********************************************
Please input Space to run Linux
Please input ESC to run UBOOT
Please input . to run burn-in
Otherwise, system will run Linux after 1 sec
*********************************************
Jump 0x10240000
Uncompressing Linux........................................................................................................................................................................................................................................ done, booting the kernel.
Linux version 2.6.14 () (gcc version 3.4.4) #872 Thu May 6 19:41:32 CST 2010
CPU: FA626TEid(wb) [66056261] revision 1 (ARMv5TE)
Machine: Faraday GM8181
Memory policy: ECC disabled, Data cache writeback
GM8181 clock: PLL1OUT at 480 MHz, PLL2OUT at 750 MHz, PLL3OUT at 648 MHz
CPU0: D VIPT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists
Kernel command line: mem=128M console=uart,shift,2,io,0xF9830000,38400 initcall_debug user_debug=31
PID hash table entries: 512 (order: 9, 8192 bytes)
GM Clock: CPU = 480 MHz, AHBCLK = 240 MHz
FTTMR010 timer 0 installed on IRQ 14, with clock 120000000 at 1000 HZ.
IC: GM8182(D)
Console: colour dummy device 80x30
Early serial console at I/O port 0xf9830000 (options '38400', shift 2)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 122368KB available (2524K code, 498K data, 4384K init)
Calibrating delay loop... 477.18 BogoMIPS (lpj=238592)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
GM AHB DMA Driver Init Ok
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Video Timer Max 35000ms 0xfa56ea00 ticks
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Serial: 8250/16550 driver $Revision: 1.7 $ 4 ports, IRQ sharing disabled
UART pin mux set for UART1
UART pin mux set for UART2
UART pin mux set for UART3
ttyS0 at I/O 0xf9830000 (irq = 9) is a 16550A
ttyS1 at I/O 0xf9840000 (irq = 10) is a 16550A
ttyS2 at I/O 0xf9850000 (irq = 20) is a 16550A
ttyS3 at I/O 0xf9880000 (irq = 21) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler old registered
RAMDISK driver initialized: 2 RAM disks of 24576K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Linux video capture interface: v1.00
GM SATAPHY clock source : SATA0==XTAL, SATA1==SATA0
GM SATAPHY Clock = 30 MHz
GM SATA0 PHY tx amplitude adjust, val=0x3a
GM SATA1 PHY tx amplitude adjust, val=0x3a
FTSATA100 driver version 0.07
GM SATA limit highest allowable speed to 1.5 Gbps
FTSATA100(FTSATA100) AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x1 impl
FTSATA100(FTSATA100) cap flags: ncq stag pm led clo only pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xF92D0100 ctl 0x0 bmdma 0x0 irq 43
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 ATA-8, max UDMA/133, 156299375 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : FTSATA100
Vendor: ATA Model: Hitachi HTS54258 Rev: BBBO
Type: Direct-Access ANSI SCSI revision: 05
GM SATA limit highest allowable speed to 1.5 Gbps
ftsata100_host_init: no device detected
FTSATA100(FTSATA100) AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x1 impl
FTSATA100(FTSATA100) cap flags: ncq stag pm led clo only pmp pio slum part
ata2: SATA max UDMA/133 cmd 0xF92E0100 ctl 0x0 bmdma 0x0 irq 44
ata2: SATA link down (SStatus 0)
scsi1 : FTSATA100
SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Flash device: SIZE 0x1000000 at ADDR 0x10000000
Flash is 8 bit mode
MTD: Init GM flash device: (size=16MB) start at address=0xf3000000
GM flash device: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
GM flash device: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "GM flash device":
0x00240000-0x01000000 : "Linux"
mtd: partition "Linux" extends beyond the end of device "GM flash device" -- size truncated to 0x5c0000
0x00100000-0x00200000 : "User"
0x00000000-0x00100000 : "Boot"
MTD flash device initialized
block2mtd: version $Revision: 1.1.1.1 $
GM USB 2.0 OTG Controller ...
FOTG2XX_DRV fotg2xx_dev: GM EHCI Host Controller
FOTG2XX_DRV fotg2xx_dev: new USB bus registered, assigned bus number 1
FOTG2XX_DRV fotg2xx_dev: irq 4, io mem 0xf9220000
FOTG2XX_DRV fotg2xx_dev: park 0
FOTG2XX_DRV fotg2xx_dev: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
FOTG200 UDC Initialization
GM USB 2.0 Host Controller ...
FUSBH200_DRV fusbh200_dev: GM EHCI Host Controller
FUSBH200_DRV fusbh200_dev: new USB bus registered, assigned bus number 2
FUSBH200_DRV fusbh200_dev: irq 5, io mem 0xf9230000
FUSBH200_DRV fusbh200_dev: park 0
FUSBH200_DRV fusbh200_dev: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usb 1-1: new low speed USB device using FOTG2XX_DRV and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-FOTG2XX_PSU_PCI-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09 2005 UTC).
