提高Oracle的查询统计速度方法简介

作者: db19851217 出处:　

 

阅读提示：本文介绍如何提高Oracle数据库的查询统计速度。大型数据库系统中往往要用到查询统计，但是对于数据量大的系统，用户在进行复杂的查询统计时往往感到速度很慢，不能满足应用要求，这就要求我们在设计数据库系统时进行合理设置，提高查询统计的速度。本文结合笔者的项目开发经验，阐述具体的设置方法。

以Oracle7.33数据库系统为例，我们在开发大型Oracle数据库系统时结合项目的特点，本着安全、高效的原则对数据库进行了一些物理设计，从而大大提高了数据库的查询统计速度。总结为如下几点：

1）扩大数据表空间到500MB，用于存放本系统的数据；
2）段盘区的初始大小为10KB，增长大小为10KB，增长幅度为1；
3）用户临时空间增大40MB；
4）系统临时表空间和回滚段表空间增大40MB，并且新建4个回滚段；
5）需要经常联结查询，而且数据量又大的库存表、名录表、收发料表放在一簇内；
6）提供定时备份，备份文件放在另外的机器上。

设置数据表空间的SQL语句如下：

CREATE TABLESPACE WXGL_DATA1 DATAFILE 'WXGL_DATA1.ORA' SIZE 500M ONLINE;

增加系统临时表空间和回滚段表空间的SQL语句如下：

ALTER TABLESPACE TEMPORARY_DATA ADD DATAFILE 'TMP2ORCL.ORA' SIZE 40M;
ALTER TABLESPACE ROLLBACK_DATA ADD DATAFILE 'RBS2ORCL.ORA' SIZE 40M;

将数据空间设置在指定的数据文件的SQL语句如下：

CREATE USER ZBGL IDENTIFIED BY ZBGL; 
GRANT DBA TO ZBGL; 
ALTER USER ZBGL DEFAULT TABLESPACE WXGL_DATA1 TEMPORARY TABLESPACE TEMPORARY_DATA;

设置五个回滚段的SQL语句如下：

SELECT SEGMENT_NAME FROM DBA_ROLLBACK_SEGS WHERE INITIAL_EXTENT < 512000 AND 
UPPPER(OWNER) = 'PUBLIC'; 
SELECT UPPER(STATUS) FROM DBA_ROLLBACK_SEGS WHERE UPPER(SEGMENT_NAME) = ''
ALTER ROLLBACK SEGMENT RB1 OFFLINE;
ALTER ROLLBACK SEGMENT RB2 OFFLINE; 
ALTER ROLLBACK SEGMENT RB3 OFFLINE;
ALTER ROLLBACK SEGMENT RB4 OFFLINE; 
ALTER ROLLBACK SEGMENT RB5 OFFLINE;
DROP ROLLBACK SEGMENT RB1;
DROP ROLLBACK SEGMENT RB2; 
DROP ROLLBACK SEGMENT RB3; 
DROP ROLLBACK SEGMENT RB4;
DROP ROLLBACK SEGMENT RB5;
CREATE PUBLIC ROLLBACK SEGMENT RB1 TABLESPACE ROLLBACK_DATA 
　 STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121);
CREATE PUBLIC ROLLBACK SEGMENT RB2 TABLESPACE ROLLBACK_DATA 
　 STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121);
CREATE PUBLIC ROLLBACK SEGMENT RB3 TABLESPACE ROLLBACK_DATA 
　 STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121); 
CREATE PUBLIC ROLLBACK SEGMENT RB4 TABLESPACE ROLLBACK_DATA
　 STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121); 
CREATE PUBLIC ROLLBACK SEGMENT RB5 TABLESPACE ROLLBACK_DATA
　 STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121); 
ALTER ROLLBACK SEGMENT RB1 ONLINE;
ALTER ROLLBACK SEGMENT RB2 ONLINE;
ALTER ROLLBACK SEGMENT RB3 ONLINE;
ALTER ROLLBACK SEGMENT RB4 ONLINE;
ALTER ROLLBACK SEGMENT RB5 ONLINE; 
COMMIT; 

将数据量大的库存表等放在一簇内的SQL语句如下：

KCB='CREATE TABLE QC_KCB( '
　 +' CKNM NUMBER(8) ,' 
　 +' QCNM NUMBER(10) ,'
　 +' CKKC NUMBER(12,2),'
　 +' SNCKKC NUMBER(12,2),'
　 +' LDJ NUMBER(12,2),' 
　 +' BZ VARCHAR(100),'
　 +' PRIMARY KEY(CKNM,QCNM))'
　 +' TABLESPACE WXGL_DATA1 ' ; （大数据量的库存表等放在WXGL_DATA1) 
QCFL = 'CREATE TABLE QC_QCFL ' 
　 + '(FLBH NUMBER(2) PRIMARY KEY,' 
　 + ' FLMC VARCHAR(20) '
　 + ' ) '
　 +' TABLESPACE WXGL_DATA2 ' ;(其他表放在WXGL_DATA2）

