自己制作开机画面-bootsplash

自己制作开机画面-bootsplash

前段时间见到论坛里有这个话题，好象搞的人不多，今天有时间，发一篇文章，希望广大debian人自己动手，DIY出精美的开机画面。
以下参考
一、打内核补丁并编译内核
以内核2.4.20为例，假设内核源文件安装在/usr/src/linux/。下载bootsplash 3.07(地址： )，然后：

代码:

yourbox:~ # cd /usr/src/linux
yourbox:/usr/src/linux # patch -p1 < /path/to/bootsplash-3.0.7-2.4.20-vanilla.diff
patching file drivers/char/console.c
patching file drivers/char/keyboard.c
patching file drivers/char/n_tty.c
patching file drivers/video/Config.in
patching file drivers/video/Makefile
patching file drivers/video/fbcon-jpegdec.c
patching file drivers/video/fbcon-jpegdec.h
patching file drivers/video/fbcon-splash.c
patching file drivers/video/fbcon-splash.h
patching file drivers/video/fbcon-splash16.c
patching file drivers/video/fbcon.c
patching file include/video/fbcon.h
patching file kernel/panic.c
yourbox:/usr/src/linux #

配 置内核，如make menuconfig或make xconfig，在"Console drivers" -> "Frame-Buffer support" 选择 "VESA VGA graphics console" 或其他与你的显卡相应的驱动。打开 "Use splash screen instead of boot logo". 在 "Block Devices"中打开"Initial Ramdisk support"，保存配置并编译内核，将生成的内核拷到/boot 下，并修改lilo或grub的配置文件以使用新的内核来启动。

二、加入图片
下载并安装splash工具：

代码:

# cd ~/splash
# tar xvjf splashutils.tar.bz2
splashutils/
splashutils/Makefile
splashutils/splash.c
[..]
splashutils/ChangeLog
splashutils/COPYING
# cd splashutils
# make splash
gcc -Os -Wall -c -o splash.o splash.c
gcc -Os -Wall -o splash splash.o
strip splash
# cp splash /sbin/
# cd ..

将图片及相关的信息加入到initrd中去:

代码:

/sbin/splash -s -f /etc/bootsplash/themes/yourtheme/config/bootsplash-1024x768.cfg >> /boot/initrd.splash

图片等可以从 下载

三、运行lilo更新配置文件(grub就不用更新了)，重新启动，如果一切正常，就可以看到启动画面了。同时会有这样一些信息：

代码:

vesafb: framebuffer at 0xf0000000, mapped to 0xdc816000, size 65472k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:5137
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 11165 bytes, found (1024x768, 4912 bytes, v3)
Got silent jpeg.