事实上，在ubuntu 9.10下的编译器（gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ）使用以上的参数并不能解决问题，依然会提示waring和error: call to ‘__open_missing_mode’。
S_ISREG ( ) 普通文件
S_ISDIR ( ) 目录文件
S_ISCHR ( ) 字符特殊文件
S_ISBLK ( ) 块特殊文件
S_ISFIFO ( ) 管道或F I F O
S_ISLNK ( ) 符号连接（ P O S I X . 1或S V R 4无此类型）
S_ISSOC K ( ) 套接字（P O S I X . 1或S V R 4无此类型）
==============================================================================
附上open函数标志位的定义：
man open
OPEN(2) Linux Programmer’s Manual OPEN(2)
NAME
open, creat - open and possibly create a file or device
SYNOPSIS
#include
#include
#include
int open(const char *pathname, int flags);
int open(const char *pathname, int flags, mode_t mode);
int creat(const char *pathname, mode_t mode);
DESCRIPTION
Given a pathname for a file, open() returns a file descriptor, a small, non-negative integer for use in subse-quent system calls (read(2), write(2), lseek(2), fcntl(2), etc.). The file descriptor returned by a successful call will be the lowest-numbered file descriptor not currently open for the process.
By default, the new file descriptor is set to remain open across an execve(2) (i.e., the FD_CLOEXEC file descriptor flag described in fcntl(2) is initially disabled; the Linux-specific O_CLOEXEC flag, described below, can be used to change this default). The file offset is set to the beginning of the file (see lseek(2)).
A call to open() creates a new open file description, an entry in the system-wide table of open files. This entry records the file offset and the file status flags (modifiable via the fcntl(2) F_SETFL operation). A
file descriptor is a reference to one of these entries; this reference is unaffected if pathname is subse-
quently removed or modified to refer to a different file. The new open file description is initially not
shared with any other process, but sharing may arise via fork(2).
The argument flags must include one of the following access modes: O_RDONLY, O_WRONLY, or O_RDWR. These
request opening the file read-only, write-only, or read/write, respectively.
In addition, zero or more file creation flags and file status flags can be bitwise-or’d in flags. The file
creation flags are O_CREAT, O_EXCL, O_NOCTTY, and O_TRUNC. The file status flags are all of the remaining
flags listed below. The distinction between these two groups of flags is that the file status flags can be
retrieved and (in some cases) modified using fcntl(2). The full list of file creation flags and file status
flags is as follows:
O_APPEND
The file is opened in append mode. Before each write(2), the file offset is positioned at the end of
the file, as if with lseek(2). O_APPEND may lead to corrupted files on NFS file systems if more than
one process appends data to a file at once. This is because NFS does not support appending to a file,
so the client kernel has to simulate it, which can’t be done without a race condition.
O_ASYNC
Enable signal-driven I/O: generate a signal (SIGIO by default, but this can be changed via fcntl(2))
when input or output becomes possible on this file descriptor. This feature is only available for ter-
minals, pseudo-terminals, sockets, and (since Linux 2.6) pipes and FIFOs. See fcntl(2) for further
details.
O_CLOEXEC (Since Linux 2.6.23)
Enable the close-on-exec flag for the new file descriptor. Specifying this flag permits a program to
avoid an additional fcntl(2) F_SETFD operation to set the FD_CLOEXEC flag. Additionally, use of this
flag is essential in some multithreaded programs since using a separate fcntl(2) F_SETFD operation to
set the FD_CLOEXEC flag does not suffice to avoid race conditions where one thread opens a file descrip-
tor at the same time as another thread does a fork(2) plus execve(2).
O_CREAT
If the file does not exist it will be created. The owner (user ID) of the file is set to the effective
user ID of the process. The group ownership (group ID) is set either to the effective group ID of the
process or to the group ID of the parent directory (depending on file system type and mount options, and
the mode of the parent directory, see the mount options bsdgroups and sysvgroups described in mount(8)).
mode specifies the permissions to use in case a new file is created. This argument must be supplied
when O_CREAT is specified in flags; if O_CREAT is not specified, then mode is ignored. The effective
permissions are modified by the process’s umask in the usual way: The permissions of the created file
are (mode & ~umask). Note that this mode only applies to future accesses of the newly created file; the
open() call that creates a read-only file may well return a read/write file descriptor.
