分类:
2011-12-01 23:42:43
原文地址:开源技术:负载均衡和冗余背备份实现 作者:dagun
LVS+Keepalived实现高可用集群 | |
来源: ChinaUnix博客 日期: 2009.07.21 14:49 (共有条评论) | |
操作系统平台:CentOS5.2 软件:LVS+keepalived LVS+Keepalived 介绍 LVS LVS是Linux Virtual Server的简写,意即Linux虚拟服务器,是一个虚拟的服务器集群系统。本项目在1998年5月由章文嵩博士成立,是中国国内最早出现的自由软件项目之一。目前有三种IP负载均衡技术(VS/NAT、VS/TUN和VS/DR); 十种调度算法(rrr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq)。 Keepalvied Keepalived在这里主要用作RealServer的健康状态检查以及LoadBalance主机和BackUP主机之间failover的实现 IP配置信息: 安装LVS和Keepalvied软件包 1. 下载相关软件包 #mkdir /usr/local/src/lvs #cd /usr/local/src/lvs #wget #wget 2. 安装LVS和Keepalived 四. 配置LVS实现负载均衡 1. LVS-DR,配置LVS脚本实现负载均衡 vi /usr/local/sbin/lvs-dr.sh #!/bin/bash # description: start LVS of DirectorServer #Written by :NetSeek GW=192.168.2.253 # website director vip. WEB_VIP=192.168.2.170 WEB_RIP1=192.168.2.171 WEB_RIP2=192.168.2.172 . /etc/rc.d/init.d/functions logger $0 called with $1 case "$1" in start) # Clear all iptables rules. /sbin/iptables -F # Reset iptables counters. /sbin/iptables -Z # Clear all ipvsadm rules/services. /sbin/ipvsadm -C #set lvs vip for dr /sbin/ipvsadm --set 30 5 60 /sbin/ifconfig eth0:0 $WEB_VIP broadcast $WEB_VIP netmask 255.255.255.255 up /sbin/route add -host $WEB_VIP dev eth0:0 /sbin/ipvsadm -A -t $WEB_VIP:80 -s wrr -p 3 /sbin/ipvsadm -a -t $WEB_VIP:80 -r $WEB_RIP1:80 -g -w 1 /sbin/ipvsadm -a -t $WEB_VIP:80 -r $WEB_RIP2:80 -g -w 1 touch /var/lock/subsys/ipvsadm >/dev/null 2>&1 # set Arp /sbin/arping -I eth0 -c 5 -s $WEB_VIP $GW >/dev/null 2>&1 ;; stop) /sbin/ipvsadm -C /sbin/ipvsadm -Z ifconfig eth0:0 down route del $WEB_VIP >/dev/null 2>&1 rm -rf /var/lock/subsys/ipvsadm >/dev/null 2>&1 /sbin/arping -I eth0 -c 5 -s $WEB_VIP $GW echo "ipvsadm stoped" ;; status) if [ ! -e /var/lock/subsys/ipvsadm ];then echo "ipvsadm is stoped" exit 1 else ipvsadm -ln echo "..........ipvsadm is OK." fi ;; *) echo "Usage: $0 {start|stop|status}" exit 1 esac exit 0 2. 配置Realserver脚本. #!/bin/bash # Written by NetSeek # description: Config realserver lo and apply noarp WEB_VIP=192.168.2.170 . /etc/rc.d/init.d/functions case "$1" in start) ifconfig lo:0 $WEB_VIP netmask 255.255.255.255 broadcast $WEB_VIP /sbin/route add -host $WEB_VIP dev lo:0 echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce sysctl -p >/dev/null 2>&1 echo "RealServer Start OK" ;; stop) ifconfig lo:0 down route del $WEB_VIP >/dev/null 2>&1 echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce echo "RealServer Stoped" ;; status) # Status of LVS-DR real server. islothere=`/sbin/ifconfig lo:0 | grep $WEB_VIP` isrothere=`netstat -rn | grep "lo:0" | grep $web_VIP` if [ ! "$islothere" -o ! "isrothere" ];then # Either the route or the lo:0 device # not found. echo "LVS-DR real server Stopped." else echo "LVS-DR Running." fi ;; *) # Invalid entry. echo "$0: Usage: $0 {start|status|stop}" exit 1 ;; esac exit 0 附上realserver机上的/etc/sysctl.conf: # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 