EFI Boot Manager ver 2.00 [14.62] Loading device drivers
EFI Boot Manager ver 2.00 [14.62] Please select a boot option OS might use only the primary console set via boot manager or conconfig command Hot Key: l
(C) Copyright 1999-2009 Hewlett-Packard Development Company, L.P. All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.039
Press Any Key to interrupt Autoboot \EFI\HPUX\AUTO ==> boot vmunix -lq Seconds left till autoboot - 10 37mHPUX> [Z;1;1;120;120;1;0x Unrecognized command.
HPUX> hpux -lm > System Memory = 196346 MB loading section 0 ....................................................................... (complete) loading section 1 ............. (complete) loading symbol table loading System Directory (boot.sys) to MFS ..... loading MFSFILES directory (bootfs) to MFS Could not open d
Console is on Serial Device - via PCDP Booting kernel...
Stored message buffer up to system crash:
MFS is defined: base= 0xe00000010205e000 size= 1420 KB krs_find_files: The config.krs file was not found. krs_find_files: The config.krs.lkg file was not found. Loaded ACPI revision 2.0 tables. MMIO on this platform supports Write Coaleig.krs file was not found. krs_find_files: The config.krs.lkg file was not found. kc_init: Error getting number of static modu static modules list
System Console is on the Built-In Serial Interface AF_INET socket/streams output daemon running, pid 89 afinet_prelink: module installed Starting the STREAMS daemons-phase 1 LVM: Warning: Booting on LVM disk without BDRA LVM: Run vgcfgrestore to restore LVM configuration to your boot disk Swap device table: (start & size given in 512-byte blocks) n root device; ignored - can't open device WARNING: No swap device configured, so dump cannot be defaulted to primary swap. WARNING: No dump devices are configured. Dump is disabled. mountformation: 0:(hfs) 6 10:(dnlc_neg_fs) 251
Message buffer contents after system crash:
panic: VFS_MOUNTROOT: READ_ONLY: all VFS_MOUNTROOTs failed: NEED IP Function Name 0xe000000002043520 0xe051e0 End of Stack Trace
linkstamp: Sat Apr 17 18:20:24 SST 2010 _release_version: @(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf Calling function e0000000017effa0 for Shutdown State 1 type 0x2 i 0 pfn 0x1 pages 0x3ffe9 i 1 pfn 0x100000 pages 0x2ef0000 i 2 pfn 0x4040000 pages 0xbf99e i 3 pfn 0x40ffa80 pages 0x166
*** A system crash has occurred. (See the above messages for details.) *** The system is now preparink, for use *** in debugging the crash.
ERROR: No dump space is configured. Physical memory will not be dumped. ERROR: Configured dump space is insufficient to hold dump metadata. Physical memory will not be dumped.
问题分析及解决。
--------------------------
1. 试图进入单用户，和维护模式，都失败了。按理说no_dump space 应该不至于启动不了系统，安腾进入单用户模式和HP9000应该是不一样的。HP9000用hpux -is /lm 安腾boot -is /lm
HPUX> boot /stand/backup Boot path is now: /stand/backup/vmunix > System Memory = 196346 MB loading section 0 ....................................................................... (complete) loading section 1 ............. (complete) loading symbol table loading System Directory (boot.sys) to MFS ..... loading MFSFILES directory (/stand/backup/bootfs) to MFS ............................ Launching /stand/backup/vmunix SIZE: Text:35992K + Data:6365K + BSS:26770K = Total:69128K
Console is on Serial Device - via PCDP Booting kernel...
Loaded ACPI revision 2.0 tables. Using /stand/ext_ioconfig
Memory Class Setup ------------------------------------------------------------------------- Class Physmem Lockmem Swapmem ------------------------------------------------------------------------- System : 186759 MB 186759 MB 186759 MB Kernel : 186759 MB 186759 MB 186759 MB User : 180859 MB 160335 MB 160964 MB -------------------------------------------------------------------------
ktracer is off until requested. Enabling spinlock ALAT switching Installing Socket Protocol families AF_INET and AF_INET6 Kernel EVM initialized sec_init(): kernel RPC authentication/security initialization. secgss_init(): kernel RPCSEC_GSS security initialization. rpc_init(): kernel RPC initialization. rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install) NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 10. NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 11. NOTICE: cachefsc_install: cachefs File system was registered at index 13. fclp0: Claiming Fibre Channel HBA port at hardware path 0/0/6/0/0/0/0 fclp1: Claiming Fibre Channel HBA port at hardware path 0/0/14/0/0/0/0 fclp3: Claiming Fibre Channel HBA port at hardware path 1/0/6/0/0/0/0 Boot device's HP-UX HW path is: 0.0.0.3.0.6.0 igelan0: INITIALIZING HP PCI-X 1000Base-T Built-in at hardware path 0/0/0/1/0 iether2: INITIALIZING HP AD337-60001 PCIe 1000Base-T Dual-port Adapter at hardware path 0/0/12/0/0/0/0 iether3: INITIALIZING HP AD337-60001 PCIe 1000Base-T Dual-port Adapter at hardware path 0/0/12/0/0/0/1
