我的u-boot 日志3

我的u-boot 日志3
===================================================================================
author    : chjianash
date      : 2009-05-19
functions : 1. load file from CF into memory,
            2. load file into default memory address
            3. boot linux kernel
===================================================================================
U-Boot 1.1.1 (Development build, svnversion: u-boot:36973, exec:36970) (Build time: Sep 17 2008 - 11:16:48)

CN3010_EVB_HS5 board revision major:2, minor:2, serial #: 2008-2.2-00562
OCTEON CN5020-SCP pass 1.1, Core clock: 700 MHz, DDR clock: 265 MHz (530 Mhz data rate)
DRAM:  512 MB
Flash:  8 MB
Clearing DRAM....... done
BIST check passed.
Starting PCI
PCI Status: PCI 32-bit
PCI BAR 0: 0x00000000, PCI BAR 1: Memory 0x00000000  PCI 0xf8000000
Net:   octeth0, octeth1
 Bus 0 (CF Card): OK

  ide 0: Model: CF 1GB Firm: 20071116 Ser#: TSS20035080507103404
            Type: Removable Hard Disk
            Capacity: 967.6 MB = 0.9 GB (1981728 x 512)
Octeon cn3010_evb_hs5#
Octeon cn3010_evb_hs5#
Octeon cn3010_evb_hs5#
Octeon cn3010_evb_hs5# fatls ide 0
  1048576   random.bin
       45   random.md5sum
   318432   u-boot-octeon_cn3010_evb_hs5.bin
 83940318   vmlinux.64

4 file(s), 0 dir(s)

Octeon cn3010_evb_hs5# fatload ide 0 0 vmlinux.64
reading vmlinux.64

83940318 bytes read
Octeon cn3010_evb_hs5# bootoct 0
Bootloader: Booting Octeon Executive application at 0x09f00000, core mask: 0x1, stack size: 0x100000, heap size: 0x300000
ERROR CREATING TLB MAPPING (read only)
ERROR: Unable to properly load application
Octeon cn3010_evb_hs5# bootoctlinux  0x9f00000
ELF file is 64 bit
Attempting to allocate memory for ELF segment: addr: 0xffffffff80100000 (adjusted to: 0x0000000000100000), size 0x15dfb20
Allocated memory for ELF segment: addr: 0xffffffff80100000, size 0x15dfb20
Loading .text @ 0xffffffff80100000 (0x43550c bytes)
Loading __ex_table @ 0xffffffff80535510 (0x7170 bytes)
Loading .rodata @ 0xffffffff8053d000 (0x2fcf04 bytes)
Loading .pci_fixup @ 0xffffffff80839f08 (0xbe0 bytes)
Loading __ksymtab @ 0xffffffff8083aae8 (0xa1f0 bytes)
Loading __ksymtab_gpl @ 0xffffffff80844cd8 (0x2c40 bytes)
Loading __ksymtab_gpl_future @ 0xffffffff80847918 (0x30 bytes)
Loading __ksymtab_strings @ 0xffffffff80847948 (0x10bd8 bytes)
Loading __param @ 0xffffffff80858520 (0x1bf8 bytes)
Loading .data @ 0xffffffff8085c000 (0x418e0 bytes)
Loading .data.cacheline_aligned @ 0xffffffff8089e000 (0x8b80 bytes)
Loading .init.text @ 0xffffffff808a7000 (0x32220 bytes)
Loading .init.data @ 0xffffffff808d9220 (0x6190 bytes)
Loading .init.setup @ 0xffffffff808df3b0 (0x6d8 bytes)
Loading .initcall.init @ 0xffffffff808dfa88 (0x5d0 bytes)
Loading .con_initcall.init @ 0xffffffff808e0058 (0x18 bytes)
Loading .exit.text @ 0xffffffff808e0070 (0x20e8 bytes)
Loading .init.ramfs @ 0xffffffff808e3000 (0xd6e8a3 bytes)
Loading .data.percpu @ 0xffffffff81651900 (0x36c8 bytes)
Clearing .bss @ 0xffffffff81656000 (0x443d0 bytes)
Clearing .cvmx_shared_bss @ 0xffffffff8169a3d0 (0x348 bytes)
## Loading Linux kernel with entry point: 0xffffffff808a7000 ...
Bootloader: Done loading app on coremask: 0x1
Linux version 2.6.21.7-Cavium-Octeon (cjash@chjianash) (gcc version 4.1.2 (Cavium Networks Version: 1_8_1, build 72)) #3 SMP Mon May 18 17:00:9
CVMSEG size: 2 cache lines (256 bytes)
CPU revision is: 000d0601
Determined physical RAM map:
 memory: 000000000e800000 @ 0000000001700000 (usable)
 memory: 0000000010000000 @ 0000000410000000 (usable)
Wasting 329728 bytes for tracking 5888 unused pages
Initrd not found or empty - disabling initrd
Built 1 zonelists.  Total pages: 65792
Kernel command line:  console=ttyS0,115200
Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
Synthesized TLB refill handler (55 instructions).
Synthesized TLB load handler fastpath (72 instructions).
Synthesized TLB store handler fastpath (75 instructions).
Synthesized TLB modify handler fastpath (72 instructions).
PID hash table entries: 2048 (order: 11, 16384 bytes)
Using 700.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 491172k/499712k available (4309k kernel code, 8188k reserved, 3525k data, 14008k init, 0k highmem)
Calibrating delay using timer specific routine.. 1400.47 BogoMIPS (lpj=2800949)
Mount-cache hash table entries: 256
Checking for the multiply/shift bug... no.
Checking for the daddi bug... no.
Checking for the daddiu bug... no.
Brought up 1 CPUs
NET: Registered protocol family 16
Enabling Octeon big bar support
PCI Status: PCI 32-bit
PCI Clock: 66 MHz
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 393216 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
/proc/octeon_perf: Octeon performace counter interface loaded
Octeon watchdog driver loaded with a timeout of 6135 ms.
Total HugeTLB memory allocated, 0
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler cfq registered (default)
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 1 RAM disks of 500000K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SAS Host driver 3.04.04
slram: not enough parameters.
usbmon: debugfs is not available
USB Universal Host Controller Interface driver v3.0
dwc_otg: version 2.40a 10-APR-2006
DWC_otg: Using DMA mode
dwc_otg dwc_otg.0: DWC OTG Controller
dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
dwc_otg dwc_otg.0: irq 64, io mem 0x00000000
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
ds1307 0-0068: rtc core: registered ds1307 as rtc0
oprofile: using mips/octeon performance monitoring.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
serial8250: ttyS0 at MMIO 0x1180000000800 (irq = 42) is a 16550A
Bootbus flash: Setting flash for 8MB flash at 0x1f400000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cf: Octeon bootbus compact flash driver version 2.0
cf: Compact flash found in bootbus region 3 (16 bit).
cf: CF 1GB Serial TSS20035080507103404 (1981728 sectors, 512 bytes/sector)
 cfa: cfa1
Freeing unused kernel memory: 14008k freed
/sbin/rc starting
Updating module dependencies
Loading IPv6 module
NET: Registered protocol family 10
Mounting file systems
Setting up loopback
Starting syslogd
Jan  1 00:00:04 (none) syslog.info syslogd started: BusyBox v1.2.1
Starting teln

BusyBox v1.2.1 (2009.05.18-08:20+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # Jan  1 00:00:04 (none) daemon.info init: Starting pid 741, console /dev/ttyS0: '/bin/sh'

~ #