1 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 net.ipv4.conf.lo.arp_ignore = 1 net.ipv4.conf.lo.arp_announce = 2 net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2 或者采用secondary ip address方式配置 # vi /etc/sysctl.conf 添加以下内容如上所示: net.ipv4.conf.lo.arp_ignore = 1 net.ipv4.conf.lo.arp_announce = 2 net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2 #sysctl –p #ip addr add 61.164.122.8/32 dev lo #ip add list 查看是否绑定 3. 启动lvs-dr脚本和realserver启本,在DR上可以查看LVS当前状态: #watch ipvsadm –ln 五.利用Keepalvied实现负载均衡和和高可用性 1.配置在主负载均衡服务器上配置keepalived.conf #vi /etc/keepalived/keepalived.conf (主调度器) ! Configuration File for keepalived global_defs { notification_email { } notification_email_from smtp_server 127.0.0.1 smtp_connect_timeout 30 router_id LVS_DEVEL } vrrp_instance VI_1 { state MASTER interface eth0 virtual_router_id 51 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.2.170 } } virtual_server 192.168.2.170 80 { delay_loop 6 lb_algo wrr lb_kind DR persistence_timeout 60 protocol TCP real_server 192.168.2.171 80 { weight 3 TCP_CHECK { connect_timeout 10 nb_get_retry 3 delay_before_retry 3 connect_port 80 } } real_server 192.168.2.172 80 { weight 3 TCP_CHECK { connect_timeout 10 nb_get_retry 3 delay_before_retry 3 connect_port 80 } } } 在备用调度器上: #vi /etc/keepalived/keepalived.conf (备用调度器) ! Configuration File for keepalived global_defs { notification_email { } notification_email_from smtp_server 127.0.0.1 smtp_connect_timeout 30 router_id LVS_DEVEL } vrrp_instance VI_1 { state BACKUP interface eth0 virtual_router_id 51 priority 99 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.2.170 } } virtual_server 192.168.2.170 80 { delay_loop 6 lb_algo wrr lb_kind DR persistence_timeout 60 protocol TCP real_server 192.168.2.171 80 { weight 3 TCP_CHECK { connect_timeout 10 nb_get_retry 3 delay_before_retry 3 connect_port 80 } } real_server 192.168.2.172 80 { weight 3 TCP_CHECK { connect_timeout 10 nb_get_retry 3 delay_before_retry 3 connect_port 80 } } } 2. BACKUP服务器同上配置,先安装lvs再按装keepalived,仍后配置/etc/keepalived/keepalived.conf,只需将红色标示的部分改一下即可. 3. vi /etc/rc.local #/usr/local/sbin/lvs-dr.sh 将lvs-dr.sh这个脚本注释掉。 #/usr/local/sbin/lvs-dr.sh stop 停止lvs-dr脚本 #/etc/init.d/keepalived start 启动keepalived 服务,keepalived就能利用keepalived.conf 配 置文件,实现负载均衡和高可用. 4. 查看lvs服务是否正常 #watch ipvsadm –ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddressort Scheduler Flags -> RemoteAddressort Forward Weight ActiveConn InActConn TCP 61.164.122.8:80 wrr persistent 60 -> 61.164.122.10:80 Route 3 0 0 -> 61.164.122.9:80 Route 3 0 0 复制代码 #tail –f /var/log/message 监听日志,查看状态,测试LVS负载均衡及高可用性是否有效。 5.停Master服务器的keepalived服务,查看BAKCUP服务器是否能正常接管服务。 四.相关参考 1.LVS 基础知识汇总 LVS的算法介绍 学习LVS的三种转发模式 LVS中的IP负载均衡技术 更多的请到 负载均衡版查看 Keepalived 相关参考资料。 http://www.keepalived.org/documentation.html 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u3/101514/showart_2002473.html |