ALSA device list:
No soundcards found.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Adding console on ttyS0 at I/O port 0xf9830000 (options '38400')
Freeing init memory: 4384K
Mounting root fs rw ...
mount: cannot read /proc/mounts: No such file or directory
Mounting other filesystems ...
Sysinit done
Has MTD at flash
I2C_GM_ADAP_Version(0.1) driver enable!
kecurrent Clock div i:0x93
rcurrent TGSR:0x827
nei2c-algo-GM: hw routines for GM I2C adapter registered.
l.i2c-core.o: adapter GM I2C adapter registered
msi2c_iic_add_bus in i2c-GM-adap.c successfully!
gmi2c-dev: adapter [GM I2C adapter] registered as minor 0
nii2c_add_driver successfully!
=GM i2c algorithm module version(0.3) enable successfully!
128
tw2865: module license 'GM License' taints kernel.
TW2865 gets divisor 23, main clock = 27000000
FTWDT101 Watchdog Timer: timer margin 2000000 sec
ct656: [ver:0.1.2] INIT OK!
insmod: cannot insert '/lib/modules/ftsdc010.ko': unknown symbol ift-32ssp: common[ver:0.3.4] INIT OK!
n module, or unknown parameter
SSP0 gets divisor 7, SSP clock = 81000000
SSP0 gets divisor 7, SSP clock = 81000000
ft-32ssp: SoundCard(0) attached OK (c4dd05d0)
TW2865 audio init complete, sample rate is 8k.
TW2865: I2S probe ok in Slave mode.
Frammap: DDR1: memory base = 0x8000000, memory size = 0x8000000
Frammap: fail to open /mnt/mtd/config_8181, /tmp/template_8181 is created.
Frammap: version 0.2.6, system memory alignment = 0x40000 bytes
VideoGraph v0.31g
You may use
#echo 11 > /proc/videograph/dbg
to enable debug mode (0xbf0406c0)
Debug message at 0xc8856000 start pointer 0xbf04957c
----v.01--- init video type detect
v0.1 vtd_open
vtd_close !!!!
argc 1
first read output type is vga
outtype is vga
hw: 0 ch: 0 fac: 5 tv: 5 upgrade_flag: 6 rom_len: 221336 logo cnt: 7 default lang: 0
sys_display_type = 5
GM_ffb: [ver:0.1.14]INIT flcd200 OK.
LCD: Output resolution is 1024x768/60HZ.
LCD: Input resolution is 1024x768(XVGA)
init_fscaler0
Warning, scaler clock already be turn on
Scaler0 IRQ mode(12) v1.1
The Driver Max Resolution is 720x576
hw: 0 ch: 0 fac: 5 tv: 5 upgrade_flag: 6 rom_len: 221336 logo cnt: 7 default lang: 0
logo w = 200, h = 78
vcap_drv: V0.2.17
I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0056): Fail!
I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0054): Fail!
TW-2865: Input 27 MHz, Output data 108MHz
I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0056): Fail!
I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0054): Fail!
TW-2865: Set I2C Command to NTSC mode I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0056): Fail!
I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0054): Fail!
Success!
Set 2 to 0xca register
I2C:ACK was not received
I2C:ACK was not received
vcap_dev: [0]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [0]: Link List mode!
vcap_drv: fosd00: minor=59
vcap_drv: fosd02: minor=58
vcap_drv: fosd01: minor=57
vcap_drv: fosd03: minor=56
vcap_dev: [1]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [1]: Link List mode!
vcap_drv: fosd10: minor=55
vcap_drv: fosd12: minor=54
vcap_drv: fosd11: minor=53
vcap_drv: fosd13: minor=52
vcap_dev: [2]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [2]: Link List mode!
vcap_drv: fosd20: minor=51
vcap_drv: fosd22: minor=50
vcap_drv: fosd21: minor=49
vcap_drv: fosd23: minor=48
vcap_dev: [3]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [3]: Link List mode!
vcap_drv: fosd30: minor=47
vcap_drv: fosd32: minor=46
vcap_drv: fosd31: minor=45
vcap_drv: fosd33: minor=44
vcap_dev: [4]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [4]: Link List mode!
vcap_drv: fosd40: minor=43
vcap_drv: fosd42: minor=42
vcap_drv: fosd41: minor=41
vcap_drv: fosd43: minor=40
vcap_dev: [5]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [5]: Link List mode!
vcap_drv: fosd50: minor=39
vcap_drv: fosd52: minor=38
vcap_drv: fosd51: minor=37
vcap_drv: fosd53: minor=36
vcap_dev: [6]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [6]: Link List mode!
