cisco 4006 help!!!
大家侃侃这样是什么问题？
该怎么解决，我对cisco不熟。
ROMMON: Entered init
ROMMON: Cold Reset frame @0x00000000
ROMMON: Reading reset reason register
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
ROMMON: Exiting init
Catalyst-4232 platform with 65536 Kbytes of main memory
loadprog: bad file magic number: 0x0
open: failed to find and/or load the bootloader: "bootflash:running-config"
loadprog: error - on file open
boot: cannot load "cisco2-Catalyst-4232"
ROMMON: Entered init
ROMMON: Warm Reset frame @0x00000000
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
ROMMON: Exiting init
Catalyst-4232 platform with 65536 Kbytes of main memory
loadprog: bad file magic number: 0x0
boot: cannot load "bootflash:"
ROMMON: Entered init
ROMMON: Warm Reset frame @0x00000000
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
ROMMON: Exiting init
Catalyst-4232 platform with 65536 Kbytes of main memory
loadprog: bad file magic number: 0x0
boot: cannot load "bootflash:"
ROMMON: Entered init
ROMMON: Warm Reset frame @0x00000000
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
ROMMON: Exiting init
Catalyst-4232 platform with 65536 Kbytes of main memory
rommon 1 >
loadprog: bad file magic number: 0x0
open: failed to find and/or load the bootloader: "bootflash:running-config"
loadprog: error - on file open
boot: cannot load "cisco2-Catalyst-4232"
看起来象FLASH中的IOS坏了。
但再看看，好象你在配置文件中错误的输入了BOOT SYSTEM CISCO2-CATALYST-4232一句
我找到问题所在了，我现在说说我的操作。我先将reg改为0x2142 reset 然后copy start run,然后改了reg为0x2102，但是没有保存就reload了（我到现在还是不明白我的bootldr怎么会改成了bootflash:running-config，有可能是在这里出现的问题）。在reload以后就找不到ios的，因为在上面的提示可以看到，他在启动的时候是load flash里面的cisco2-Catalyst-4232，但是我的ios根本就不是这个名字。所以up不起来。 在这时，我在rommon 1 >下面想看看flash里面的东西，主要是ios。我就在rommon 1 >下面运行 dir bootflash,还有 dir flash 和dir boot flash 结果他都说错的设备名，后来实在没办法问了一个cisco的技术支持工程师才知道在要用 dir bootflash: 后面要加:号的。。。（555 到了这里我才发现在这方面自己真是知道地很少，很多东西都停留在理论上，很不爽。）。然后在运行boot bootflash:xxxx.bin 才把系统up起来。。。。。。。。。 然后该了reg和bootldr 保存&reboot 搞定。
【责编:admin】
--------------------next---------------------
阅读(398) | 评论(0) | 转发(0) |
