usb_get_configuration的用途为取得并设置所有的描述符
usb_get_configuration在/drivers/usb/core/config.c中
|
int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
//获取设备描述符中的配置数
int ncfg = dev->descriptor.bNumConfigurations;
int result = 0;
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
cfgno = 0;
if (dev->authorized == 0) /* Not really an error */
goto out_not_authorized;
result = -ENOMEM;
//检测设备的配置数是否超过最大值
if (ncfg > USB_MAXCONFIG)
{
dev_warn(ddev, "too many configurations: %d, " "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
}
//检测是否存在配置
if (ncfg < 1)
{
dev_err(ddev, "no configurations\n");
return -EINVAL;
}
//计算所有配置结构共需要的大小
length = ncfg * sizeof(struct usb_host_config);
//为所有配置结构分配空间
dev->config = kzalloc(length, GFP_KERNEL);
if (!dev->config)
goto err2;
//计算指向所有配置信息的指针共需要的大小
length = ncfg * sizeof(char *);
//为指向配置信息的指针分配空间
dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
//分配空间失败跳到出错处理
if (!dev->rawdescriptors)
goto err2;
//为配置信息中的配置描述符分配空间
buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
//分配空间失败跳到出错处理
if (!buffer)
goto err2;
//将得到的空间按配置描述符结构初始化
desc = (struct usb_config_descriptor *)buffer;
result = 0;
//历遍所有配置, usb11_rh_dev_descriptor中的配置数为1
for (; cfgno < ncfg; cfgno++)
{
/* We grab just the first descriptor so we know how long
* the whole configuration is */
//取得配置信息的前9字节,保存在buffer,这前9字节也就是配置描述符
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,buffer, USB_DT_CONFIG_SIZE);
if (result < 0)
{
dev_err(ddev, "unable to read config index %d " "descriptor/%s: %d\n", cfgno, "start", result);
dev_err(ddev, "chopping to %d config(s)\n", cfgno);
dev->descriptor.bNumConfigurations = cfgno;
break;
}
else if (result < 4)
{
dev_err(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno,USB_DT_CONFIG_SIZE, result);
result = -EINVAL;
goto err;
}
//计算配置信息的长度,小于USB_DT_CONFIG_SIZE则为USB_DT_CONFIG_SIZE
length = max((int) le16_to_cpu(desc->wTotalLength),USB_DT_CONFIG_SIZE);
/* Now that we know the length, get the whole thing */
//为信息描述符分配空间
bigbuffer = kmalloc(length, GFP_KERNEL);
//检测分配空间是否成功
if (!bigbuffer)
{
result = -ENOMEM;
goto err;
}
//取得配置信息,保存在bigbuffer
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,bigbuffer, length);
if (result < 0)
{
dev_err(ddev, "unable to read config index %d "
"descriptor/%s\n", cfgno, "all");
kfree(bigbuffer);
goto err;
}
if (result < length)
{
dev_warn(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno, length, result);
length = result;
}
//保存配置信息到配置信息指针数组中
dev->rawdescriptors[cfgno] = bigbuffer;
//分析配置信息
result = usb_parse_configuration(&dev->dev, cfgno, &dev->config[cfgno], bigbuffer, length);
if (result < 0)
{
++cfgno;
goto err;
}
}
result = 0;
}
|
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,buffer, USB_DT_CONFIG_SIZE);
这句代码和取得设备描述符一样,最后走到rh_call_control中,第一个switch的case依然为DeviceRequest | USB_REQ_GET_DESCRIPTOR,而第二个switch就不一样了,这次为配置信息,case为USB_DT_CONFIG << 8
uhci的配置信息为fs_rh_config_descriptor
这个结构如下
static const u8 fs_rh_config_descriptor [] = {
/* one configuration */
0x09, /* __u8 bLength; */
0x02, /* __u8 bDescriptorType; Configuration */
0x19, 0x00, /* __le16 wTotalLength; */
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
0xc0, /* __u8 bmAttributes;
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
/* USB 1.1:
* USB 2.0, single TT organization (mandatory):
* one interface, protocol 0
*
* USB 2.0, multiple TT organization (optional):
* two interfaces, protocols 1 (like single TT)