The following symbolic constants are provided for mode:
S_IRWXU 00700 user (file owner) has read, write and execute permission
S_IRUSR 00400 user has read permission
S_IWUSR 00200 user has write permission
S_IXUSR 00100 user has execute permission
S_IRWXG 00070 group has read, write and execute permission
S_IRGRP 00040 group has read permission
S_IWGRP 00020 group has write permission
S_IXGRP 00010 group has execute permission
S_IRWXO 00007 others have read, write and execute permission
S_IROTH 00004 others have read permission
S_IWOTH 00002 others have write permission
S_IXOTH 00001 others have execute permission
O_DIRECT (Since Linux 2.4.10)
Try to minimize cache effects of the I/O to and from this file. In general this will degrade perfor-
mance, but it is useful in special situations, such as when applications do their own caching. File I/O
is done directly to/from user space buffers. The I/O is synchronous, that is, at the completion of a
read(2) or write(2), data is guaranteed to have been transferred. See NOTES below for further discus-
sion.
A semantically similar (but deprecated) interface for block devices is described in raw(8).
O_DIRECTORY
If pathname is not a directory, cause the open to fail. This flag is Linux-specific, and was added in
kernel version 2.1.126, to avoid denial-of-service problems if opendir(3) is called on a FIFO or tape
device, but should not be used outside of the implementation of opendir(3).
O_EXCL Ensure that this call creates the file: if this flag is specified in conjunction with O_CREAT, and path-
name already exists, then open() will fail. The behavior of O_EXCL is undefined if O_CREAT is not spec-
ified.
When these two flags are specified, symbolic links are not followed: if pathname is a symbolic link,
then open() fails regardless of where the symbolic link points to.
O_EXCL is only supported on NFS when using NFSv3 or later on kernel 2.6 or later. In environments where
NFS O_EXCL support is not provided, programs that rely on it for performing locking tasks will contain a
race condition. Portable programs that want to perform atomic file locking using a lockfile, and need
to avoid reliance on NFS support for O_EXCL, can create a unique file on the same file system (e.g.,
incorporating hostname and PID), and use link(2) to make a link to the lockfile. If link(2) returns 0,
the lock is successful. Otherwise, use stat(2) on the unique file to check if its link count has
increased to 2, in which case the lock is also successful.
O_LARGEFILE
(LFS) Allow files whose sizes cannot be represented in an off_t (but can be represented in an off64_t)
to be opened. The _LARGEFILE64_SOURCE macro must be defined in order to obtain this definition. Set-
ting the _FILE_OFFSET_BITS feature test macro to 64 (rather than using O_LARGEFILE) is the preferred
method of obtaining method of accessing large files on 32-bit systems (see feature_test_macros(7)).
O_NOATIME (Since Linux 2.6.8)
Do not update the file last access time (st_atime in the inode) when the file is read(2). This flag is
intended for use by indexing or backup programs, where its use can significantly reduce the amount of
disk activity. This flag may not be effective on all file systems. One example is NFS, where the
server maintains the access time.
O_NOCTTY
If pathname refers to a terminal device — see tty(4) — it will not become the process’s controlling ter-
minal even if the process does not have one.
O_NOFOLLOW
If pathname is a symbolic link, then the open fails. This is a FreeBSD extension, which was added to
Linux in version 2.1.126. Symbolic links in earlier components of the pathname will still be followed.
O_NONBLOCK or O_NDELAY
When possible, the file is opened in non-blocking mode. Neither the open() nor any subsequent opera-
tions on the file descriptor which is returned will cause the calling process to wait. For the handling
of FIFOs (named pipes), see also fifo(7). For a discussion of the effect of O_NONBLOCK in conjunction
with mandatory file locks and with file leases, see fcntl(2).
O_SYNC The file is opened for synchronous I/O. Any write(2)s on the resulting file descriptor will block the
calling process until the data has been physically written to the underlying hardware. But see NOTES
below.
O_TRUNC
If the file already exists and is a regular file and the open mode allows writing (i.e., is O_RDWR or
O_WRONLY) it will be truncated to length 0. If the file is a FIFO or terminal device file, the O_TRUNC
flag is ignored. Otherwise the effect of O_TRUNC is unspecified.
Some of these optional flags can be altered using fcntl(2) after the file has been opened.
creat() is equivalent to open() with flags equal to O_CREAT|O_WRONLY|O_TRUNC.
RETURN VALUE
open() and creat() return the new file descriptor, or -1 if an error occurred (in which case, errno is set
appropriately).