vcap_drv: fosd60: minor=35
vcap_drv: fosd62: minor=34
vcap_drv: fosd61: minor=33
vcap_drv: fosd63: minor=32
vcap_dev: [7]:bAlbum_bug=0, bCrop_bug=0, bCU_bug=0
LL_BusDeadlock_bug=0, bSupportSplitOSDDispRamWritePort=1
vcap_drv: [7]: Link List mode!
vcap_drv: fosd70: minor=31
vcap_drv: fosd72: minor=30
vcap_drv: fosd71: minor=29
vcap_drv: fosd73: minor=28
FAVC Decoder IRQ mode(30)v3.3
FAVC Encoder IRQ mode(29)v3.3
The Driver Max Resolution is 720x576
GM8181 platform
MCP100 driver with Sequencer, default res 720 x 576
GM8181 MJPEG with Sequencer, max res 720 x 576, encoder ver: 3.21, decoder ver: 3.10
FTDI210 registers 16 entities to video graph!
FTDI210 Driver v0.8 (2 engine(s))
DVR COMMON driver inserts OK!
DVR DISP driver inserts OK!
DVR ENC Driver inserts OK! (enc_func=0 main_max=1 sub1_max=2 sub2_max=3)
DVR DEC driver inserts OK!
FTMAC with ICPLUS PHY IP101A support
MAC addr = 0:84:14:20:47:0
eth0:ftgmac100_reset
FULL
PHY_SPEED_100M
Debug Mode:11
xxxxxxxx port = 80 xxxxxxxxx
socket: Address family not supported by protocol
/bin/web/mini_httpd: started as root without requesting chroot(), warning only
chroma_qp_index_offset:-5
alpha_offset:6
beta_offset:6
clock adjustment
tods1307 Real Time Clock driver
ols server started
/bin/sh: can't access tty; job control turned off
/ # hw: 0 ch: 0 fac: 5 tv: 5 upgrade_flag: 6 rom_len: 221336 logo cnt: 7 default lang: 0
index.htm /bin/web/index.htm
LvrWeb.cab /bin/web/LvrWeb.cab
logo w = 4d54483c, h = a0d3e4c
logo w = 4643534d, h = 0
<<<<<< lvr version 5.99 >>>>>>
is @vga vga
tv decoder type[2865]
hardware batch = 2
old lvrVersion=563
xxxx ret = 0, old version = 563
CONFIGSIZE=13248, left=0, offset=13248, ret=13248
new lvrVersion=563
time = Sat Jan 1 00:01:20 2000
front chip = 2 is pal = 0
fchip_2865_patch =2
set -----------------------11--
adj sharpness of all ch val = 1
sysEncodeFormat = 1
send register to tools_server
send register to tools_server
send register to tools_server
connect to tools server: No such file or directory
read222: contrast=42, bright=15, sat1=0, volume=4
lvr-pid : main_thr_proc=294
lvr-pid : PrimaryModule=313
open UART 2
entering open /dev/ttyS1
open successful
enter set parity
enter set speed
open panel com successful
Primary Module : Distribute Conn Number = 0, socket = 14
Primary Module : Distribute Conn Number = 1, socket = 15
MAIN_MANAGE_MODULE register success! fd=14
lvr-pid : main_msg_recv=314
MAIN_MANAGE_MODULE recei##### Set display 0 out_system 2, fps 25
ve####dvr_graph_apply_property:suspend
register ack!
lvr-pid : panel_msg_recv=318
PANEL_MODULE receive register a####dvr_graph_apply_property:start
ck!
start read panel data
mobileVersion = 102
listen_fd set
panel cmd proc connectedlvr-pid : panel_proc_msg_recv=321
lvr-pid : trSysTimerInit=322
lvr-pid : SysClockMain=323
xxxxxxxxx test_timer = 0
===== dvr_fd = 23 =====
LCD(1): target(-1) dim(1024-768) plane_comb(1) system(-1) mode(0)
: color attrib.: br(15)sa(32)co(5)-hus(0)huc(32)sh0(1)sh1-(2)shth0(4)shth1(16)
: transparent: color1(0,0) color2(0,0)
: vbi info: lineno(0) lineheight(0) fb_offset(0) fb_size(0)
: lcd scaler: enable(0) WH(0-5229992)
####dvr_graph_apply_property:suspend
####dvr_graph_apply_property:start
####dvr_graph_apply_property:suspend
inLCD: Output resolution is 1024x768/60HZ.
_rLCD: Input resolution is 1024x768(XVGA)
es####dvr_graph_apply_property:start
= 2, out_res =TW-2865: Set I2C Command to PAL mode 2
I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0056): Fail!
I2C:ACK was not received
err(i2c_xfer)::-121
!<3>TW-2865(tw_array_write): I2C(0054): Fail!
Success!
