ARM9远程视频监控uvc-streame+viewer.exe测试

本文的copyright归[e-mail] 所有，使用GPL发布，可以自由拷贝，转载。但转载请保持文档的完整性，注明原作者及原链接，严禁用于任何商业用途。
作者：[e-mail]
博客：yuweixian4230.blog.chinaunix.net 

ARM9远程视频监控uvc-streame+viewer.exe测试 USB摄像头


1.先插上 USB摄像头，然后启动

VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 196K
gspca: probing 0ac8:301b
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe sensor -> 0011
zc3xx: Find Sensor HV7131R(c)
gspca: video0 created


Try to bring eth0 interface up ...

2.使用 uvc_stream 可执行程序  放置在 /lib/下

[root@yuweixian /]# uvc_stream --help  查看帮助
------------------------------------------------------------------
Usage: uvc_stream
 [-h | --help ]........: display this help
 [-d | --device ]......: video device to open (your camera)
 [-r | --resolution ]..: 960x720, 640x480, 320x240, 160x120
 [-f | --fps ].........: frames per second
 [-p | --port ]........: TCP-port for the server
 [-c | --control_port ]: TCP-port for the motor control server
 [-v | --version ].....: display version information
 [-b | --background]...: fork to the background, daemon mode
 --disable_control.....: disable the motor control server
------------------------------------------------------------------

3.命令

[root@yuweixian /]# uvc_stream
Using V4L2 device.....: /dev/video0
Resolution............: 640 x 480    默认分辨率
frames per second.....: 5
TCP port..............: 8080
motor control TCP port: 8081
zc3xx: probe 2wr ov vga 0x0000

4. window上 viewer.exe 显示