2014年(84)
分类: LINUX
2014-05-05 15:00:40
原文地址:[转载]Linux时钟中断(一) 作者:niutao.linux
This page has links to information about the (relatively) new timer systems for the Linux kernel. The current linux kernel received a major enhancement to it's timer system (as of about 2.6.21), which solved a number of problems.
A good article on the subject is at at lwn.net:
The original kernel timer system (called the "timer wheel) was based on incrementing a kernel-internal value (jiffies) every timer interrupt. The timer interrupt becomes the default scheduling quamtum, and all other timers are based on jiffies. The timer interrupt rate (and jiffy increment rate) is defined by a compile-time constant called HZ. Different platforms use different values for HZ. Historically, the kernel used 100 as the value for HZ, yielding a jiffy interval of 10 ms. With 2.4, the HZ value for i386 was changed to 1000, yeilding a jiffy interval of 1 ms. Recently (2.6.13) the kernel changed HZ for i386 to 250. (1000 was deemed too high).
Ingo Molnar did an in-depth explanation about the performance of the current "timer wheel" implementation of timers. This was part of a series of messages trying to justify the addition of ktimers (which have different characteristics).
It is possibly the best explanation of the timer wheel avaiable: See and
A bunch of material in this section needs to be created or expanded to take into account the new ktimer system by Thomas Gleixner.
There are two /proc files that are very useful for
/proc/timer_list has information about the currently configured clocks and timers on the system. This is useful for debugging the current status of the timer system (especially while you are developing clockevent and clocksource support for your platform.)
You can tell if high resolution is configured for you machine by looking at a few different things:
For standard resolution (at jiffy resolution), a clock will have a value for it's '.resolution' field equal to the period of a jiffy. For embedded machines, where HZ is typically 100, this will be 10 milliseconds, or 10000000 (ten million) nanoseconds.
Also for standard resolution, the Clock Event Device will have an event handler of "tick_handle_periodic".
For high resolution, the resolution of the clock will be listed as 1 nanosecond (which is ridiculous, but serves as an indicator of essentially arbitrary precision.) Also, the Clock Event Device will have an event handler of "hrtimer_interrupt".
[need more info here - and this should probably be written up and put in Documentation/filesystems/proc.txt]
/proc/timer_stats is a file in the /proc psuedo file system which allows you to see information about the routines that are requesting timers of the Linux kernel. By cat'ing this file, you can see which routines are using lots of timers, and how frequently they are requesting them. This can be of interest to see
To use /proc/timer_stats, configure the kernel with support for the feature. That is, set CONFIG_TIMER_STATS=y in your .config. This is on the Kernel Hacking menu, with the prompt: "Collect kernel timers statistics"
Compile and install your kernel, and reboot your machine.
To activate the collection of stats (and reset the counters), do "echo 1 >/proc/timer_stats"
To stop collecting stats, do "echo 0 >/proc/timer_stats"
You can dump the statistics either while the collection system is running or stopped. To dump the stats, use 'cat /proc/timer_stats'. This shows the average events/sec at the end as well so you get a rough idea of system activity.
/proc/timer_stats fields (for version 0.1 of the format) are:
, ( )
The configuration option is: CONFIG_NO_HZ
Prompt is: Tickless System (Dynamic Ticks), on the Kernel Features configuration menu.
How to tell if dynamic ticks is supported on your kernel:
You can look at the timer interrupts and compare to jiffies:
cat /proc/interrupts | grep -i time
sleep 10
cat /proc/interrupts | grep -i time
You can use powertop on embedded processors, but in order to get a clean display
from it, you need an ncurses lib with wide-char support. (From Kevin Hilman, Oct 2007)
Here's a poor-man's version of powertop:
- do_gettimeofday
See , which describe sub-jiffy timers.
See
This systems replaces jiffies and xtime with tocks (arch-dependent), mtime (monotonic time) and wtime (wall time), and proposes a strategy for migrating to that.
In 2005, John Stultz proposed changes to the timers to use a 64-bit nanosecond value as the base. He did a presentation and BOF at OLS 2005. (It should be available online)
There was a very long thread about timers, jiffies, and related subjects in July of 2005 on the kernel mailing list.
The title was: "Re: [PATCH] i386: Selectable Frequency of the Timer Interrupt"
Linus said jiffies is not going away
- still need 32-bit counter, shouldn't be real-time value (too much overhead to calculate)
- high-res timers shouldn't be sub-HZ, but instead, HZ should be high and timer tick should not be 1:1 with HZ
- in other words, have HZ be high (like 2K), have the timer interrupt fire off at some lower frequency,
and increment jiffies by more than one on each interrupt.
- rationale for this is to keep a single sub-system
Arjan had good points about coalescing low-res timers
- 3 use cases:
- low res timeouts
- high res timer for periodic absolute wakeup (wake up every 10 ms, whether last one was late or nt
- high res timer for periodic relative wakeup (wake up 10 ms from now)