: [0]:OSD P1 default fonts num=32
vcap_drv: [0]:IN=TW2865
: [1]:OSD P1 default fonts num=32
vcap_drv: [1]:IN=TW2865
: [2]:OSD P1 default fonts num=32
vcap_drv: [2]:IN=TW2865
: [3]:OSD P1 default fonts num=32
vcap_drv: [3]:IN=TW2865
: [4]:OSD P1 default fonts num=32
vcap_drv: [4]:IN=TW2865
: [5]:OSD P1 default fonts num=32
vcap_drv: [5]:IN=TW2865
: [6]:OSD P1 default fonts num=32
vcap_drv: [6]:IN=TW2865
: [7]:OSD P1 default fonts num=32
vcap_drv: [7]:IN=TW2865
set chip0 rec 1 mode
set chip1 rec 1 mode
Primary Module : Distribute Conn Number = 2, socket = 30
multi win register success! fd=30
lvr-pid : multiwin_msg_recv=324
MULTI_WIN_MODULE receive register ack!
MULTI_WIN_MODULE receive register ack!
##### Transfer Group 0 from wg0 to wg1 Done,state 4 at 0x94eb wait 128ms!
length = 65537
6c6f6e676c6f0100000000005803000000000000
file closed
Primary Module : Distribute Conn Number = 3, socket = 34
Log Manage module register success! fd=34
lvr-pid : log_msg_recv=325
LOG_MANAGE_MODULE receive register ack!
Primary Module : Distribute Conn Number = 4, socket = 36
Record Manage module register success! fd=36
lvr-pid : rec_msg_recv=326
rec server listen fd=38
REC_MANAGE_MODULE receive register ack!
record proc old prio = 0
record proc new prio = -5
lvr-pid : record_process=327
fd_rec_msg = 39
rec connect to fd_rec_msg succ, fd=39
rec registe to fd_rec_msg succ
fd_rec = -4
lvr-pid : rec_backup_thr_proc=329
fd_rec_backup_msg=51
dec registe to fd_rec_backup_msg succ
file_len = 0
/dev/sda fd_rec = -4
slot[0], get_dev_power_state = 0
/bin/hdparm -g /dev/sda
fd_rec = -4
/dev/sda:
geometry = 9729/255/63, sectors = 156299375, start = 0
[pppf]:00 c = 9729, h = 255, s = 63, 156299375, 0
fd_rec = -4
/bin/hdparm -I /dev/sda
/dev/sda:
fd_rec = -4
cap = 76318, h = 255, s = 63, c = 9729
lvr-pid : scan_power_state=343
/bin/dumpe2fs -h /dev/sda1
dumpe2fs 1.40.8 (13-Mar-2008)
fd_rec = -4
[pppf]:00 1 0 1 -1 946684979 0
fd_rec = -4
fs_status = 0
max_mount_count = -1, check_interval = 0
/bin/e2fsck -p /dev/sda1
/dev/sda1: recovering journal
fd_rec = -4
fd_rec = -4
/dev/sda1: Superblock last mount time is in the future. FIXED.
/dev/sda1: clean, 13/128 files, 1048/26105 blocks
[pppf]:00
scan_fs ret = 0
/bin/busybox mkdir -p /kjournald starting. Commit interval 60 seconds
mnEXT3-fs: mounted filesystem with ordered data mode.
t/sda1
/bin/busybox mount -t ext3 -r -o noatime,commit=60 /dev/sda1 /mnt/sda1
fd_rec = -4
/bin/busybox umount /mnt/sda1
/bin/dumpe2fs -h /dev/sda2
dumpe2fs 1.40.8 (13-Mar-2008)
[pppf]:00 1 0 1 -1 946684967 0
fd_rec = -4
fs_status = 0
max_mount_count = -1, check_interval = 0
/bin/e2fsck -p /dev/sda2
fd_rec = -4
/dev/sda2: recovering journal
fd_rec = -4
kjournald starting. Commit interval 60 seconds
fEXT3-fs: mounted filesystem with ordered data mode.
d_rec = -4
/dev/sda2: Superblock last mount time is in the future. FIXED.
/dev/sda2: clean, 11/6368 files, 13103/6500300 blocks
[pppf]:00
scan_fs ret = 0
/bin/busybox mkdir -p /mnt/sda2
/bin/busybox mount -t ext3 -r -o noatime,commit=60 /dev/sda2 /mnt/sda2
fd_rec = -4
/bin/busybox umount /mnt/sda2
/bin/dumpe2fs -h /dev/sda3
fd_rec = -4
dumpe2fs 1.40.8 (13-Mar-2008)
[pppf]:00 1 0 1 -1 946684971 0
fd_rec = -4
fs_status = 0
max_mount_count = -1, check_interval = 0
/bin/e2fsck -p /dev/sda3
/dev/sda3: recovering journal
fd_rec = -4
fd_rec = -4
kjournald starting. Commit interval 60 seconds
fdEXT3-fs: mounted filesystem with ordered data mode.