System Console is on the Built-In Serial Interface iether4: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware path 1/0/8/1/0 iether5: INITIALIZING HP AD337-60001 PCIe 1000Base-T Dual-port Adapter at hardware path 1/0/12/0/0/0/0 iether6: INITIALIZING HP AD337-60001 PCIe 1000Base-T Dual-port Adapter at hardware path 1/0/12/0/0/0/1 iether1: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware path 0/0/8/1/0 AF_INET socket/streams output daemon running, pid 105 afinet_prelink: module installed Starting the STREAMS daemons-phase 1 LVM: Root VG activated Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x2; start = 0, size = 268435456 Checking root file system. log replay in progress replay complete - marking super-block as CLEAN Root check done. Create STCP device files Starting the STREAMS daemons-phase 2 $Revision: vmunix: B.11.31_LR FLAVOR=perf Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 201059252 Kbytes, lockable: 151335100 Kbytes, available: 172359816 Kbytes
/sbin/ioinitrc: /dev/vg00/lvol1: UNREF FILE I=10 OWNER=root MODE=120755 /dev/vg00/lvol1: SIZE=7 MTIME=Sep 7 13:14 2012 (CLEARED) /dev/vg00/lvol1: UNREF FILE I=11 OWNER=root MODE=120755 /dev/vg00/lvol1: SIZE=14 MTIME=Sep 7 13:12 2012 (CLEARED) /dev/vg00/lvol1: UNREF FILE I=18 OWNER=root MODE=120755 /dev/vg00/lvol1: SIZE=15 MTIME=Sep 7 13:12 2012 (CLEARED) /dev/vg00/lvol1: UNREF FILE I=6402 OWNER=root MODE=100644 /dev/vg00/lvol1: SIZE=153104 MTIME=Sep 7 13:15 2012 (RECONNECTED) /dev/vg00/lvol1: LINK COUNT FILE I=6403 OWNER=root MODE=100644 /dev/vg00/lvol1: SIZE=153104 MTIME=Dec 3 11:13 2012 COUNT 2 SHOULD BE 1 (ADJUSTED) /dev/vg00/lvol1: FREE INODE COUNT WRONG IN SUPERBLK (FIXED) /dev/vg00/lvol1: 160 DUP BLKS IN BIT MAPS /dev/vg00/lvol1: BAD CYLINDER GROUPS (FIXED) /dev/vg00/lvol1: 237 files, 0 icont, 166981 used, 1884572 free (1036 frags, 235442 blocks) /sbin/krs_sysinit: * The automatic 'backup' configuration has been loaded and is now in use. * The module 'rng' has been loaded. en loaded.
insf: Installing special files for ipmi instance 0 address 0/250/1
/sbin/bcheckrc: Checking for LVM volume groups and Activating (if any exist) Checking hfs file systems /sbin/fsclean: /dev/vg00/lvol1 (mounted) ok HFS file systems are OK, not running fsck Checking vxfs file systems UX:vxfs fsck: INFO: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write) UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 needs che3-20916: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 needs checking UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 needs checking UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 needs checking UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol8:sanity check: /dev/vg00/lvol8 needs checking UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lv_ora:sanity check: /dev/vg00/lv_ora needs checking UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvcv:sanity check: /dev/vg00/lvcv needs checking /dev/vg00/lvol4:log replay in progress /dev/vg00/lvol4:replay complete - marking super-block as CLEAN /dev/vg00/lvol5:log replay in progress /dev/vg00/lvol5:replay complete - marking super-block as CLEAN /dev/vg00/lvol6:log replay in progress /dev/vg00/lvol6:replay complete - marking super-block as CLEAN ogress /dev/vg00/lvol7:replay complete - marking super-block as CLEAN /dev/vg00/lvol8:log replay in progress /dev/vg00/lvol8:replay complete - marking super-block as CLEAN /dev/vg00/lv_ora:log replay in progress /dev/vg00/lv_ora:replay complete - marking super-block as CLEAN /dev/vg00/lvcv:log replay in progress /dev/vg00/lvcv:replay complete - marking super-block as CLEAN
Cleaning /etc/ptmp... (c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California (c)Copyright 1980, 1984, 1986 Novell, Inc. (c)Copyright 1986-2000 Sun Microsystems, Inc. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology (c)Copyright 1989-199 Inc. (c)Copyright 1990 Motorola, Inc. (c)Copyright 1990, 1991, 1992 Cornell University (c)Copyright 1989-1991 The University of Maryland (c)Copyright 1988 Carnegie Mellon University (c)Copyright 1991-2006 Mentat Inc. (c)Copyright 1996 Morning Star Technologies, Inc. (c)Copyright 1996 Progressive Systems, Inc.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
is disabled (see /etc/auto_parms.log)
HP-UX Start-up in progres__
Configure system crash dumps ................................ OK Removing old vxvm files ..................................... OK Mount file systems .......................................... OK Remounting Root File System ................................. OK Setting hostname ............................................ OK Start containment subsystem configuration ................... OK Set privilege group ......................................... OK Display date ................................................ N/A Save system crash dump if needed ............................ FAIL * Start evp ................................................... OK Enable auxiliary swap space ................................. OK Start syncer daemon ......................................... OK Initializing livedump ....................................... N/A
