Nokia N900 刷机

I just flash my pr-production phone sucessfully just now, so pls follow my steps to flash yours:
1. Turn the phone into flash mode, don't ask me how
2. Why flasher can't flash the image in your phone:confused: The answer is the HW Revision, you HW revision is lower than what the image requires, so we need to change the HW Revision first. Using this order: "flasher.exe --set-hw-revision=2101" (Of course you can change the 4-digital number to the latest one), then plug out the usb cable, turn off the phone by removing the battery
3. Turn the phone into flash mode again, and now we'll flash the OS into the phone, using this order: "flasher.exe -f IMAGE Name -F" and the flasher is working on writing the image to the phone, it'll take about 2~3 minutes, and then restart your phone manually (I don't add the "-R" for it'll show a mistake when flashing the cmt-mcusw at the first time)
4. Turn on your phone and enjoy your new life with N900!:cool:

i get the same problem. my device is loan machine from Nokia Forum to test my app. can't find sim card. then i flash the machine with the same error "....need x-loader....". but the hw version number is 2001. can't flash the latest 2010 firmware. then overwrite the hw version to 2101 as above suggestion. everything is ok. thanks a lot, Andy.

 

今天冷刷救回了已经深度变成砖头的小9

具体怎么折腾成砖头的就不说了，比较复杂。
问题比较大，根本无法刷机了，按着U连接USB根本无法进入刷机模式，
以为要去求助客服了，
Google后，找到了冷刷的方法，步骤 如下：
1、拆下电池；
2、连接USB线；
3、执行冷刷命令：flasher-3.5 -c -h RX-51:2201 -S usb -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin -f
     然后插上手机电池，发现进入刷机模式了；
4、刷机居然失败了，提示：usb_bulk_write: Resource temporarily unavailable，脑门出汗了。。。
5、发现手机仍在刷机模式，在继续刷机：执行正常刷机命令flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin -f
     还是一样报错，有连续执行了3次，终于正常刷下去了
6、刷完后又把eMMC重刷了。
7、开机小9又活了。。。