_rec = -4
/dev/sda3: Superblock last mount time is in the future. FIXED.
/dev/sda3: clean, 11/6368 files, 13103/6500300 blocks
[pppf]:00
scan_fs ret = 0
/bin/busybox mkdir -p /mnt/sda3
/bin/busybox mount -t ext3 -r -o noatime,commit=60 /dev/sda3 /mnt/sda3
fd_rec = -4
/bin/busybox umount /mnt/sda3
/bin/dumpe2fs -h /dev/sda4
dumpe2fs 1.40.8 (13-Mar-2008)
[pppf]:00 1 0 1 -1 946684975 0
fd_rec = -4
fs_status = 0
max_mount_count = -1, check_interval = 0
/bin/e2fsck -p /dev/sda4
fd_rec = -4
/dev/sda4: recovering journal
fd_rec = -4
fd_rec = -4
/dev/sda4: Superblock last mount time is in the future. FIXED.
/dev/sda4: clean, 11/6368 files, 13103/6500300 blocks
[pppfkjournald starting. Commit interval 60 seconds
]:00 EXT3-fs: mounted filesystem with ordered data mode.
scan_fs ret = 0
/bin/busybox mkdir -p /mnt/sda4
/bin/busybox mount -t ext3 -r -o noatime,commit=60 /dev/sda4 /mnt/sda4
fd_rec = -4
/bin/busybox umount /mnt/sda4
/bin/busybox mdev -s
fd_rec = -4
/bin/busybox mkdir -p /mnt/sda1
kjournald starting. Commit interval 5 seconds
/bin/busEXT3 FS on sda1, ybinternal journal
oxEXT3-fs: mounted filesystem with ordered data mode.
mount -t ext3 -o noatime /dev/sda1 /mnt/sda1
fd_rec = -4
kjournald starting. Commit interval 5 seconds
***sEXT3 FS on sda2, eninternal journal
d EXT3-fs: mounted filesystem with ordered data mode.
REC_HD_ALARM_DISK_SCAN***
find module fail,tagModule=2, cmdTag=9001e
/bin/busybox mkdir -p /mnt/sda2
fd_rec = -4
/bin/busybox mount -t ext3 -o noatime /dev/sda2 /mnt/sda2
fd_rec = -4
/bin/busybox mkdir -p /mnt/sda3
/bin/busybox mount -t ext3 -o noatime /dev/sda3 /mnt/sda3
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
fd_rEXT3 FS on sda4, ecinternal journal
=EXT3-fs: mounted filesystem with ordered data mode.
-4
/bin/busybox mkdir -p /mnt/sda4
/bin/busybox mount -t ext3 -o noatime /dev/sda4 /mnt/sda4
======== rec_index_rebuild =======
fd_rec = -4
REC_FILECNT = 0
rec_index_cnt = 0
--- first use this hd---
curr_hd=0, curr_partition=1
heap malloc:5c9068 256
block[0] malloc:5cb210 256
block[1] malloc:5cb318 256
fd_rec = -4
audio_frame malloc:4176a008 800000
lvr-pid : cap_enc_msg_proc=410
fd_rec = 54
rec connect to fd_enc_req succ, fd=54
rec registe to fd_enc_req succ
recv cap_enc_req register, refcnt = 3
H264 rate control version: fix 0.91
Primary Module : Distribute Conn Number = 5, socket = 57
AV_CODEC_TRANS_MODULE register success!fd=57
tcpServer malloc:5cb420 7148
Primary Module : Distribute Conn Number = 6, socket = 59
open apply fifo for write: No such file or directory
Commni Manager Module : send register message! client -> server, tcpServer->iModComManSockfd=58