* and 2 (multiple TT mode) ... config is
* sometimes settable
* NOT IMPLEMENTED
*/
/* one interface */
0x09, /* __u8 if_bLength; */
0x04, /* __u8 if_bDescriptorType; Interface */
0x00, /* __u8 if_bInterfaceNumber; */
0x00, /* __u8 if_bAlternateSetting; */
0x01, /* __u8 if_bNumEndpoints; */
0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
0x00, /* __u8 if_bInterfaceSubClass; */
0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
0x00, /* __u8 if_iInterface; */
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
0x05, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
};
包括了一个配置描述符,一个接口描述符和一个端口描述符
注意有2次获取配置信息,这2次是不一样的,第1次是获取配置信息中的头部,也就是配置描述符,在配置描述符中有配置信息的大小,所以第一次主要是取得配置信息的大小,然后根据大小取得空间后,再获取一次配置信息
获取配置信息结束后就要开始分析配置信息中的描述符了
完成这个工作的是usb_parse_configuration
usb_parse_configuration在/drivers/usb/core/config.c中
|
static int usb_parse_configuration(struct device *ddev, int cfgidx,
struct usb_host_config *config, unsigned char *buffer, int size)
{
unsigned char *buffer0 = buffer;
int cfgno;
int nintf, nintf_orig;
int i, j, n;
struct usb_interface_cache *intfc;
unsigned char *buffer2;
int size2;
struct usb_descriptor_header *header;
int len, retval;
u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
unsigned iad_num = 0;
//复制配置信息的前9字节(也就是配置描述符)
//到dev->config[cfgidx]->desc中
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
//检测描述符的类型及长度是否正确
if (config->desc.bDescriptorType != USB_DT_CONFIG || config->desc.bLength < USB_DT_CONFIG_SIZE)
{
dev_err(ddev, "invalid descriptor for config index %d: "
"type = 0x%X, length = %d\n", cfgidx,
config->desc.bDescriptorType, config->desc.bLength);
return -EINVAL;
}
//取得配置中的配置值
cfgno = config->desc.bConfigurationValue;
//buffer指向接口描述符部分的起始位置
buffer += config->desc.bLength;
//计算配置信息除去配置描述符后的大小
size -= config->desc.bLength;
//取得该配置的接口数
nintf = nintf_orig = config->desc.bNumInterfaces;
//检测接口数目是否超过上限
if (nintf > USB_MAXINTERFACES)
{
dev_warn(ddev, "config %d has too many interfaces: %d, "
"using maximum allowed: %d\n",
cfgno, nintf, USB_MAXINTERFACES);
nintf = USB_MAXINTERFACES;
}
/* Go through the descriptors, checking their length and counting the
* number of altsettings for each interface */
//n用于保存接口数
n = 0;
//历遍接口
for ((buffer2 = buffer, size2 = size) ; size2 > 0 ; (buffer2 += header->bLength, size2 -= header->bLength))
{
if (size2 < sizeof(struct usb_descriptor_header))
{
dev_warn(ddev, "config %d descriptor has %d excess " "byte%s, ignoring\n",cfgno, size2, plural(size2));
break;
}
//将buffer2,也就是配置描述符的第10字节起格式化成描述符头结构保存在header中
header = (struct usb_descriptor_header *) buffer2;
//检测接口描述符的长度是否超过最大长度或过小
if ((header->bLength > size2) || (header->bLength < 2))
{
dev_warn(ddev, "config %d has an invalid descriptor " "of length %d, skipping remainder of the config\n",cfgno, header->bLength);
break;
}
//检测接口描述符的类型是否为接口
if (header->bDescriptorType == USB_DT_INTERFACE)
{
struct usb_interface_descriptor *d;
int inum;
//将header,也就是配置描述符的第10字节起格式化成接口描述符结构保存在d中
d = (struct usb_interface_descriptor *) header;
//检测接口描述符的长度是否过短
if (d->bLength < USB_DT_INTERFACE_SIZE)
{
dev_warn(ddev, "config %d has an invalid "
"interface descriptor of length %d, "
"skipping\n", cfgno, d->bLength);
continue;
}
//取得接口描述符的接口号
inum = d->bInterfaceNumber;
//接口描述符数目是否大于配置描述符中规定的数目
if (inum >= nintf_orig)
dev_warn(ddev, "config %d has an invalid "
"interface number: %d but max is %d\n",cfgno, inum, nintf_orig - 1);
/* Have we already encountered this interface?
