You want to upgrade 150 computers from wks4 to 2000 pro. You create a unattent.txt file by using setup manager. You copy the file to a floppy disk. You then start the installation on a test computer by using the windows 2000 professional CD-ROM. You insert the floppy disk after the computer starts. Although you had set the user interaction level to full unattended mode, you are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input. What should you do?
A. Add a {data} section to aunattenD.txt, and set the unattended install Parameter to YES.
B. Add an {Un-attend} section to unattenD.txt, and set the OEMP reinstall parameter to Yes.
C. Rename unattend.txt on the floppy disk to winnt.sif***
D. Create a \$oem$\$1 folder on the hard disk of the test computer, and copy unattenD.txt to the folder.
Also got a drag and drop.You are the administrator of your company network. A user named Peter runs 2000 Professional on his portable computer. Peter wants to be able to work at home on files that were created in the office on the company network. Prior to logging off the network and leaving the office, Peter enables Offline Files.Peter calls you from home and reports that copies of his folders and files on the network are not
available on his portable computer. What should you instruct Peter to do?
A. Enable file and print sharing, Peter will be able to access his files at home
immediately
B. Synchronize all offline files, Peter will be able to access his files at home
immediately
C. At the office, make all files available offline, Peter will be able to access his files the next time he logs off the network
D. At the Office, create a shortcut to the Offline Files folder, Peter will be able to access his files the next time he logs off the network
Answer: C
5. You are the administrator of your company's network. The software department is preparing to rewrite an accounting application so that it will run on 2000 Professional computers. All of the computers in the software department currently use Windows 98.You want to configure the computers in the software department so that users can use bothWindows 98 and Windows 2000 Professional during the project. You also want to ensure that thecomputers are configures for optimal disk performance. In addition, you want to ensure that users in the software department can access all of the files on their computers while using either operating system. What should you do?
A. Create and format a FAT32 Partition
B. Create and format an NTFS volume
C. Configure Windows 2000 Professional to enable disk compression
D. Configure Windows 2000 Professional to implement dynamic volumes
Answer: A
8. You upgrade six MPS-compliant computers from Windows NT Workstation 4 0 to Windows 2000 Professional. Each computer has two 550 MHz processors. The computers are used for high end graphics applications that require exceptional performance After the upgrade users report that the processing time for the graphics applications is much slower. What should you do?
A. use Device Manager to enable the AGP Bridge Controller
B. use Device Manager to install the MPS-compliant drivers for the second processor
C. use Device Manager to install the ACPI-compliant drivers for the second processor
D. During startup, press F8, and install the MPS-compliant drivers for the second
processor
Answer: B.
9. You install Windows 2000 Professional on 10 computers that have video capture cards Installed. A user named Lilly reports that her video capture card is not functioning correctly. She wants to use her video capturing software to capture video frames but she cannot view the video output You use Device Manager to view the hardware settings on Lilly a computer as shown in the exhibit(Click the Exhibit button)You want Lilly to be able to capture video frames by using the video capture card. What should you
do?
A. use System in Control Panel to enable the device
B. use Device Manager to update the drivers for the device
C. Move the video capture card to a different PCI slot
D. Uninstall the device and disable Plug and Play detection for the device
Answer: B
10. You install Windows 2000 Professional on your Portable computer. You use a docking station for your Portable computer when you are in the office
You install an ISA-based SCSI adapter in your docking station. You Insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter. What should you do?
A. Restart the Add/Remove Hardware wizard Manually add the SCSI adapter drivers
B. Restart the computer in safe mode Restart the Add/Remove Hardware wizard to detect the SCSI adapter
C. Configure Windows 2000 Professional to use driver signing Restart the Add/Remove Hardware wizard to detect the SCSI adapter
D. Copy the SCSI adapter drivers to the Winnt\Driver Cache\i386 folder Restart the Add/Remove Hardware wizard to detect the SCSI adapter
Answer: A
11. You are the administrator of a Windows 2000 network. The network is configured as shown in the exhibit (Click the Exhibit button)
Computers on the Sales subnet run Windows 2000 Professional. These computers are dynamically assigned IP addressing and configuration information from a DHCP server on the subnet.Computers on the Development subnet run Windows 98. These computers are statically assigned IP addressing and configuration information.users on the Sales subnet report that they cannot communicate with users on the Development subnet A user who works on Computer3 reports that he cannot communicate with computers on
either subnet. You want all users to be able to communicate with other users on both subnets.What should you do? (Choose two)
A. Change the frame type to 802.2 on Computer3
B. Change the default gateway option IP address on the DHCP server
C. Change the default protocol on the computers on the Sales subnet to NWLink
IPX/SPX/NETBIOS Compatible Transport Protocol
D. Enable TCP/IP protocol with the default settings on Computer3
E. Add the NETBEUI protocol to the binding order on all client computers
Answer: B,D
You install Windows 2000 Professional on your portable computer. Your computer has a built in10MB Ethernet adapter. You then install a 100 MB Ethernet PC Card adapter.When the installation is complete, you notice that the 100MB Ethernet PC Card adapter is not functioning. You use Computer Management to view the network adapters in your computer.Device Manager shows that the 10 MB Ethernet adapter and the 100 MB Ethernet PC Card adapter are conflicting with each otherYou want to configure Windows 2000 Professional to USB only the 100 MB Ethernet PC Card
adapter. What should you do?
A. Remove the 10 MB Ethernet adapter driver by using Device Manager
B. Remove the drivers for both Ethernet adapters by using Device Manager
C. Install the 100 MB Ethernet adapter in a different PC Card slot
D. Disable the device for the 10 MB Ethernet adapter by using Device Manager
Answer: D
1
【责编:admin】
--------------------next---------------------