COMMUNI_MANAGE_MODULE register success! fd=59
lvr-pid : frameTimer=412
lvr-pid : audio_cap_enc_proc=413
audio_data malloc:4182e008 1320000
recv audio cap[0] register
AVCodec old prio = 0
AVCodec new prio = -5
lvr-pid : AVCodec_trans_module=415
avcodec->fd_cap_enc=63
nettrans connect to fd_enc_req succ
nettrans registe to fd_enc_req succ
recv cap_enc_req register, refcnt = 3
cap_enc old prio = 0
cap_enc new prio = 5
lvr-pid : cap0_enc_proc=41
##### Transfer Group 2 from wg0 to wg1 Done,state 4 at 0xa9a9 wait 180ms!
1
fd_cap_enc_msg
##### Transfer Group 1 from wg0 to wg1 Done,state 4 at 0xa9c3 wait 206ms!
=66
c
##### Transfer Group 4 from wg0 to wg1 Done,state 4 at 0xa9db wait 230ms!
ap connect t
##### Transfer Group 3 from wg0 to wg1 Done,state 4 at 0xa9f2 wait 253ms!
o fd_enc_req succ
recv cap[0] register
cap registe to fd_enc_req succ
width = 352, height = 288
in try_select_md_stream, intend str
##### Transfer Group 5 from wg0 to wg1 Done,state 4 at 0xaa2c wait 311ms!
eam =
##### Transfer Group 6 from wg0 to wg1 Done,state 4 at 0xaa42 wait 333ms!
0
##### Transfer Group 7 from wg0 to wg1 Done,state 4 at 0xaa59 wait 356ms!
do_
##### Transfer Group 8 from wg0 to wg1 Done,state 4 at 0xaa6e wait 377ms!
md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 0, alarm_th= 1, mb_cell_th = 7
eth0:ftgmac100_reset
lvr-pid : pppoe_ddFULL
ns_PHY_SPEED_100M
proc=416
/bin/udhcpc
udhcpc (v1.13.4) started
Sending discover...
hd_user_cnt == 0
vcap_lli(lli_do_remove_lli): [4]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
printk: 6 messages suppressed.
vcap_lli(lli_do_remove_lli): [5]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
Sending discover...
Sending discover...
exec timeout
zzzzzzzzzzzzzzzzzzzzzzzzzz
listen_fd set
pppoe client connect
ddns client connect
echo pppoe get client id
listen_fd set
echo ddns get client id
lvr-pid : NetServerModule=424
listen port = 7777
listen socket = 82, local listen = 85
99999999999999999999999999999999999999 ==1
vga is already inited
adj sharpness of all ch val = 1
#######123333##########
listen_fd set
echo kbd msg
open kbd successful
begin open mouse
listen_fd set
send mouse id
echo mouse msg
open mouse successful
logo w = 336, h = 252
(osd_ioctl): [0]:P1>FIOSDS_RMCHAR(-22)
$$(osd_drv_ioctl): [0]:P1>Does not support 0x40016609 command!
$$$$$$$$$$ read swi(osd_ioctl): [0]:P1>FIOSDS_RMCHAR(-22)
tc(osd_drv_ioctl): [0]:P1>Does not support 0x40016609 command!
h info : ,(osd_ioctl): [0]:P1>FIOSDS_RMCHAR(-22)
la(osd_drv_ioctl): [0]:P1>Does not support 0x40016609 command!
ng code =(osd_ioctl): [0]:P1>FIOSDS_RMCHAR(-22)
0
lan(osd_drv_ioctl): [0]:P1>Does not support 0x40016609 command!
g code = 1
lang code = 2
lang code = 3
lang code = 4
lang code = 5
lang code = 6
lang code = 7
lang code = 8
lang code = 9
osd run...
fchipdev_addr = 50, poll_interval = 2
_position_adjdefault ch = 0, x=-4, y=0
----
fchip_position_adjdefault ch = 1, x=-4, y=0
----
fchip_position_adjdefault ch = 2, x=-4, y=0
----
fchip_position_adjdefault ch = 3, x=-4, y=0
----
fchip_position_adjdefault ch = 4, x=-4, y=0
----
fchip_position_adjdefault ch = 5, x=-4, y=0
----
fchip_position_adjdefault ch = 6, x=-4, y=0
----
fchip_position_adjdefault ch = 7, x=-4, y=0
----
lvr-pid : fchip_proc=433
tv_sys = ffff
size=8, 12
Primary Module : Distribute Co(osd_ioctl): [0]:P1>FIOSDS_RMCHAR(-22)
nn Nvcap_lli(lli_do_remove_lli): [4]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
umber (osd_drv_ioctl): [0]:P1>Does not support 0x40016609 command!
= 7, socket = 93
decode playback module register success! fd=93
lvr-pid : dec_msg_recv=435
dec server listen fd=94
(osd_ioctl): [1]:P1>FIOSDS_RMCHAR(-22)!
(osd_drv_ioctl): [1]:P1>Does not support 0x40016609 command!
Primary (osd_ioctl): [1]:P1>FIOSDS_RMCHAR(-22)
Mo(osd_drv_ioctl): [1]:P1>Does not support 0x40016609 command!
dule : Distr(dataout_5) Timeout to wait AP buffer get, skip job! (0xd65f vs 0xd80a)
ibute Conn Number = 8, socket = 96
PTZ Control module register success! fd=96
alarm int 2835..........................
Primary Module : Distribute Conn Number = 9, socket = 99
ALARM_MODULE register success! fd=99
***************info[0] = ff
***************info[1] = 100ff
lvr-pid : dec_thr_proc=436
dec[0] connected,fd=102
fd_dec_msg=101
recv DEC_CMD_VIDEO_REG
(osd_ioctl): [1]:P1>FIOSDS_RMCHAR(-22)
de(osd_drv_ioctl): [1]:P1>Does not support 0x40016609 command!
c registe to fd(osd_ioctl): [1]:P1>FIOSDS_RMCHAR(-22)
_dec_ms(osd_drv_ioctl): [1]:P1>Does not support 0x40016609 command!
g succ
wm_co(osd_ioctl): [1]:P1>FIOSDS_RMCHAR(-22)
mmand = (osd_drv_ioctl): [1]:P1>Does not support 0x40016609 command!