* Count its altsettings */
//inums记录当前接口的接口号
//nalts记录接口号的重复次数
//历遍接口号数组
for (i = 0; i < n; ++i)
{
//检测接口号是否等于当前接口的接口号
if (inums[i] == inum)
break;
}
//i
if (i < n)
{
if (nalts[i] < 255)
++nalts[i];
}
//没有相同接口号,则在交互号数组中占一个对应接口号的位置
else if (n < USB_MAXINTERFACES)
{
inums[n] = inum;
nalts[n] = 1;
//接口数目计数器自加1
++n;
}
}
//检测接口描述符的类型是否为接口联合
else if (header->bDescriptorType == USB_DT_INTERFACE_ASSOCIATION)
{
if (iad_num == USB_MAXIADS)
{
dev_warn(ddev, "found more Interface "
"Association Descriptors "
"than allocated for in "
"configuration %d\n", cfgno);
}
else
{
config->intf_assoc[iad_num] =(struct usb_interface_assoc_descriptor *)header;
iad_num++;
}
}
//检测接口描述符的类型是否为设备或者配置
else if (header->bDescriptorType == USB_DT_DEVICE || header->bDescriptorType == USB_DT_CONFIG)
dev_warn(ddev, "config %d contains an unexpected "
"descriptor of type 0x%X, skipping\n",
cfgno, header->bDescriptorType);
} /* for ((buffer2 = buffer, size2 = size); ...) */
//计算除去配置描述符的长度
size = buffer2 - buffer;
//计算剩下的配置信息长度
config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0);
if (n != nintf)
dev_warn(ddev, "config %d has %d interface%s, different from "
"the descriptor's value: %d\n",
cfgno, n, plural(n), nintf_orig);
else if (n == 0)
dev_warn(ddev, "config %d has no interfaces?\n", cfgno);
//设置接口数
config->desc.bNumInterfaces = nintf = n;
/* Check for missing interface numbers */
//历遍接口
for (i = 0; i < nintf; ++i)
{
//历遍接口号数组
for (j = 0; j < nintf; ++j)
{
if (inums[j] == i)
break;
}
//检测是否有占用了接口号数组却没有接口号
if (j >= nintf)
dev_warn(ddev, "config %d has no interface number " "%d\n", cfgno, i);
}
/* Allocate the usb_interface_caches and altsetting arrays */
//历遍接口
for (i = 0; i < nintf; ++i)
{
//取得交互数
j = nalts[i];
//检测是否超过最大交互数
if (j > USB_MAXALTSETTING)
{
dev_warn(ddev, "too many alternate settings for "
"config %d interface %d: %d, "
"using maximum allowed: %d\n",
cfgno, inums[i], j, USB_MAXALTSETTING);
nalts[i] = j = USB_MAXALTSETTING;
}
//计算交互数组结构与接口结构一共需要的空间
len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
//分配接口结构
config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
if (!intfc)
return -ENOMEM;
kref_init(&intfc->ref);
}
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first interface descriptor */
//保存接口描述符起始位置到config中
config->extra = buffer;
//寻找下一个接口描述符,返回偏移量
i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,USB_DT_INTERFACE, &n);
//设置距离下一个接口描述符的偏移量
config->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",n, plural(n), "configuration");
//移动到下一个描述符的起始位置
buffer += i;
//计算描述符的剩余大小
size -= i;
/* Parse all the interface/altsetting descriptors */
while (size > 0)
{
//分析接口描述符
retval = usb_parse_interface(ddev, cfgno, config,buffer, size, inums, nalts);
if (retval < 0)
return retval;
//移动到下一个描述符的起始位置
buffer += retval;
//计算配置信息的剩余大小
size -= retval;
}
/* Check for missing altsettings */
//检测是否有缺失的交互配置
for (i = 0; i < nintf; ++i)
{
intfc = config->intf_cache[i];
for (j = 0; j < intfc->num_altsetting; ++j)
{
for (n = 0; n < intfc->num_altsetting; ++n)
{
if (intfc->altsetting[n].desc.bAlternateSetting == j)
break;
}
if (n >= intfc->num_altsetting)
dev_warn(ddev, "config %d interface %d has no ""altsetting %d\n", cfgno, inums[i], j);
}
}
return 0;
}
|
啥是交互?~
英文是Alternate,也就是接口描述符中的AlternateSetting,在usb规范中, 接口描述设备的功能,如果一个设备有数个功能,例如usb键盘上有个摄像头,这样就需要2个接口,一个描述键盘,一个描述摄像头,而AlternateSetting和InterfaceNumber的区别就是AlternateSetting是接口的集合,而InterfaceNumber是AlternateSetting的集合
find_next_descriptor用于寻找下一个指定的描述符,并返回偏移,可以指定任意2种类型,只想寻找1种指定类型的话,2个描述符的类型填写为相同就可以了
usb_parse_interface负责分析接口描述符
usb_parse_interface在/drivers/usb/core/config.c中
|
static int usb_parse_interface(struct device *ddev, int cfgno,
struct usb_host_config *config, unsigned char *buffer, int size,
