分类： LINUX
2010-07-16 19:47:08
KLOGD(8) Linux System Administration KLOGD(8)NAME
klogd - Kernel Log DaemonSYNOPSIS
klogd [ -c n ] [ -d ] [ -f fname ] [ -iI ] [ -n ] [ -o ] [ -p ] [ -P path ] [ -s ] [ -k fname ] [ -v ] [ -x ] [ -2 ]DESCRIPTION
klogd is a system daemon which intercepts and logs Linux kernel mes- sages.OPTIONS
-c n Sets the default log level of console messages to n. -d Enable debugging mode. This will generate LOTS of output to stderr. -f file Log messages to the specified filename rather than to the syslog facility. -i -I Signal the currently executing klogd daemon. Both of these switches control the loading/reloading of symbol information. The -i switch signals the daemon to reload the kernel module symbols. The -I switch signals for a reload of both the static kernel symbols and the kernel module symbols. -n Avoid auto-backgrounding. This is needed especially if the klogd is started and controlled by init(8). -o Execute in 'one-shot' mode. This causes klogd to read and log all the messages that are found in the kernel message buffers. After a single read and log cycle the daemon exits. -p Enable paranoia. This option controls when klogd loads kernel module symbol information. Setting this switch causes klogd to load the kernel module symbol information whenever an Oops string is detected in the kernel message stream. -P path Use path instead of /proc/kmsg as the source of the kernel mes- sage. Specify "-" to read from standard input. This allows klogd to run entirely without root privileges. -s Force klogd to use the system call interface to the kernel mes- sage buffers. -k file Use the specified file as the source of kernel symbol informa- tion. -v Print version and exit. -x Omits EIP translation and therefore doesn't read the System.map file. -2 When symbols are expanded, print the line twice. Once with addresses converted to symbols, once with the raw text. This allows external programs such as ksymoops do their own processing on the original data.OVERVIEW
The functionality of klogd has been typically incorporated into other versions of syslogd but this seems to be a poor place for it. In the modern Linux kernel a number of kernel messaging issues such as sourc- ing, prioritization and resolution of kernel addresses must be addressed. Incorporating kernel logging into a separate process offers a cleaner separation of services. In Linux there are two potential sources of kernel log information: the /proc file system and the syscall (sys_syslog) interface, although ultimately they are one and the same. Klogd is designed to choose whichever source of information is the most appropriate. If the -P switch is used, klogd opens the specified path as the source of kernel log information. Otherwise klogd checks for the presence of a mounted /proc file system and if this is found the /proc/kmsg file is used as the source of kernel log information. If the proc file system is not mounted klogd uses a system call to obtain kernel messages. The com- mand line switch (-s) can be used to force klogd to use the system call interface as its messaging source. If kernel messages are directed through the syslogd daemon the klogd daemon, as of version 1.1, has the ability to properly prioritize ker- nel messages. Prioritization of the kernel messages was added to it at approximately version 0.99pl13 of the kernel. The raw kernel messages are of the form: <[0-7]>Something said by the kernel. The priority of the kernel message is encoded as a single numeric digit enclosed inside the <> pair. The definitions of these values is given in the kernel include file kernel.h. When a message is received from the kernel the klogd daemon reads this priority level and assigns the appropriate priority level to the syslog message. If file output (-f) is used the prioritization sequence is left pre-pended to the kernel message. The klogd daemon also allows the ability to alter the presentation of kernel messages to the system console. Consequent with the prioritiza- tion of kernel messages was the inclusion of default messaging levels for the kernel. In a stock kernel the the default console log level is set to 7. Any messages with a priority level numerically lower than 7 (higher priority) appear on the console. Messages of priority level 7 are considered to be 'debug' messages and will thus not appear on the console. Many administrators, particularly in a multi-user environment, prefer that all kernel messages be handled by klogd and either directed to a file or to the syslogd daemon. This prevents 'nuisance' messages such as line printer out of paper or disk change detected from cluttering the console. When -c is given on the commandline the klogd daemon will execute a system call to inhibit all kernel messages from being displayed on the console. Former versions always issued this system call and defaulted to all kernel messages except for panics. This is handled differently nowardays so klogd doesn't need to set this value anymore. The