20
AP PB mmap=(osd_ioctl): [2]:P1>FIOSDS_RMCHAR(-22)
=>(osd_drv_ioctl): [2]:P1>Does not support 0x40016609 command!
ch[0] addr(42f74000) size(1048576)
wm_command = 20
AP PB mmap==> ch[1] addr(43074000) size(1048576)
wm_command = 20
AP PB mmap==> ch[2] addr(43174000) size(1048576)
wm_command = 20
AP(osd_ioctl): [2]:P1>FIOSDS_RMCHAR(-22)
P(osd_drv_ioctl): [2]:P1>Does not support 0x40016609 command!
B mmap==> ch[3] (osd_ioctl): [2]:P1>FIOSDS_RMCHAR(-22)
ad(osd_drv_ioctl): [2]:P1>Does not support 0x40016609 command!
dr(43274000) siz(osd_ioctl): [2]:P1>FIOSDS_RMCHAR(-22)
e((osd_drv_ioctl): [2]:P1>Does not support 0x40016609 command!
1048576)
wm_com(osd_ioctl): [2]:P1>FIOSDS_RMCHAR(-22)
man(osd_drv_ioctl): [2]:P1>Does not support 0x40016609 command!
d = 20
AP PB mmap==> ch[4] addr(43374000) size(1048576)
wm_command = 20
AP PB mmap==> ch[5] addr(4(osd_ioctl): [3]:P1>FIOSDS_RMCHAR(-22)
347(osd_drv_ioctl): [3]:P1>Does not support 0x40016609 command!
4000) size(1048576(osd_ioctl): [3]:P1>FIOSDS_RMCHAR(-22)
(osd_drv_ioctl): [3]:P1>Does not support 0x40016609 command!
wm_command = 20
AP PB mmap=(osd_ioctl): [3]:P1>FIOSDS_RMCHAR(-22)
=> (osd_drv_ioctl): [3]:P1>Does not support 0x40016609 command!
ch[6] addr(43574000) size(1048576(osd_ioctl): [3]:P1>FIOSDS_RMCHAR(-22)
(osd_drv_ioctl): [3]:P1>Does not support 0x40016609 command!
wm_command = 20
AP PB mmap==> ch[7] addr(43674000) size(1048576)
====(osd_ioctl): [3]:P1>FIOSDS_RMCHAR(-22)
==(osd_drv_ioctl): [3]:P1>Does not support 0x40016609 command!
== dec_init =========
max(osd_ioctl): [4]:P1>FIOSDS_RMCHAR(-22)
_l(osd_drv_ioctl): [4]:P1>Does not support 0x40016609 command!
en=6, rindex=5
lvr-pid : dec_sig_thr_proc=(osd_ioctl): [4]:P1>FIOSDS_RMCHAR(-22)
437(osd_drv_ioctl): [4]:P1>Does not support 0x40016609 command!
lvr-pid : audio_dec_thr_proc=438
dec[(osd_ioctl): [4]:P1>FIOSDS_RMCHAR(-22)
1](osd_drv_ioctl): [4]:P1>Does not support 0x40016609 command!
connected,fd=112
fd_au(osd_ioctl): [4]:P1>FIOSDS_RMCHAR(-22)
_dec_(osd_drv_ioctl): [4]:P1>Does not support 0x40016609 command!
msg=111
recv DEC_CMD_AUDIO_REG
dec regi(osd_ioctl): [4]:P1>FIOSDS_RMCHAR(-22)
ste(osd_drv_ioctl): [4]:P1>Does not support 0x40016609 command!
to fd_dec_msg succ
ala(osd_ioctl): [5]:P1>FIOSDS_RMCHAR(-22)
rm_wor(osd_drv_ioctl): [5]:P1>Does not support 0x40016609 command!
karound
lvr-pid : alarm_msg_r(osd_ioctl): [5]:P1>FIOSDS_RMCHAR(-22)
ecv=4(osd_drv_ioctl): [5]:P1>Does not support 0x40016609 command!
40
alarm server listen fd=114
ALARM_MODULE receive register ack!
lvr-pid : alarm_smtp_thr_proc=44(osd_ioctl): [5]:P1>FIOSDS_RMCHAR(-22)
(osd_drv_ioctl): [5]:P1>Does not support 0x40016609 command!
fd_alarm_smtp_msg=115
dec (osd_ioctl): [5]:P1>FIOSDS_RMCHAR(-22)
re(osd_drv_ioctl): [5]:P1>Does not support 0x40016609 command!
giste to fd_alarm_smtp(osd_ioctl): [5]:P1>FIOSDS_RMCHAR(-22)
_msg(osd_drv_ioctl): [5]:P1>Does not support 0x40016609 command!
succ
lvr-pid : alarm_manage=442
lvr-(osd_ioctl): [6]:P1>FIOSDS_RMCHAR(-22)
pid (osd_drv_ioctl): [6]:P1>Does not support 0x40016609 command!
