|
作者:sco 出处:uw714doc.sco.com
|
|
Configuring a sound card
If you want to install a sound card after installing UnixWare 7 and the LKP, you need to do the following to enable Linux application to use it. Sound card configuration is performed entirely on the Unix side; only the configuration of Linux applications to use the card is done from the LKP side.
- Install the sound card in your system using scoadmin audio from a UNIX shell or desktop.
- Download the Open Sound System (OSS) from (They provide a free evaluation copy, but charge for a permanent license.)
Select the UnixWare 7 version of the OSS and follow their installation instructions. Note the device node under /dev used by the audio card.
- Verify that the sound card is working on UnixWare 7 in UNIX mode using OSS.
- Determine the major node of the UnixWare 7 audio device node:
ls -l /dev/audio-device
Do this from a Unix shell: you need the major number of the UnixWare 7 device node, not the Linux device node.
In the output of ls, the major and minor numbers are listed in the column before the date, separated by a comma; as in the following example, where 29 is the major number: crw-rw-rw- 1 bin bin 29, 0 Apr 7 1998 audio
- Change directory to /linux/lxinst/dev.
cd /linux/lxinst/dev
- Copy the following script into a file name mkaudio.sh in the current directory:
#!/bin/sh
umask 111
rm audio
rm audio0
rm audio1
rm audio2
rm audio3
rm audio4
rm dmfm0
rm dsp
rm dsp0
rm dsp1
rm dsp2
rm dsp4
rm dspW0
rm dspW1
rm midi00
rm midi01
rm midi02
rm midi03
rm midi04
rm mixer0
rm mixer1
rm mixer2
rm mixer3
rm mixer4
rm music
rm sequencer
rm sndstat
mknod audio c $1 4
mknod audio0 c $1 4
mknod audio1 c $1 20
mknod audio2 c $1 36
mknod audio3 c $1 52
mknod audio4 c $1 68
mknod dmfm0 c $1 7
mknod dsp c $1 3
mknod dsp0 c $1 3
mknod dsp1 c $1 19
mknod dsp2 c $1 35
mknod dsp4 c $1 67
mknod dspW0 c $1 5
mknod dspW1 c $1 21
mknod midi00 c $1 2
mknod midi01 c $1 18
mknod midi02 c $1 34
mknod midi03 c $1 50
mknod midi04 c $1 66
mknod mixer0 c $1 0
mknod mixer1 c $1 16
mknod mixer2 c $1 32
mknod mixer3 c $1 48
mknod mixer4 c $1 64
mknod music c $1 8
mknod sequencer c $1 1
mknod sndstat c $1 6
- Run the script as follows, using the major number of the UnixWare 7 audio device obtained previously:
sh ./mkaudio.sh major#
- You should now be able to configure a Linux application under LKP to use the audio card you just installed.
| |
阅读(450) | 评论(0) | 转发(0) |