安装好数据库和客户端后, 端用lsnrctl start启动监听程序, 在客户端用net config 配置,连接数据库, 最后生成tnsnames.ora文件, 格式如下(这是管理两个节点的配置).
#C:\oracle\ora92\NETWORK\ADMIN\tnsnames.ora
servicename =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.120.1.70)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = test)
)
)
TEST_2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.120.1.71)(PORT = 1526))
)
(CONNECT_DATA =
(SERVICE_NAME = myora)
)
)
可以用tnsping servicename来连接然后sqlplus username/passwd@servicename 连接
常见问题:
<> ORA-12537: TNS: 连接已关闭
A:监听程序没有启动, 运行lsnrctl start命令
<>ORA-12545: 因目标主机或对象不存在,连接失败
A: 检查tnsnames.ora文件配置, 主机名和端口是否正确, 监听程序是否启动.
<>ORA-12560: TNS:protocol adapter error
A: 检查tnsnames.ora文件配置,主机名和端口是否正确, 监听程序是否启动. SID是否正确,可以用tnsping 检测
<>ORA-03113 :通信通道的文件结束
A:这个原因的问题很多, 一般应检查网络状况, 或者系统参数的配置
具体见:
<> select 查询时,有2000条记录符合条件,如何先取出符合条件前1000条,然后再取出符合条件的后1000条?
A:
select * from table_name where rownum<=1000;
select * from table_name where rownum<=2000 minus select * from table_name where rownum<=1000;
select * from table_name where rownum<=3000 minus select * from table_name where rownum<=2000;
<>怎样能够查到数据库的名字?
A: select value from v$parameter where upper(name) like '%DB_NAME%'
<>怎样得到一个表的最后更新时间?
A: 1. 打开审计功能, 设置初始化文件: AUDIT_TRAIL = true
2. 重新启动instance.
3. 审计表:
AUDIT INSERT,SELECT,DELETE,UPDATE on TableName by ACCESS WHENEVER SUCCESSFUL
4. 得到详细信息:
SELECT OBJ_NAME,ACTION_NAME ,to_char(timestamp,'dd/mm/yyyy , HH:MM:SS') from sys.dba_audit_object.
<>察看表空间都有哪些表
A; select table_name from dba_tables where tablespace_name='xxx';
<> 一个不常见的错误:
$ sqlplus
exec(): 0509-036 Cannot load program sqlplus because of the following errors:
0509-130 Symbol resolution failed for sqlplus because:
0509-136 Symbol pw_post (number 272) is not exported from dependent module /unix.
0509-136 Symbol pw_wait (number 273) is not exported from dependent module /unix.
0509-136 Symbol pw_config (number 274) is not exported from dependent module /unix.
0509-136 Symbol aix_ora_pw_version3_required (number 275) is not exported from dependent module /unix.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
A: 重新 /etc/loadext -l /etc/pw-syscall (reload)
可能是 Kernel Extension for aix 在重启动的时候没 load
SQLPLUS的AutoTrace是分析SQL的执行计划,执行效率的一个非常简单方便的工具,在绝大多数情况下,也是非常有用的工具。
这里,我们试图归纳一些常见的问题,并进行一定的分析。
1。如何设置和使用AUTOTRACE
SQL> connect / as sysdba
SQL> @?/rdbms/admin/utlxplan.sql
Table created.
SQL> create public synonym plan_table for plan_table;
Synonym created.
SQL> grant select,update,insert,delete on plan_table to public;
Grant succeeded.
SQL> @?/sqlplus/admin/plustrce.sql
SQL>grant plustrace to public.
2. 理解和使用AutoTrace
对于SQL 调整,使用Autotrace是最简单的方法了,我们只需要做:
SQL>SET AUTOTRACE ON
我们就可以看到我们SQL的执行计划,执行成本(PHYSICAL READ/CONSISTENT READ...)
