UBOOT-2010.06 移植 支持 下载 tftp下载菜单 （十）

参考资料：

u-boot-2011.03在TQ2440上的移植(9)--TFTP下载菜单制作

1、在common文件夹下添加tftp_menu.c, 内容如下：

#include
#include

static char awaitkey(unsigned long delay, int* error_p)
{
 int i;
 char c;
 if (delay == -1)
 {
  while (1)
  {
   if (tstc()) /* we got a key press */
   return getc();
  }
 }
 else
 {       
  for (i = 0; i < delay; i++)
  {
   if (tstc()) /* we got a key press */
   return getc();
   udelay (10*1000);
  }
 }
 if (error_p)
 *error_p = -1;
 
 return 0;
}

void main_menu_usage(void)
{
 printf("\r\n---u-boot-tftp-menu---\r\n");
 printf("[1] u-boot.bin --> Nand Flash\r\n");
 printf("[2] Linux(uImage) --> Nand Flash\r\n");
 printf("[3] yaffs2 --> Nand Flash\r\n");
 printf("[4] Linux(uImage) --> Ram & Run\r\n");
 printf("[5] System Restart\r\n");
 printf("[q] quite menu\r\n");
}

void menu_shell(void)
{
 char c;
 char cmd_buf[200];

 while (1)
 {
  main_menu_usage();
  c = awaitkey(-1, NULL);
  printf("%c\n", c);
  switch (c)
  {
   case '1':
   {
    strcpy(cmd_buf, "tftp 0x32000000 u-boot.bin; nand erase 0x0 0x40000; nand write 0x32000000 0x0 0x40000");
    run_command(cmd_buf, 0);
    break;
   }
   case '2':
   {
    strcpy(cmd_buf, "tftp 0x32000000 uImage; nand erase 0x200000 0x500000; nand write 0x32000000 0x200000 0x400000");
    run_command(cmd_buf, 0);
    break;
   }
   case '3':
   {
    strcpy(cmd_buf, "tftp 0x32000000 fs.yaffs2; nand erase 0x400000; nand write.yaffs2 0x32000000 0x400000 $(filesize)");
    run_command(cmd_buf, 0);
    break;
   }
   case '4':
   {
    strcpy(cmd_buf, "tftp 0x32000000 uImage; bootm 0x32000000");
    run_command(cmd_buf, 0);
    break;
   }
   case '5':
   {
    strcpy(cmd_buf, "reset");
    run_command(cmd_buf, 0);
    break;
   }
   case 'q':
   {
    return;   
    break;
   }
  }
 }
}

int do_menu (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
    menu_shell();
    return 0;
}

U_BOOT_CMD(
 tftp_menu, 1, 0, do_menu,
 "Download Menu",
 "U-boot Download Menu by Hotips\n"
);

2、修改common下同目录cmd_menu.c的Makefile文件

vi common/Makefile 添加如下一行

COBJS-y += tftp_menu.o

3、make后下载到板子Nandflash 地址0处

启动uboot进入控制台后，输入命令tftp_menu进入菜单如下

U-Boot 2010.06-rc1 ( 4鏈?17 2011 - 19:58:55)

DRAM:  64 MiB
Flash: 2 MiB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   dm9000
[SMDK2440]# setenv serverip 192.168.1.7
[SMDK2440]# setenv gatewayip 192.168.1.2
[SMDK2440]# saveenv
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x4000000000002 --   0% complete.
Writing to Nand... done
[SMDK2440]# tftp
[SMDK2440]# ping 192.168.1.7
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 10:23:45:67:89:ab
operating at unknown: 0 mode
Using dm9000 device
host 192.168.1.7 is alive
[SMDK2440]# tftp_menu

---u-boot-tftp-menu---
[1] u-boot.bin --> Nand Flash
[2] Linux(uImage) --> Nand Flash
[3] yaffs2 --> Nand Flash
[4] Linux(uImage) --> Ram & Run
[5] System Restart
[q] quite menu

4、TFTP工具的使用

Tftpd32可以从网址：下载，解压后运行如下图：

 

Current Directory 为存放要下载的image的目录

Server interface 为电脑即服务器的ip地址

点击Show Dir如果看见存放在Current Directory路径，证明Tftp已经可用。