argu- ment given to the -c switch specifies the priority level of messages which will be directed to the console. Note that messages of a prior- ity value LOWER than the indicated number will be directed to the con- sole. For example, to have the kernel display all messages with a pri- ority level of 3 (KERN_ERR) or more severe the following command would be executed: klogd -c 4 The definitions of the numeric values for kernel messages are given in the file kernel.h which can be found in the /usr/include/linux direc- tory if the kernel sources are installed. These values parallel the syslog priority values which are defined in the file syslog.h found in the /usr/include/sys sub-directory. The klogd daemon can also be used in a 'one-shot' mode for reading the kernel message buffers. One shot mode is selected by specifying the -o switch on the command line. Output will be directed to either the sys- logd daemon or to an alternate file specified by the -f switch. For example, to read all the kernel messages after a system boot and record them in a file called krnl.msg the following command would be given. klogd -o -f ./krnl.msgKERNEL ADDRESS RESOLUTION
If the kernel detects an internal error condition a general protection fault will be triggered. As part of the GPF handling procedure the kernel prints out a status report indicating the state of the processor at the time of the fault. Included in this display are the contents of the microprocessor's registers, the contents of the kernel stack and a tracing of what functions were being executed at the time of the fault. This information is EXTREMELY IMPORTANT in determining what caused the internal error condition. The difficulty comes when a kernel developer attempts to analyze this information. The raw numeric information present in the protection fault printout is of very little use to the developers. This is due to the fact that kernels are not identical and the addresses of variable locations or functions will not be the same in all kernels. In order to correctly diagnose the cause of failure a kernel developer needs to know what specific kernel functions or vari- able locations were involved in the error. As part of the kernel compilation process a listing is created which specified the address locations of important variables and function in the kernel being compiled. This listing is saved in a file called Sys- tem.map in the top of the kernel directory source tree. Using this listing a kernel developer can determine exactly what the kernel was doing when the error condition occurred. The process of resolving the numeric addresses from the protection fault printout can be done manually or by using the ksymoops program which is included in the kernel sources. As a convenience klogd will attempt to resolve kernel numeric addresses to their symbolic forms if a kernel symbol table is available at execu- tion time. If you require the original address of the symbol, use the -2 switch to preserve the numeric address. A symbol table may be spec- ified by using the -k switch on the command line. If a symbol file is not explicitly specified the following filenames will be tried: /boot/System.map /System.map /usr/src/linux/System.map Version information is supplied in the system maps as of kernel 1.3.43. This version information is used to direct an intelligent search of the list of symbol tables. This feature is useful since it provides sup- port for both production and experimental kernels. For example a production kernel may have its map file stored in /boot/System.map. If an experimental or test kernel is compiled with the sources in the 'standard' location of /usr/src/linux the system map will be found in /usr/src/linux/System.map. When klogd starts under the experimental kernel the map in /boot/System.map will be bypassed in favor of the map in /usr/src/linux/System.map. Modern kernels as of 1.3.43 properly format important kernel addresses so that they will be recognized and translated by klogd. Earlier ker- nels require a source code patch be applied to the kernel sources. This patch is supplied with the sysklogd sources. The process of analyzing kernel protections faults works very well with a static kernel. Additional difficulties are encountered when attempt- ing to diagnose errors which occur in loadable kernel modules. Load- able kernel modules are used to implement kernel functionality in a form which can be loaded or unloaded at will. The use of loadable mod- ules is useful from a debugging standpoint and can also be useful in decreasing the amount of memory required by a kernel. The difficulty with diagnosing errors in loadable modules is due to the dynamic nature of the kernel modules. When a module is loaded the ker- nel will allocate memory to hold the module, when the module is unloaded this memory will be returned back to the kernel. This dynamic memory allocation makes it impossible to produce a map file which details the addresses of the variable and functions