u8 inums[], u8 nalts[])
{
unsigned char *buffer0 = buffer;
struct usb_interface_descriptor *d;
int inum, asnum;
struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
int i, n;
int len, retval;
int num_ep, num_ep_orig;
//按usb_interface_descriptor结构格式化buffer
d = (struct usb_interface_descriptor *) buffer;
//计算端点描述符的起始位置
buffer += d->bLength;
//计算减去接口描述符剩下的大小
size -= d->bLength;
if (d->bLength < USB_DT_INTERFACE_SIZE)
goto skip_to_next_interface_descriptor;
/* Which interface entry is this? */
intfc = NULL;
//取得接口号
inum = d->bInterfaceNumber;
//历遍接口号数组,寻找匹配的接口组结构
for (i = 0; i < config->desc.bNumInterfaces; ++i)
{
if (inums[i] == inum)
{
intfc = config->intf_cache[i];
break;
}
}
if (!intfc || intfc->num_altsetting >= nalts[i])
goto skip_to_next_interface_descriptor;
/* Check for duplicate altsetting entries */
//取得交互号
asnum = d->bAlternateSetting;
//历遍交互组结构,检测当前接口是否已经分析过
for ((i = 0, alt = &intfc->altsetting[0]) ; i < intfc->num_altsetting ; (++i, ++alt))
{
if (alt->desc.bAlternateSetting == asnum)
{
dev_warn(ddev, "Duplicate descriptor for config %d "
"interface %d altsetting %d, skipping\n",cfgno, inum, asnum);
goto skip_to_next_interface_descriptor;
}
}
//增加接口组结构中的交互计数器
++intfc->num_altsetting;
//拷贝接口描述符到接口组结构中
memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE);
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first endpoint or interface descriptor */
//保存当前描述符的起始位置到接口结构中
alt->extra = buffer;
//寻找下一个端点或者接口描述符
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,USB_DT_INTERFACE, &n);
//设置距离下一描述符的偏移
alt->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n", n, plural(n), "interface");
//移动到下一描述符的起始位置
buffer += i;
//计算配置信息的剩余大小
size -= i;
/* Allocate space for the right(?) number of endpoints */
//取得端点的数目
num_ep = num_ep_orig = alt->desc.bNumEndpoints;
//置端点数为0
alt->desc.bNumEndpoints = 0; /* Use as a counter */
//端点数大于最大值则设为最大值
if (num_ep > USB_MAXENDPOINTS) {
dev_warn(ddev, "too many endpoints for config %d interface %d "
"altsetting %d: %d, using maximum allowed: %d\n",
cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS);
num_ep = USB_MAXENDPOINTS;
}
//分配端点结构需要的空间
if (num_ep > 0)
{
/* Can't allocate 0 bytes */
len = sizeof(struct usb_host_endpoint) * num_ep;
alt->endpoint = kzalloc(len, GFP_KERNEL);
if (!alt->endpoint)
return -ENOMEM;
}
/* Parse all the endpoint descriptors */
//初始化端点数目计数器
n = 0;
while (size > 0)
{
//描述符为接口则跳过
if (((struct usb_descriptor_header *) buffer)->bDescriptorType == USB_DT_INTERFACE)
break;
//分析端点描述符
retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,num_ep, buffer, size);
if (retval < 0)
return retval;
++n;
//移动到下一个描述符
buffer += retval;
//计算剩余大小
size -= retval;
}
if (n != num_ep_orig)
dev_warn(ddev, "config %d interface %d altsetting %d has %d "
"endpoint descriptor%s, different from the interface "
"descriptor's value: %d\n",
cfgno, inum, asnum, n, plural(n), num_ep_orig);
return buffer - buffer0;
skip_to_next_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
USB_DT_INTERFACE, NULL);
return buffer - buffer0 + i;
}
|
usb_parse_endpoint的用途为分析端点描述符
usb_parse_endpoint在/drivers/usb/core/config.c中
|
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
int asnum, struct usb_host_interface *ifp, int num_ep,
unsigned char *buffer, int size)
{
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
struct usb_host_endpoint *endpoint;
int n, i, j;
//以端点描述符结构格式化buffer
d = (struct usb_endpoint_descriptor *) buffer;
//移动到端点描述符的尾部
buffer += d->bLength;
//计算描述符的剩余大小
size -= d->bLength;
//检测端点类型
if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
n = USB_DT_ENDPOINT_AUDIO_SIZE;
else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
n = USB_DT_ENDPOINT_SIZE;
else
{
