hosted-engine自承载引擎添加附加主机

首先启动第一台hosted-engine
[root@ovirthost18 ~]# hosted-engine --vm-start

50d9d728-9bcf-4ab6-a278-c5a454a32f2c
        Status = WaitForLaunch
        nicModel = rtl8139,pv
        statusTime = 4305117770
        emulatedMachine = pc
        pid = 0
        vmName = HostedEngine
        devices = [{'index': '2', 'iface': 'ide', 'specParams': {}, 'readonly': 'true', 'deviceId': '5a88fbe5-3e06-4d7b-bf92-107fd04671b5', 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': '1', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID': '0d00f1eb-6830-444e-96d0-6c0df99d7faf', 'imageID': '4af8861b-92b6-45c0-9761-d04f04c8f183', 'specParams': {}, 'readonly': 'false', 'domainID': 'c585e108-8832-489e-bad1-01bc9476e1e8', 'optional': 'false', 'deviceId': '4af8861b-92b6-45c0-9761-d04f04c8f183', 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model': 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr': '00:16:3e:3b:7c:1a', 'linkActive': 'true', 'network': 'ovirtmgmt', 'filter': 'vdsm-no-mac-spoofing', 'specParams': {}, 'deviceId': 'a173df1e-2bb7-487c-885a-02b03ba3a46e', 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId': 'b4086d8b-d69f-46e6-8fbb-4ab04b3a1708', 'alias': 'console0'}]
        guestDiskMapping = {}
        vmType = kvm
        clientIp =
        displaySecurePort = -1
        memSize = 16384
        displayPort = -1
        cpuType = Nehalem
        spiceSecureChannels = smain,sdisplay,sinputs,scursor,splayback,srecord,ssmartcard,susbredir
        smp = 4
        displayIp = 0
        display = vnc
[root@ovirthost18 ~]# hosted-engine --vm-status


--== Host 1 status ==--

Status up-to-date                  : True
Hostname                           : ovirthost18.skyovirt.com
Host ID                            : 1
Engine status                      : {"health": "good", "vm": "up", "detail": "up"}
Score                              : 0
stopped                            : False
Local maintenance                  : True
crc32                              : fe880da9
Host timestamp                     : 10511
在另一台主机上执行:
[root@ovirthost17 ~]# screen hosted-engine --deploy

[root@ovirthost17 ~]# screen hosted-engine --deploy
[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
          Continuing will configure this host for serving as hypervisor and create a VM where you have to install the engine afterwards.
          Are you sure you want to continue? (Yes, No)[Yes]:

[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
          Continuing will configure this host for serving as hypervisor and create a VM where you have to install the engine afterwards.
          Are you sure you want to continue? (Yes, No)[Yes]:
          Configuration files: []
          Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160311183220-et0uiy.log
          Version: otopi-1.4.1 (otopi-1.4.1-1.el7.centos)
[ INFO ] Hardware supports virtualization
[ INFO ] Bridge ovirtmgmt already created
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization

          --== STORAGE CONFIGURATION ==--

          During customization use CTRL-D to abort.
          Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs
[ INFO ] Please note that Replica 3 support is required for the shared storage.
          Please specify the full shared storage connection path to use (example: host:/path): 192.168.184.17:/GO
[ INFO ] GlusterFS replica 3 Volume detected
          The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]?
[ INFO ] Installing on additional host
          Please specify the Host ID [Must be integer, default: 2]:

          --== SYSTEM CONFIGURATION ==--

[WARNING] A configuration file must be supplied to deploy Hosted Engine on an additional host.
          The answer file may be fetched from an active HE host using scp.
          If you do not want to download it automatically you can abort the setup answering no to the following question.
          Do you want to scp the answer file from another HE host? (Yes, No)[Yes]:
          Please provide the FQDN or IP of an active HE host: ovirthost18.skyovirt.com
          Enter 'root' user password for host ovirthost18.skyovirt.com:
[ INFO ] Answer file successfully downloaded

          --== NETWORK CONFIGURATION ==--

          iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: NO
          The following CPU types are supported by this host:
                 - model_Nehalem: Intel Nehalem Family
                 - model_Penryn: Intel Penryn Family
                 - model_Conroe: Intel Conroe Family

          --== HOSTED ENGINE CONFIGURATION ==--

          Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_2]: ovirthost17.skyovirt.com
          Enter 'admin@internal' user password that will be used for accessing the Administrator Portal:
          Confirm 'admin@internal' user password:
[ INFO ] Stage: Setup validation

          --== CONFIGURATION PREVIEW ==--

          Engine FQDN : ovirt.skyovirt.com
          Bridge name : ovirtmgmt
          Host address : ovirthost17.skyovirt.com
          SSH daemon port : 22
          Gateway address : 192.168.184.1
          Host name for web application : ovirthost17.skyovirt.com
          Host ID : 2
          Image size GB : 10
          GlusterFS Share Name : hosted_engine_glusterfs
          GlusterFS Brick Provisioning : False
          Storage connection : 192.168.184.18:/GO
          Console type : vnc
          Memory size MB : 16384
          MAC address : 00:16:3e:3b:7c:1a
          Boot type : disk
          Number of CPUs : 4
          Restart engine VM after engine-setup: True
          CPU Type : model_Nehalem
[ INFO ] Stage: Transaction setup
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Configuring libvirt
[ INFO ] Configuring VDSM
[ INFO ] Starting vdsmd
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Configuring VM
[ INFO ] Updating hosted-engine configuration
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
[ INFO ] Acquiring internal CA cert from the engine
[ INFO ] The following CA certificate is going to be used, please immediately interrupt if not correct:
[ INFO ] Issuer: C=US, O=skyovirt.com, CN=ovirt.skyovirt.com.69415, Subject: C=US, O=skyovirt.com, CN=ovirt.skyovirt.com.69415, Fingerprint (SHA-1): AECA33331DEC34A847A1B7BCAB02D8C2F3678770
[ INFO ] Connecting to the Engine
[ INFO ] Waiting for the host to become operational in the engine. This may take several minutes...
[ INFO ] The VDSM Host is now operational
[ INFO ] Enabling and starting HA services
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160311183850.conf'
[ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ INFO ] Hosted Engine successfully set up
[screen is terminating]