加上SET Timing On或者Set Time On,我们可以得到很多我们需要的数据。
SQL> select nvl(title,' ') from punishinfo_cs where ci_id=45672 ;
NVL(TITLE,'')
--------------------------------------------------
阎王令
Elapsed: 00:00:00.00
SQL> set autotrace on
SQL> /
NVL(TITLE,'')
--------------------------------------------------
阎王令
Elapsed: 00:00:00.71
Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=2 Card=1 Bytes=32)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'PUNISHINFO_CS' (Cost=2 C
ard=1 Bytes=32)
2 1 INDEX (UNIQUE SCAN) OF 'SYS_C001084' (UNIQUE) (Cost=1 Ca
rd=1)
Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
3 consistent gets
0 physical reads
0 redo size
376 bytes sent via SQL*Net to client
425 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
3.关于使用Autotrace的一些常见疑问:
a.比如我上面的例子,我不用Autotrace,我的时间小于0.01S,但是用了Autotrace,我的执行时间变成了0.71S.
不注意的人往往会认为,或者没有不用Autotrace时候的情况,往往会忽视这个数字,认为时间就是0.71S.
实际上,这个0.7S,是花在Autotrace里面的时间。由于Autotrace需要记录你的SQL执行的成本,这个本身是往数据库里面读取和写入一定的数据的,需要一定的时间。当你的SQL执行时间足够短的时候,这个由于Autotrace带来的时间就变成非常可观的了。我们就需要通过不用Autotrace的时间,和使用Autotrace的执行成本来结合比较。
我们通过结合Autotrace和Tkprof/SQLTRACE,很容易知道,AUtotrace就近作了什么:
select nvl(title,' ') from punishinfo_cs where ci_id=45672 call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.00 0.01 0 0 0 0 Execute 1 0.00 0.00 0 0 0 0 Fetch 2 0.00 0.00 0 3 0 1 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 4 0.00 0.01 0 3 0 1 DELETE FROM PLAN_TABLE WHERE STATEMENT_ID=:1 EXPLAIN PLAN SET STATEMENT_ID='PLUS185025' FOR select nvl(title,' ') from punishinfo_cs where ci_id=45672 insert into plan_table (statement_id, timestamp, operation, options, object_node, object_owner, object_name, object_instance, object_type, search_columns, id, parent_id, position, other,optimizer, cost, cardinality, bytes, other_tag, partition_start, partition_stop, partition_id, distribution ) values (:1,SYSDATE,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18,:19, :20,:21,:22) SELECT ID ID_PLUS_EXP,PARENT_ID PARENT_ID_PLUS_EXP,LPAD(' ',2*(LEVEL-1)) ||OPERATION||DECODE(OTHER_TAG,NULL,'','*')||DECODE(OPTIONS,NULL,'',' ('||OPTIONS||')')||DECODE(OBJECT_NAME,NULL,'',' OF '''||OBJECT_NAME||'''') ||DECODE(OBJECT_TYPE,NULL,'',' ('||OBJECT_TYPE||')')||DECODE(ID,0, DECODE(OPTIMIZER,NULL,'',' Optimizer='||OPTIMIZER))||DECODE(COST,NULL,'',' (Cost='||COST||DECODE(CARDINALITY,NULL,'',' Card='||CARDINALITY) ||DECODE(BYTES,NULL,'',' Bytes='||BYTES)||')') PLAN_PLUS_EXP,OBJECT_NODE OBJECT_NODE_PLUS_EXP FROM PLAN_TABLE START WITH ID=0 AND STATEMENT_ID=:1 CONNECT BY PRIOR ID=PARENT_ID AND STATEMENT_ID=:1 ORDER BY ID,POSITION SELECT ID ID_PLUS_EXP,OTHER_TAG OTHER_TAG_PLUS_EXP,OTHER OTHER_PLUS_EXP FROM PLAN_TABLE WHERE STATEMENT_ID=:1 AND OTHER_TAG IS NOT NULL ORDER BY ID
我们看到,由于我们的Autotrace,简简单单的一句话,实际上oracle
【责编:admin】
--------------------next---------------------