ERRORS
EACCES The requested access to the file is not allowed, or search permission is denied for one of the directo-
ries in the path prefix of pathname, or the file did not exist yet and write access to the parent direc-
tory is not allowed. (See also path_resolution(7).)
EEXIST pathname already exists and O_CREAT and O_EXCL were used.
EFAULT pathname points outside your accessible address space.
EFBIG pathname refers to a regular file, too large to be opened; see O_LARGEFILE above. (POSIX.1-2001 speci-
fies the error EOVERFLOW for this case.)
EINTR While blocked waiting to complete an open of a slow device (e.g., a FIFO; see fifo(7)), the call was
interrupted by a signal handler; see signal(7).
EISDIR pathname refers to a directory and the access requested involved writing (that is, O_WRONLY or O_RDWR is
set).
ELOOP Too many symbolic links were encountered in resolving pathname, or O_NOFOLLOW was specified but pathname
was a symbolic link.
EMFILE The process already has the maximum number of files open.
ENAMETOOLONG
pathname was too long.
ENFILE The system limit on the total number of open files has been reached.
ENODEV pathname refers to a device special file and no corresponding device exists. (This is a Linux kernel
bug; in this situation ENXIO must be returned.)
ENOENT O_CREAT is not set and the named file does not exist. Or, a directory component in pathname does not
exist or is a dangling symbolic link.
ENOMEM Insufficient kernel memory was available.
ENOSPC pathname was to be created but the device containing pathname has no room for the new file.
ENOTDIR
A component used as a directory in pathname is not, in fact, a directory, or O_DIRECTORY was specified
and pathname was not a directory.
ENXIO O_NONBLOCK | O_WRONLY is set, the named file is a FIFO and no process has the file open for reading.
Or, the file is a device special file and no corresponding device exists.
EPERM The O_NOATIME flag was specified, but the effective user ID of the caller did not match the owner of the
file and the caller was not privileged (CAP_FOWNER).
EROFS pathname refers to a file on a read-only file system and write access was requested.
ETXTBSY
pathname refers to an executable image which is currently being executed and write access was requested.
EWOULDBLOCK
The O_NONBLOCK flag was specified, and an incompatible lease was held on the file (see fcntl(2)).
CONFORMING TO
SVr4, 4.3BSD, POSIX.1-2001. The O_DIRECTORY, O_NOATIME, and O_NOFOLLOW flags are Linux-specific, and one may
need to define _GNU_SOURCE to obtain their definitions.
The O_CLOEXEC flag is not specified in POSIX.1-2001, but is specified in POSIX.1-2001.
O_DIRECT is not specified in POSIX; one has to define _GNU_SOURCE to get its definition.
NOTES
Under Linux, the O_NONBLOCK flag indicates that one wants to open but does not necessarily have the intention
to read or write. This is typically used to open devices in order to get a file descriptor for use with
ioctl(2).
Unlike the other values that can be specified in flags, the access mode values O_RDONLY, O_WRONLY, and O_RDWR,
do not specify individual bits. Rather, they define the low order two bits of flags, and are defined respec-
tively as 0, 1, and 2. In other words, the combination O_RDONLY | O_WRONLY is a logical error, and certainly
does not have the same meaning as O_RDWR. Linux reserves the special, non-standard access mode 3 (binary 11)
in flags to mean: check for read and write permission on the file and return a descriptor that can’t be used
for reading or writing. This non-standard access mode is used by some Linux drivers to return a descriptor
that is only to be used for device-specific ioctl(2) operations.
The (undefined) effect of O_RDONLY | O_TRUNC varies among implementations. On many systems the file is actu-
ally truncated.
There are many infelicities in the protocol underlying NFS, affecting amongst others O_SYNC and O_NDELAY.
POSIX provides for three different variants of synchronized I/O, corresponding to the flags O_SYNC, O_DSYNC and
O_RSYNC. Currently (2.1.130) these are all synonymous under Linux.
Note that open() can open device special files, but creat() cannot create them; use mknod(2) instead.
On NFS file systems with UID mapping enabled, open() may return a file descriptor but, for example, read(2)
requests are denied with EACCES. This is because the client performs open() by checking the permissions, but
UID mapping is performed by the server upon read and write requests.
If the file is newly created, its st_atime, st_ctime, st_mtime fields (respectively, time of last access, time
of last status change, and time of last modification; see stat(2)) are set to the current time, and so are the
st_ctime and st_mtime fields of the parent directory. Otherwise, if the file is modified because of the
O_TRUNC flag, its st_ctime and st_mtime fields are set to the current time.
