 |
| 文件: |
lwysuccess.rar |
| 大小: |
204KB |
| 下载: |
下载 | |
第一步：配置串口属性：(见上传文件)
在终端以root身份输入命令:minicom
根据提示，选择O选项，进行相应的配置：
接着他会出现一个配置菜单选项，如下：
Filenames and paths
File transfer protocols
Serial port setup
Modem and dialing
Screen and keyboard
Save setup as dfl
Save setup as..
Exit
Exit from Minicom
选择Serial port setup之后会弹出串口配置菜单选项，如下：
A - Serial Device : /dev/ttyS1
B - Lockfile Location : /var/lock
C - Callin Program :
D - Callout Program :
E - Bps/Par/Bits : 38400 8N1
F - Hardware Flow Control : Yes
G - Software Flow Control : No
Change which setting?
按下A把ttyS1改成ttyS0，选择串口COM1，假如您采用其他的自己相应配置。按下E，选择Bps/Par/Bits为115200 8N1，我觉得一般的研发板都要这么配置吧。然后再按下F把Yes改成No之后退出。
退出前的结果应该是下面这样子的：
A - Serial Device : /dev/ttyS0
B - Lockfile Location : /var/lock
C - Callin Program :
D - Callout Program :
E - Bps/Par/Bits : 115200 8N1
F - Hardware Flow Control : No
G - Software Flow Control : No
Change which setting?
退出后选择如下的Save setup as dfl保存成默认的读取配置文档即可。
Filenames and paths
File transfer protocols
Serial port setup
Modem and dialing
Screen and keyboard
Save setup as dfl
Save setup as..
Exit
Exit from Minicom
第二步：选择Modem and dialing
然后Modem and dailing下面的A和B的字符删掉
Save as dfl，退出，再重进
阅读(883) | 评论(0) | 转发(0) |