: PtzModule=439
open s(osd_ioctl): [6]:P1>FIOSDS_RMCHAR(-22)
ucces(osd_drv_ioctl): [6]:P1>Does not support 0x40016609 command!
sful
ptzcontrol module regis(osd_ioctl): [6]:P1>FIOSDS_RMCHAR(-22)
ter ac(osd_drv_ioctl): [6]:P1>Does not support 0x40016609 command!
k...
lvr-pid : alarmin(osd_ioctl): [6]:P1>FIOSDS_RMCHAR(-22)
_ma(osd_drv_ioctl): [6]:P1>Does not support 0x40016609 command!
nage=443
init alarm_value = ff
Schedu(osd_ioctl): [6]:P1>FIOSDS_RMCHAR(-22)
le(osd_drv_ioctl): [6]:P1>Does not support 0x40016609 command!
r module socket is 120
Scheduler(osd_ioctl): [7]:P1>FIOSDS_RMCHAR(-22)
M(osd_drv_ioctl): [7]:P1>Does not support 0x40016609 command!
odule : send register message! cl(osd_ioctl): [7]:P1>FIOSDS_RMCHAR(-22)
ie(osd_drv_ioctl): [7]:P1>Does not support 0x40016609 command!
nt -> server, iM(osd_ioctl): [7]:P1>FIOSDS_RMCHAR(-22)
od(osd_drv_ioctl): [7]:P1>Does not support 0x40016609 command!
SchedulerSockfd=120
Prim(osd_ioctl): [7]:P1>FIOSDS_RMCHAR(-22)
ar(osd_drv_ioctl): [7]:P1>Does not support 0x40016609 command!
y Module : Di(osd_ioctl): [7]:P1>FIOSDS_RMCHAR(-22)
stri(osd_drv_ioctl): [7]:P1>Does not support 0x40016609 command!
bute Conn Number = 10, socket = 121
---CreateOnTheHourTimer start ---
onTheHourTimeout = 3502000, hour = 0
CreateHourScheduler, wday=6, hour=0
--xxxx-- timer_sync =9----
ch0, SCREEN_EN_BIT on
ch1, SCREEN_EN_BIT on
ch2, SCREEN_EN_BIT on
ch3, SCREEN_EN_BIT on
ch4, SCREEN_EN_BIT on
ch5, SCREEN_EN_BIT on
ch6, SCREEN_EN_BIT on
ch7, SCREEN_EN_BIT on
lvr-pid : SchedulerRecv=444
SCHEDULER_MANAGE_MODULE receive register ack!
ioctl error: Cannot assign requested address
lvr-pid : RtspServerRunning=445
>>>>>>>>>>>>RtspServerRunning, ipaddr = rtsp connect to fd_enc_req succ, fd=123
recv cap_enc_req register, refcnt = 3
rtsp registe to fd_enc_req succ
[+] TCP Socket erstellt!
[*] Listening on: 0.0.0.0
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
in try_select_md_stream, intend stream = 0
do_md_init stream=0, mbw=22, mbh=18
sensitive = 2, alarm_th= 12, mb_cell_th = 17
no change tw2865_audio_aogian in val 4 == reg 4
2volume = 4
vcap_lli(lli_do_remove_lli): [6]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
vcap_lli(lli_do_remove_lli): [7]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
start alarm out......ch=0++++
start alarm out......ch=1++++
alarm_workaround
v0.1 vtd_open
record init reend poll_wait ------1
t = 0
#######bchip_detect_run##@@@@@@
@1#1@
bchip_get_output_type VGA
first read output type
#######123333##########
--detect output is VGA
---------no------IS_DETE_ATUO--
vcap_lli(lli_do_remove_lli): [7]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
vcap_lli(lli_do_remove_lli): [7]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
rec videoloss ch[0] start
rec videoloss ch[1] start
rec videoloss ch[2] start
rec videoloss ch[3] start
rec videoloss ch[4] start
rec videoloss ch[5] start
rec videoloss ch[6] start
rec videoloss ch[7] start
end poll_wait ------0
key: 1, f8, 1d
vcap_lli(lli_do_remove_lli): [5]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
vcap_lli(lli_do_remove_lli): [6]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
vcap_lli(lli_do_remove_lli): [7]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
vcap_lli(lli_do_remove_lli): [7]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
vcap_lli(lli_do_remove_lli): [7]:P1>Sub list(0) does not update status!(H=0x00000000,S=0xe0000001), bDMA=0
