be available in coil
Stainless Wire Limited is about to commission a state of the art German manufactured profile
happy rolling mill supplied to the factory by FUHR GmbH.
The company will be able to offer shaped stainless steel and non ferrous wire with a cross section area of 2.00mm square to 45mm square.
Maximum width 15.00mm and minimum thickness 0.50mm cold rolled from
happy inlet wire diameters of 1.50mm to 9.00mm. The wire will be available in coil form to begin with.
阅读(233) | 评论(0) | 转发(0) |
