法1：
# 使用lspci -v
.........
01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at ec00 [size=256]
Memory at ff8ffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
01:0c.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
Subsystem: Dell Optiplex GX260
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at ff8c0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at e8c0 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Kernel driver in use: e1000
Kernel modules: e1000
或者
# 使用ethtool -i ethx
[root@localhost ~]# ethtool -i eth0
driver: 8139too
version: 0.9.28
firmware-version:
bus-info: 0000:01:07.0
[root@localhost ~]# ethtool -i eth1
driver: e1000
version: 7.3.20-k2-NAPI
firmware-version: N/A
bus-info: 0000:01:0c.0
[root@localhost ~]#
阅读(2237) | 评论(0) | 转发(0) |
