我的以前是eth5
root@ubuntu:/etc/udev/rules.d# ifconfig
eth5 Link encap:Ethernet HWaddr 00:0c:29:c6:bc:7c
inet addr:192.168.16.25 Bcast:192.168.16.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fec6:bc7c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1111 errors:0 dropped:0 overruns:0 frame:0
TX packets:871 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:152479 (152.4 KB) TX bytes:106075 (106.0 KB)
Interrupt:18 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:80 errors:0 dropped:0 overruns:0 frame:0
TX packets:80 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4000 (4.0 KB) TX bytes:4000 (4.0 KB)
更改如下文件,看好你的mac地址
root@ubuntu:/etc/udev/rules.d# vim /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:0e:ad:8a", ATTR{type}=="1", KERNEL=="eth*", NAME="eth5"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:26:0b:66", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:d5:16:28", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:fe:47:db", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:3e:b1:4f", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"
下面这里mac地址我对应的,是eth5,我改为eth0了
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:c6:bc:7c", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
root@ubuntu:/etc/udev/rules.d# init 6
重启后从新登录
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:c6:bc:7c
inet addr:192.168.16.25 Bcast:192.168.16.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fec6:bc7c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34 errors:0 dropped:0 overruns:0 frame:0
TX packets:82 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8409 (8.4 KB) TX bytes:11509 (11.5 KB)
Interrupt:18 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:108 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6124 (6.1 KB) TX bytes:6124 (6.1 KB)
阅读(491) | 评论(0) | 转发(0) |