dev_warn(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint descriptor of length %d, skipping\n",
cfgno, inum, asnum, d->bLength);
goto skip_to_next_endpoint_or_interface_descriptor;
}
//取得端点号
i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
//端点号不在1-16中则分析下一个
if (i >= 16 || i == 0)
{
dev_warn(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum, d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
}
/* Only store as many endpoints as we have room for */
if (ifp->desc.bNumEndpoints >= num_ep)
goto skip_to_next_endpoint_or_interface_descriptor;
//获得接口结构中相应的端点结构的地址
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
//增加端点计数器数
++ifp->desc.bNumEndpoints;
//拷贝端点描述符信息到端点结构中
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
/* Fix up bInterval values outside the legal range. Use 32 ms if no
* proper value can be guessed. */
i = 0; /* i = min, j = max, n = default */
j = 255;
//测试端点的传输类型是否为中断
if (usb_endpoint_xfer_int(d))
{
i = 1;
//判断设备的速度类型
switch (to_usb_device(ddev)->speed)
{
case USB_SPEED_HIGH:
/* Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
* descriptors. Try to fix those and fall back to a
* 32 ms default value otherwise. */
n = fls(d->bInterval*8);
if (n == 0)
n = 9; /* 32 ms = 2^(9-1) uframes */
j = 16;
break;
default: /* USB_SPEED_FULL or _LOW */
/* For low-speed, 10 ms is the official minimum.
* But some "overclocked" devices might want faster
* polling so we'll allow it. */
n = 32;
break;
}
}
//传输类型为等时
else if (usb_endpoint_xfer_isoc(d))
{
i = 1;
j = 16;
switch (to_usb_device(ddev)->speed)
{
case USB_SPEED_HIGH:
n = 9; /* 32 ms = 2^(9-1) uframes */
break;
default: /* USB_SPEED_FULL */
n = 6; /* 32 ms = 2^(6-1) frames */
break;
}
}
if (d->bInterval < i || d->bInterval > j)
{
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X has an invalid bInterval %d, "
"changing to %d\n",
cfgno, inum, asnum,
d->bEndpointAddress, d->bInterval, n);
endpoint->desc.bInterval = n;
}
/* Some buggy low-speed devices have Bulk endpoints, which is
* explicitly forbidden by the USB spec. In an attempt to make
* them usable, we will try treating them as Interrupt endpoints.
*/
//设备为低速设备并且该端点的传输类型为块传输
if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&usb_endpoint_xfer_bulk(d))
{
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X is Bulk; changing to Interrupt\n",
cfgno, inum, asnum, d->bEndpointAddress);
//设置端点的传输类型为中断
endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
endpoint->desc.bInterval = 1;
//最大包的值大于8则设为8
if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8)
endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
}
/*
* Some buggy high speed devices have bulk endpoints using
* maxpacket sizes other than 512. High speed HCDs may not
* be able to handle that particular bug, so let's warn...
*/
//设备为高速设备并且该端点的传输类型为块传输
if (to_usb_device(ddev)->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d))
{
unsigned maxp;
maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize) & 0x07ff;
if (maxp != 512)
dev_warn(ddev, "config %d interface %d altsetting %d "
"bulk endpoint 0x%X has invalid maxpacket %d\n",
cfgno, inum, asnum, d->bEndpointAddress,
maxp);
}
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the next endpoint or interface descriptor */
//保存端点描述符的尾部到端点结构中
endpoint->extra = buffer;
//寻找下一个接口或者端点描述符
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,USB_DT_INTERFACE, &n);
//取得距离下一个描述符的偏移
endpoint->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",n, plural(n), "endpoint");
return buffer - buffer0 + i;
skip_to_next_endpoint_or_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
USB_DT_INTERFACE, NULL);
return buffer - buffer0 + i;
}
|
终于分析完配置信息了.........
现在主机控制器的数据结构如下
精简了一些数据没有画出来,因为全部画出来需要的空间太大了 Orz
阅读(2131) | 评论(0) | 转发(0) |
