瑞泰 omap l137 评估版烧写过程

网页 里面提供的烧写工具。是在arm下执行的，这个out有时候会下载不进去，所以提供一个可在dsp下执行烧写的out
附件中即使。
使用步骤
拨码开关状态设置，u25 123全on  4 off   u26 2和4 on 1 和3off 这种方式是仿真模式。
首先连接仿真器，到dsp，然后
First burn the DSP AIS image.
Load dsp_nand_writer.out (File->Load Program) and run the program (Debug->Run).
Enter dspais as the image type at the first prompt.
When prompted for a file name, provide /dsp-spi-ais.bin. NOTE: You cannot have spaces in the path.
When the process completes (Stdout window will mention that the files match) select Debug->Restart
Next burn the ARM UBL.
Run the program (Debug->Run).
Enter armubl as the image type at the first prompt.
When prompted for a file name, provide /ubl-spi.bin. NOTE: You cannot have spaces in the path.
When the process completes (Stdout window will mention that the files match) select Debug->Restart
Finally burn U-Boot.
Run the program (Debug->Run).
Enter uboot as the image type at the first prompt.
When prompted for a file name, provide /u-boot.bin. NOTE: You cannot have spaces in the path.
When the process completes (Stdout window will mention that the files match) close all CCS windows
设拨码开关 u26的4到off端，这种方式是nand直接boot方式。连接串口到pc机的超级终端，可看见uboot的信息，
第一次启动需要等到uboot查找bad block table 大约等待一分钟，更新坏块表后再次启动后就不会等待立刻进入uboot提示符。
之后可安网页说明通过tftp烧写uImage 建立nfs文件系统等。