系统的基础数据库存表、名录表大约有数据80M；一个单位一般每年收发300次，收发料单大约有数据50M；系统冗余数据100M，系统辅助数据10M；因此，系统总共需要空间大约是240M，现在系统开辟数据空间500M，完全满足存储要求。由于系统使用了冗余数据，在查询常用数据时，避免了多表联结查询的情况，这样，虽然使用了更多的存储空间，但查询效率大幅度提高；同时，系统将需要经常联结查询的数据放在一簇，即将存放这些数据的空间在物理上相邻，这样也使查询速度大大提高。

另外在oracle7.33数据库的Database目录下有一个Initorcl.ora文件，改变其中的设置也可以提高查询统计速度。该文件的内容如下：

#
# $Header: init.ora 1.2 94/10/18 16:12:36 gdudey Osd 
$ init.ora Copyr (c) 1991 Oracle
# 
##########################################################
# Example INIT.ORA file 
# 
# This file is provided by Oracle Corporation to help you customize 
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
#
# Some parameter settings are generic to any size installation. 
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented 
# according to installation size. 
# 
# Use the following table to approximate the SGA size needed for the 
# three scenarious provided in this file:
#
# 　-------Installation/Database Size------
#　 SMALL MEDIUM LARGE 
# Block 2K 4500K 6800K 17000K 
# Size　4K 5500K 8800K 21000K 
# 
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments, 
# these must be specified in different files, but since all gc_* 
# parameters must be the same on all instances, they should be in one file.
# 
# INSTRUCTIONS: Edit this file and the other INIT files it calls for 
# your site, either by using the values provided here or by providing 
# your own. Then place an IFILE= line into each instance-specific 
# INIT file that points at this file.
################################################################# 
db_name = oracle 
db_files = 20 
control_files = C:\ORAWIN95\DATABASE\ctl1orcl.ora 
compatible = 7.3.0.0.0 
db_file_multiblock_read_count = 8   # INITIAL
# db_file_multiblock_read_count = 8 　 # SMALL
# db_file_multiblock_read_count = 16　 # MEDIUM
# db_file_multiblock_read_count = 32 　 # LARGE 
db_block_buffers = 200　# INITIAL
# db_block_buffers = 200# SMALL
# db_block_buffers = 550 　 # MEDIUM 
# db_block_buffers = 3200 　# LARGE 
shared_pool_size = 3500000 # INITIAL
# shared_pool_size = 3500000　 # SMALL 
# shared_pool_size = 6000000　 # MEDIUM
# shared_pool_size = 9000000　 # LARGE 
log_checkpoint_interval = 10000
processes = 50 # INITIAL 
# processes = 50　 # SMALL 
# processes = 100 # MEDIUM 
# processes = 200 # LARGE 
dml_locks = 100 　# INITIAL
# dml_locks = 100 # SMALL 
# dml_locks = 200 # MEDIUM 
# dml_locks = 500 # LARGE
log_buffer = 8192 # INITIAL
# log_buffer = 8192　 # SMALL
# log_buffer = 32768　# MEDIUM 
# log_buffer = 163840 # LARGE
sequence_cache_entries = 10　 # INITIAL
# sequence_cache_entries = 10 # SMALL 
# sequence_cache_entries = 30 # MEDIUM
# sequence_cache_entries = 100# LARGE
sequence_cache_hash_buckets = 10　 # INITIAL
# sequence_cache_hash_buckets = 10 # SMALL
# sequence_cache_hash_buckets = 23 # MEDIUM
# sequence_cache_hash_buckets = 89 # LARGE
# audit_trail = true 　# if you want auditing
# timed_statistics = true　# if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
# log_archive_start = true # if you want automatic archiving
log_archive_dest=%ORACLE_HOME%\DATABASE\ARCHIVE
# define directories to store trace and alert files 
background_dump_dest=%RDBMS73%\trace
user_dump_dest=%RDBMS73%\trace
db_block_size = 2048 
snapshot_refresh_processes = 1 
remote_login_passwordfile = shared 

可以修改该文件的db_file_multiblock_read_count，db_block_buffers，shared_pool_size，processes ，log_buffer，sequence_cache_entries，sequence_cache_hash_buckets等项（文件中均有提示），根据需要和系统使用的数据库服务器的特点适当改大数值，可以提高查询统计速度。这里要注意的是，必须将 log_archive_start = true 项改为False，设置才能生效。

本文介绍的Oracle数据库设置方法均在用户实际使用中经过了严格测试，证明是有效和实用的。