O_DIRECT
The O_DIRECT flag may impose alignment restrictions on the length and address of userspace buffers and the file
offset of I/Os. In Linux alignment restrictions vary by file system and kernel version and might be absent
entirely. However there is currently no file system-independent interface for an application to discover these
restrictions for a given file or file system. Some file systems provide their own interfaces for doing so, for
example the XFS_IOC_DIOINFO operation in xfsctl(3).
Under Linux 2.4, transfer sizes, and the alignment of user buffer and file offset must all be multiples of the
logical block size of the file system. Under Linux 2.6, alignment to 512-byte boundaries suffices.
The O_DIRECT flag was introduced in SGI IRIX, where it has alignment restrictions similar to those of Linux
2.4. IRIX has also a fcntl(2) call to query appropriate alignments, and sizes. FreeBSD 4.x introduced a flag
of the same name, but without alignment restrictions.
O_DIRECT support was added under Linux in kernel version 2.4.10. Older Linux kernels simply ignore this flag.
Some file systems may not implement the flag and open() will fail with EINVAL if it is used.
Applications should avoid mixing O_DIRECT and normal I/O to the same file, and especially to overlapping byte
regions in the same file. Even when the file system correctly handles the coherency issues in this situation,
overall I/O throughput is likely to be slower than using either mode alone. Likewise, applications should
avoid mixing mmap(2) of files with direct I/O to the same files.
The behaviour of O_DIRECT with NFS will differ from local file systems. Older kernels, or kernels configured
in certain ways, may not support this combination. The NFS protocol does not support passing the flag to the
server, so O_DIRECT I/O will only bypass the page cache on the client; the server may still cache the I/O. The
client asks the server to make the I/O synchronous to preserve the synchronous semantics of O_DIRECT. Some
servers will perform poorly under these circumstances, especially if the I/O size is small. Some servers may
also be configured to lie to clients about the I/O having reached stable storage; this will avoid the perfor-
mance penalty at some risk to data integrity in the event of server power failure. The Linux NFS client places
no alignment restrictions on O_DIRECT I/O.
In summary, O_DIRECT is a potentially powerful tool that should be used with caution. It is recommended that
applications treat use of O_DIRECT as a performance option which is disabled by default.
"The thing that has always disturbed me about O_DIRECT is that the whole interface is just stupid, and
was probably designed by a deranged monkey on some serious mind-controlling substances." — Linus
BUGS
Currently, it is not possible to enable signal-driven I/O by specifying O_ASYNC when calling open(); use
fcntl(2) to enable this flag.
SEE ALSO
chmod(2), chown(2), close(2), dup(2), fcntl(2), link(2), lseek(2), mknod(2), mmap(2), mount(2), openat(2),
read(2), socket(2), stat(2), umask(2), unlink(2), write(2), fopen(3), feature_test_macros(7), fifo(7),
path_resolution(7), symlink(7)
COLOPHON
This page is part of release 3.09 of the Linux man-pages project. A description of the project, and informa-
tion about reporting documentation bugs, can be found at .
Linux 2008-08-21 OPEN(2)
==============================================================================
这个是open 的 man 文件，里面也没有提到O_RDWR的定义，但是在程序中确实看到了O_RDWR的身影，按么它是在哪里定义的呢？
我的ubuntu9.10下是/usr/include/bits/fcntl.h ，里面有
/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
located on an ext2 file system */
#define O_ACCMODE 0003
#define O_RDONLY 00
#define O_WRONLY 01
#define O_RDWR 02
#define O_CREAT 0100 /* not fcntl */
#define O_EXCL 0200 /* not fcntl */
#define O_NOCTTY 0400 /* not fcntl */
#define O_TRUNC 01000 /* not fcntl */
#define O_APPEND 02000
#define O_NONBLOCK 04000
#define O_NDELAY O_NONBLOCK
#define O_SYNC 010000
#define O_FSYNC O_SYNC
#define O_ASYNC 020000
#ifdef __USE_GNU
# define O_DIRECT 040000 /* Direct disk access. */
# define O_DIRECTORY 0200000 /* Must be a directory. */
# define O_NOFOLLOW 0400000 /* Do not follow links. */
# define O_NOATIME 01000000 /* Do not set atime. */
# define O_CLOEXEC 02000000 /* Set close_on_exec. */
#endif
