seu 注释快捷键 带颜色显示

代码是参考网上给的，增加以下代码就可以使注释行显示白色

EVAL %SUBST(SOURCESTMT:6:1) =X'22'

常用的颜色属性有：
x'21' 反白 Reverse
x'22' 高亮度 HI
x'23' 高亮度反白 HI reverse
x'28' 红色 Red
x'29' 红色反白 Red reverse
x'2A' 闪烁 Blink

 

使用方法：seu在编辑代码的模式下 按shift+F1 在最后一个参数 EXIT PROGRAM 填写以下代码编译的pgm就可以了

 

H**********************************************************************
H* SOURCE的注释功能,在代码行中按下F7在注释和非注释行之间进行切换
H*  注释行颜色显示白色 .
H*
H*        RPGLE - SEUCMT  - ADD COMMENT IN SEU                        *
*                                                                    *
*    COPYRIGHT (C) 2005 YAO ZHONGGUANG.  ALL RIGHTS RESERVED.        *
H**********************************************************************
H DATEDIT(*YMD)
H TIMFMT(*HMS)
**********************************************************************   
*    DEFINITION SPECIFICATIONS
**********************************************************************
**********************************************************************
* Entry Parameters declarations
**********************************************************************
D ParmSeuInput    S               *
D ParmSeuOut      S               *
D ParmSeuLine     S               *
**********************************************************************
* Header information
**********************************************************************
D HeaderInfo      DS                  BASED(ParmSeuInput)
D  RecLength              1      4B 0
D  CursorRRN              5      8B 0
D  CursorPos              9     12B 0
D  CCSID                 13     16B 0
D  InRecords             17     20B 0
D  MemberName            21     30
D  FileName              31     40
D  LibraryName           41     50
D  MemberType            51     60
D  CmdKey                61     61
D  Mode                  62     62
D  SplitSess             63     63
D  Res                   64     64
**********************************************************************
* Return Codes
**********************************************************************
D ReturnInfo      DS                  BASED(ParmSeuOut)
D  RetCode                1      1
D  Res2                   2      4
D  OutRecords             5      8B 0
D  InsertSeq              9     15
D  Res3                  16     37
**********************************************************************
* Line Command and Text
**********************************************************************
D LineInfo        DS                  BASED(ParmSeuLine)
D  LineCmd                       7
D  LineRetCode                   1
D  SourceSeq                     6
D  SourceDate                    6
D  SourceStmt                  256
**********************************************************************
* Send message API
**********************************************************************
D SndPgmMsg       PR                  ExtPgm('QMHSNDPM')
D  MsgID                         7    Const
D  MsgFile                      20    Const
D  MsgData                     256    Const
D  MsgDataLen                   10i 0 Const
D  MsgType                      10    Const
D  MsgStackEnt                  10    Const
D  MsgStackCnt                  10i 0 Const
D  MsgKey                        4    Const
D  MsgAPIError                        like(APIError)
**********************************************************************
* API error structure
**********************************************************************
D APIError        DS                  inz
D  ErrSSize                     10i 0 inz(%len(APIError))
D  ErrSUse                      10i 0
D  ErrSMsgID                     7
D  ErrSResrv                     1
D  ErrSData                     80
**********************************************************************
* Work Variables
**********************************************************************
D wMsgID          S              7
D wSource         S            256    Varying
D wPos            S              3S 0
D wSourceLen      S             10i 0
D wBlankLine      S                   Like(LineCmd)
D wFirstLine      S               *
D wWorkLine       S               *
**********************************************************************
*    Work Const
**********************************************************************
D wCmtS           C                   Const('/*')
D wCmtE           C                   Const('*/')
**********************************************************************
*    CALCULATION SPECIFICATIONS
**********************************************************************
*
C     *Entry        Plist
C                   Parm                    ParmSeuInput
C                   Parm                    ParmSeuOut
C                   Parm                    ParmSeuLine
*
**********************************************************************
*    M A I N - R O U T I N E
**********************************************************************
C*
C* Update Mode
C                   If        Mode = 'U'
