log($User."：no this user");
       &otherhtml($title,$user_not_exists,$back);
       exit;
     }
     else
     {next;}
    }#4  
     }#5
   close UserFile;
}#6
else
{#7
   &Writer_Log($authuserfile."：no found");
   &otherhtml($title,$file_not_found,$back);
}#7
}
}#8
else
{&Index_Html;}

sub IniInfo{
my $inifile = "/var/www/cgi-bin/ChangePasswd.ini";
open CGI_INI_FILE, "<$inifile" or die "打开文件失败：$!";;
while ()
{
my $eqpos =index($_,'=');
my $len = length($_);

if ($_ =~/authuserfile/)
{$authuserfile= substr($_, $eqpos + 1, $len - $eqpos -2);}
elsif ($_ =~/logfile/)
{$logfile= substr($_, $eqpos + 1);}
elsif ($_ =~/pwdminlen/)
{$pwdminlen= substr($_, $eqpos + 1);}
elsif ($_ =~/title/)
{$title = substr($_, $eqpos + 1);}
elsif ($_ =~/description/)
{$description = substr($_, $eqpos + 1);}
elsif ($_ =~/yourname/)
{$yourname = substr($_, $eqpos + 1);}
elsif ($_ =~/oldpwd/)
{$oldpwd= substr($_, $eqpos + 1);}
elsif ($_ =~/newpwd1/)
{$newpwd1= substr($_, $eqpos + 1);}
elsif ($_ =~/newpwd2/)
{$newpwd2= substr($_, $eqpos + 1);}
elsif ($_ =~/btn_change/)
{$btn_change = substr($_, $eqpos + 1);}
elsif ($_ =~/btn_reset/)
{$btn_reset = substr($_, $eqpos + 1);}
elsif ($_ =~/changepwdok/)
{$changepwdok = substr($_, $eqpos + 1);}
elsif ($_ =~/changepwdfailed/)
{$changepwdfailed = substr($_, $eqpos + 1);}
elsif ($_ =~/oldpwderror/)
{$oldpwderror = substr($_, $eqpos + 1);}
elsif ($_ =~/passmustgreater/)
{$passmustgreater = substr($_, $eqpos + 1);}
elsif ($_ =~/twopassnotmatched/)
{$twopassnotmatched = substr($_, $eqpos + 1);}
elsif ($_ =~/entername/)
{$entername = substr($_, $eqpos + 1);}
elsif ($_ =~/enterpwd/)
{$enterpwd= substr($_, $eqpos + 1);}
elsif ($_ =~/errorpwd/)
{$errorpwd= substr($_, $eqpos + 1);}
elsif ($_ =~/back/)
{$back = substr($_, $eqpos + 1);}
}
close CGI_INI_FILE;
}

sub Index_Html
{
print "Content-type: text/html\n\n";
print <

---

$description

$yourname
$oldpwd
$newpwd1
$newpwd2

---

注意:新密码位数必需大于$pwdminlen，且为字母与数字组合



END_OF_PAGE
}

sub otherhtml{
print "Content-type: text/html\n\n";

print <

$_[1]

$_[2]

---

END_OF_PAGE
}

sub Writer_Log{
if($logfile)
{
my $loginfo ="[".$time."] "." [".$remote_id."] "." || ".$_[0];
open LOGFILE,">>$logfile" or die "Couldn't open LOG FILE for writing: $!";
print LOGFILE ("$loginfo\n");
close LOGFILE;
}
}

三、创建ChangePasswd.log文件并设置其权限。

 

进入目标位置（即你想创建ChangePasswd.log的位置），如： /var/www/cgi-bin(根据自己的位置定)，创建一个名为ChangePasswd.log的文件并赋予该文件写的权限：

命令：chmod 666 ChangePasswd.log

四、修改密码

通过修改密码。

 

80对应自己设置的端口。