TANGO15 boot loader v0.12.19 for generic2/unnamed board
(C) Copyright 2002-2005 Sigma Designs, Inc
NOTE: this boot loader is designed to boot kernels made with the
2.4.xx releases of the Sigma Designs ARMutils package
Built at Sep 6 2006 21:55:46
Loaded to 0x90060000
Found boot configuration
Booted from parallel flash.
CPU freq.: 202 MHz
DRAM size is 128MB (128MB/0MB)
DRAM0 Params (0xf63001f8/0x00072243)
Loading vsync parameters ..
ROMFS found at 0x46020000, Volume name = mambo
File vsyncparam.bin found
Copying image from 0x461FF310 to 0x90001000, size = 12840
Loading bitmaps ..
ROMFS found at 0x46020000, Volume name = mambo
File bitmap.bin found
Copying image from 0x4616EC40 to 0x90090000, size = 9080
Verify checksum from 0x90090000, size 9080 (0x2378).
Copying RAWD section to 0x17ff9db4, from 0x9009000c, size 2376 (0x948)
Copying RAWD section to 0x00079000, from 0x90090960, size 64 (0x40)
Decompressing RLED section to 0x17ffa2fc, from 0x900909ac, size 6593 (0x19c1)
RLED section has width 216
RLED section is of type 0
Decompressed size of RLED section is 0x00005904
Loading/Installing IRQ handler ..
ROMFS found at 0x46020000, Volume name = mambo
File irqhandler.bin found
Copying image from 0x461763A0 to 0x90011000, size = 150440
Verify checksum from 0x90011000, size 150440 (0x24ba8).
Initializing IRQ handler @ 0x90030ab8.
ROMFS found at 0x46020000, Volume name = mambo
File linux.bin.gz found
Unzipping image from 0x460B0860 to 0x90090000, size = 779186
Inptr = 0x00000014(20)
Inflating....
<987> Outcnt = 0x001a6c80(1731712)
Final Inptr = 0x000be3aa(779178)
Original CRC = 0x8bb28291
Computed CRC = 0x8bb28291
Boot kernel at 0x90090000 with ROMFS at 0x46010000
Linux version 2.4.22-em86xx-uc0-sigma () (gcc version 2.95.3 20
010315 (release)) #27 Sat Apr 12 10:48:38 CST 2008
Found bootloader memory map at 0x10000fc0.
Processor: ARM pt110 revision 0
Architecture: EM86XX
Tango15 Rev B (kernel supports Rev A)
Board name is generic2
On node 0 totalpages: 18176
Free page pool initialized (size=512)
zone(0): 18176 pages.
Warning: wrong zone alignment (0x90080000, 0x0000000c, 0x00001000)
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/blkmem/0
leeyapn: CONFIG_ARCH_TANGO15_REV < 1<6>leeyapn: Disable all interrupts initially
.Console: colour dummy device 80x30
serial_em86xx: setup_console @ 38400
Calibrating delay loop... 100.76 BogoMIPS
Memory: 71MB = 71MB total
Memory: 69972KB available (1531K code, 257K data, 76K init)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers disabled
PCI: Configured EM86XX as a PCI slave with 128MB PCI memory
PCI: Each Region size is 16384KB
PCI: Reserved memory from 0x10080000 to 0x14780000 for DMA and mapped to 0x12000
000
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
skbmem: allocated 0x200000 from 0x94180000-0x94380000
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ()
devfs: boot_options: 0x1
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
pty: 256 Unix98 ptys configured
fip: driver loaded (buffer_size = 2)
ir: driver loaded (wait_period = 20, s_lBuffer_size = 60)
Relocate blkmem to address 46020000
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 46020000-462027FF [VIRTUAL 46020000-462027FF] (RO)
SCSI subsystem driver Revision: 1.00
Probing EM86XX Flash Memory
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
Using word write method
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 4 MTD partitions on "EM86XX mapped flash":
0x00020000-0x00240000 : "RootFS"
0x00240000-0x00600000 : "User"
0x00000000-0x00010000 : "BootROM1"
0x00010000-0x00020000 : "BootROM2"
mtd: partition "BootROM2" doesn't start on an erase block boundary -- force read
-only
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:02.2: PCI device 1106:3104
ehci_hcd 00:02.2: irq 15, pci mem 60100100
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
host/usb-uhci.c: $Revision: 1.275 $ time 10:50:15 Apr 12 2008
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: USB UHCI at I/O 0x58000400, IRQ 15
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: USB UHCI at I/O 0x58000420, IRQ 15
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 35392
JFFS: Trying to mount a non-mtd device.
VFS: Mounted root (romfs filesystem) readonly.
Mounted devfs on /dev
Freeing init memory: 76K
hub.c: new USB device 00:02.2-1, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Multi Model: Flash Reader Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Initializing ramdisk... Attached scsi removable disk sda at scsi0, channel 0, id
0, lun 0
ok
Initializing random number generator... done.
Using /lib/modules/2.4.22-em86xx-uc0-sigma/kernel/drivers/net/mii.o
Using /lib/modules/2.4.22-em86xx-uc0-sigma/kernel/drivers/net/8139too.o
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0x58000000, 00:10:16:50:b8:20, IRQ 14
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
SCSI device sda: 2014992 512-byte hdwr sectors (1032 MB)
sda: Write Protect is off
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1
阅读(1651) | 评论(2) | 转发(0) |