in a kernel load- able module. Without this location map it is not possible for a kernel developer to determine what went wrong if a protection fault involves a kernel module. klogd has support for dealing with the problem of diagnosing protection faults in kernel loadable modules. At program start time or in response to a signal the daemon will interrogate the kernel for a list- ing of all modules loaded and the addresses in memory they are loaded at. Individual modules can also register the locations of important functions when the module is loaded. The addresses of these exported symbols are also determined during this interrogation process. When a protection fault occurs an attempt will be made to resolve ker- nel addresses from the static symbol table. If this fails the symbols from the currently loaded modules are examined in an attempt to resolve the addresses. At the very minimum this allows klogd to indicate which loadable module was responsible for generating the protection fault. Additional information may be available if the module developer chose to export symbol information from the module. Proper and accurate resolution of addresses in kernel modules requires that klogd be informed whenever the kernel module status changes. The -i and -I switches can be used to signal the currently executing daemon that symbol information be reloaded. Of most importance to proper res- olution of module symbols is the -i switch. Each time a kernel module is loaded or removed from the kernel the following command should be executed: klogd -i The -p switch can also be used to insure that module symbol information is up to date. This switch instructs klogd to reload the module symbol information whenever a protection fault is detected. Caution should be used before invoking the program in 'paranoid' mode. The stability of the kernel and the operating environment is always under question when a protection fault occurs. Since the klogd daemon must execute system calls in order to read the module symbol information there is the pos- sibility that the system may be too unstable to capture useful informa- tion. A much better policy is to insure that klogd is updated whenever a module is loaded or unloaded. Having uptodate symbol information loaded increases the probability of properly resolving a protection fault if it should occur. Included in the sysklogd source distribution is a patch to the mod- ules-2.0.0 package which allows the insmod, rmmod and modprobe utili- ties to automatically signal klogd whenever a module is inserted or removed from the kernel. Using this patch will insure that the symbol information maintained in klogd is always consistent with the current kernel state.SIGNAL HANDLING
The klogd will respond to eight signals: SIGHUP, SIGINT, SIGKILL, SIGTERM, SIGTSTP, SIGUSR1, SIGUSR2 and SIGCONT. The SIGINT, SIGKILL, SIGTERM and SIGHUP signals will cause the daemon to close its kernel log sources and terminate gracefully. The SIGTSTP and SIGCONT signals are used to start and stop kernel log- ging. Upon receipt of a SIGTSTP signal the daemon will close its log sources and spin in an idle loop. Subsequent receipt of a SIGCONT sig- nal will cause the daemon to go through its initialization sequence and re-choose an input source. Using SIGSTOP and SIGCONT in combination the kernel log input can be re-chosen without stopping and restarting the daemon. For example if the /proc file system is to be un-mounted the following command sequence should be used: # kill -TSTP pid # umount /proc # kill -CONT pid Notations will be made in the system logs with LOG_INFO priority docu- menting the start/stop of logging. The SIGUSR1 and SIGUSR2 signals are used to initiate loading/reloading of kernel symbol information. Receipt of the SIGUSR1 signal will cause the kernel module symbols to be reloaded. Signaling the daemon with SIGUSR2 will cause both the static kernel symbols and the kernel module symbols to be reloaded. Provided that the System.map file is placed in an appropriate location the signal of generally greatest usefulness is the SIGUSR1 signal. This signal is designed to be used to signal the daemon when kernel modules are loaded/unloaded. Sending this signal to the daemon after a kernel module state change will insure that proper resolution of sym- bols will occur if a protection fault occurs in the address space occu- pied by a kernel module.FILES
/proc/kmsg One Source for kernel messages klogd /var/run/klogd.pid The file containing the process id of klogd /boot/System.map, /System.map, /usr/src/linux/System.map Default locations for kernel system maps.BUGS
Probably numerous. Well formed context diffs appreciated.AUTHOR
The klogd was originally written by Steve Lord (lord@cray.com), Greg Wettstein made major improvements. Dr. Greg Wettstein (greg@wind.enjellic.com) Enjellic Systems Development Oncology Research Divsion Computing Facility Roger Maris Cancer Center Fargo, ND 58122 Version 1.4 21 August, 1999 KLOGD(8)
转自：
