Chinaunix首页 | 论坛 | 博客
  • 博客访问: 196082
  • 博文数量: 19
  • 博客积分: 1422
  • 博客等级: 上尉
  • 技术积分: 235
  • 用 户 组: 普通用户
  • 注册时间: 2007-11-04 17:46
文章分类

全部博文(19)

文章存档

2011年(1)

2009年(2)

2008年(9)

2007年(7)

我的朋友

分类: C/C++

2008-03-20 21:35:57

CDT规约中CRC算法使用8位CRC校验,下面是从资料中看到关于生成CRC余式表的算法,8位的数只可能有256种,每一个数对应余式求出后,就可以用于查找法算CRC校验码。

//生成CDT的CRC余式表

#include <stdio.h>

unsigned char GetCode(int c)
{
    int i;
    c = (unsigned char)c;
    for(i=0; i<8; i++)
    {
        if( (c&0x80)!=0)
        {
            c <<= 1;
            c ^= 0x07;
        }
        else
            c <<= 1;
    }
    return c;
}

int main(int argc, char** argv)
{
    int i;
    unsigned char c;
    printf("unsigned char BCH_TAB[256]={\n");
    for(i=0; i<256; i++)
    {
        c = GetCode(i);
        printf("0x%02X", c);
        if(i==255)
            printf("\n}\n");
        else
            printf(", ");
        if( 0==((i+1)%8) )
            printf("\n");
    }
    return 0;
}


输出内容如下:

unsigned char BCH_TAB[256]={
0x00, 0x07, 0x0E, 0x09, 0x1C, 0x1B, 0x12, 0x15,
0x38, 0x3F, 0x36, 0x31, 0x24, 0x23, 0x2A, 0x2D,
0x70, 0x77, 0x7E, 0x79, 0x6C, 0x6B, 0x62, 0x65,
0x48, 0x4F, 0x46, 0x41, 0x54, 0x53, 0x5A, 0x5D,
0xE0, 0xE7, 0xEE, 0xE9, 0xFC, 0xFB, 0xF2, 0xF5,
0xD8, 0xDF, 0xD6, 0xD1, 0xC4, 0xC3, 0xCA, 0xCD,
0x90, 0x97, 0x9E, 0x99, 0x8C, 0x8B, 0x82, 0x85,
0xA8, 0xAF, 0xA6, 0xA1, 0xB4, 0xB3, 0xBA, 0xBD,
0xC7, 0xC0, 0xC9, 0xCE, 0xDB, 0xDC, 0xD5, 0xD2,
0xFF, 0xF8, 0xF1, 0xF6, 0xE3, 0xE4, 0xED, 0xEA,
0xB7, 0xB0, 0xB9, 0xBE, 0xAB, 0xAC, 0xA5, 0xA2,
0x8F, 0x88, 0x81, 0x86, 0x93, 0x94, 0x9D, 0x9A,
0x27, 0x20, 0x29, 0x2E, 0x3B, 0x3C, 0x35, 0x32,
0x1F, 0x18, 0x11, 0x16, 0x03, 0x04, 0x0D, 0x0A,
0x57, 0x50, 0x59, 0x5E, 0x4B, 0x4C, 0x45, 0x42,
0x6F, 0x68, 0x61, 0x66, 0x73, 0x74, 0x7D, 0x7A,
0x89, 0x8E, 0x87, 0x80, 0x95, 0x92, 0x9B, 0x9C,
0xB1, 0xB6, 0xBF, 0xB8, 0xAD, 0xAA, 0xA3, 0xA4,
0xF9, 0xFE, 0xF7, 0xF0, 0xE5, 0xE2, 0xEB, 0xEC,
0xC1, 0xC6, 0xCF, 0xC8, 0xDD, 0xDA, 0xD3, 0xD4,
0x69, 0x6E, 0x67, 0x60, 0x75, 0x72, 0x7B, 0x7C,
0x51, 0x56, 0x5F, 0x58, 0x4D, 0x4A, 0x43, 0x44,
0x19, 0x1E, 0x17, 0x10, 0x05, 0x02, 0x0B, 0x0C,
0x21, 0x26, 0x2F, 0x28, 0x3D, 0x3A, 0x33, 0x34,
0x4E, 0x49, 0x40, 0x47, 0x52, 0x55, 0x5C, 0x5B,
0x76, 0x71, 0x78, 0x7F, 0x6A, 0x6D, 0x64, 0x63,
0x3E, 0x39, 0x30, 0x37, 0x22, 0x25, 0x2C, 0x2B,
0x06, 0x01, 0x08, 0x0F, 0x1A, 0x1D, 0x14, 0x13,
0xAE, 0xA9, 0xA0, 0xA7, 0xB2, 0xB5, 0xBC, 0xBB,
0x96, 0x91, 0x98, 0x9F, 0x8A, 0x8D, 0x84, 0x83,
0xDE, 0xD9, 0xD0, 0xD7, 0xC2, 0xC5, 0xCC, 0xCB,
0xE6, 0xE1, 0xE8, 0xEF, 0xFA, 0xFD, 0xF4, 0xF3
}

阅读(4263) | 评论(1) | 转发(0) |
给主人留下些什么吧!~~

chinaunix网友2008-07-17 11:04:24

比较好 我顶