C*
C     CmdKey        CasNE     '0'           SubLineKey
C                   Endcs
C*
C                   Else
C* Browse Mode
C                   Eval      RetCode = '1'
C                   Eval      wMsgID  = 'EDT1202'
C                   Exsr      SubSndMsg
C*
C                   Endif
C* Return
C                   Eval      *InLr = *On
C                   Eval      *InRt = *On
C*
**********************************************************************
*
**********************************************************************
C     SubLineKey    Begsr
C*
C                   If        CmdKey    = '7'
C*
C                   If        CursorPos = 0
C                   Eval      RetCode   = '1'
C                   Eval      wMsgID    = 'EDT2010'
C                   Exsr      SubSndMsg
C                   Else
C                   Exsr      SubSltType
C                   Endif
C*
C                   Else
C*
C                   Eval      RetCode   = '1'
C                   Eval      wMsgID    = 'EDT0001'
C                   Exsr      SubSndMsg
C*
C                   Endif
C*
C                   Endsr
**********************************************************************
*
**********************************************************************
C     SubSltType    Begsr
C*
C                   Select
C*
C                   When      %Subst(MemberType:1:3) = 'CLP'
C                   Exsr      SubClpCmt
C                   When      %Subst(MemberType:1:3) = 'RPG'  Or
C                             %Subst(MemberType:4:3) = 'RPG'  Or
C                             %Subst(MemberType:1:2) = 'PF'   Or
C                             %Subst(MemberType:1:2) = 'LF'   Or
C                             %Subst(MemberType:1:4) = 'DSPF' Or
C                             %Subst(MemberType:1:4) = 'PRTF'
C                   Exsr      SubRpgCmt
C*
C                   Endsl
C*
C                   Endsr
**********************************************************************
*
**********************************************************************
C     SubClpCmt     Begsr
C*
C                   Eval      SourceStmt = %Subst(SourceStmt:1:RecLength)
C                   Eval      %Len(wSource) = RecLength
C                   Eval      wSource = %Trim(SourceStmt)
C*
C                   If        wSource = *Blanks
C                   Eval      RetCode = '1'
C                   Goto      SubClpCmtEnd
C                   Endif
C*
C* Remove Comment
C                   If        %Subst(wSource:1:2) = wCmtS
C*
C                   Eval      wPos = %Scan(wCmtS:SourceStmt)
C                   Eval      %Subst(SourceStmt:wPos:2) = '  '
C                   Eval      wPos = %Scan(wCmtE:SourceStmt)
C                   Eval      %Subst(SourceStmt:wPos:2) = '  '
C* Add Comment
C                   Else
C*
C                   Eval      wSource = wCmtS
C                                     + ' '
C                                     + %Trim(wSource)
C                                     + ' '
C                                     + wCmtE
C*
C     ' '           Check     SourceStmt    wPos
C*
C                   If        wPos < 4
C                   Eval      SourceStmt = wSource
C                   Else
C                   Eval      SourceStmt = *Blanks
C                   Eval      %Subst(SourceStmt:wPos-3) = wSource
C                   Endif
C*
C                   Endif
C*
C                   Exsr      SubUpd
C*
C     SubClpCmtEnd  Endsr
**********************************************************************
*
**********************************************************************
C     SubRpgCmt     Begsr
C*
C                   If        %Subst(SourceStmt:7:1) = '*'
C                   EVAL      %Subst(SourceStmt:7:1) = ' '
C                   EVAL      %SUBST(SOURCESTMT:6:1) =' '
C
C                   Else
C                   EVAL      %Subst(SourceStmt:7:1) = '*'
C                   EVAL      %SUBST(SOURCESTMT:6:1) =X'22'
C
C                   Endif
C*
C                   Exsr      SubUpd
C*
C                   Endsr
**********************************************************************
*
**********************************************************************
C     SubSndMsg     Begsr
C*
C                   Callp     SndPgmMsg(wMsgID:
C                                       'QEDTMSG   QPDA      ':
C                                       *Blanks:
C                                       *Zero:
C                                       '*INFO':
C                                       '*':
C                                       2:
C                                       *Blanks:
C                                       APIError)
C*
C                   Endsr
**********************************************************************
*
**********************************************************************
C     SubUpd        Begsr
C*
C                   Eval      Retcode = '0'
C                   Eval      OutRecords = 1
C*
C                   Endsr

 

参考网址 以便回看