全部博文（75）
分类： LINUX
2009-06-10 20:45:21
For embedded users, the most important new feature is certainly the inclusion of Squashfs, a read-only compressed filesystem. This filesystem is very well-suited to store the immutable parts of an embedded system (applications, libraries, static data, etc.), and replaces the old cramfs filesystem which had some strong limitations (file size, filesystem size and limited compression).
Squashfs is a block filesystem, but since it is read-only, you can also use it on flash partitions, through the mtdblock driver. It’s fine as you just write the filesystem image once. Don’t hesitate to try it to get the best performance out of your flash partitions. Ideally, you should even use it on top of , which would transparently allow the read-only parts of your filesystem to participate to wear-leveling. See our presentation for details.
This new release also adds support, at least for scsi probes and libata port scan. This is a step forward to reducing boot time, which is often critical in embedded systems.
2.6.29 also allows stripping of generated symbols under CONFIG_KALLSYMS_ALL, saving up to 200 KB for kernels built with this feature. This is nice for embedded systems with very little RAM, which still need this feature during development.
Another new feature of this kernel is the support for the Samsung S3C64XX CPUs. Of course, a lot of new boards and devices are supported, such as the framebuffer of the i.MX 31 CPU, or the SMSC LAN911x and LAN912x Ethernet controllers.
The other major features of this new kernel, not necessarily interesting for embedded systems are the inclusion of the btrfs filesystem, the inclusion of the kernel modesetting code, support for WiMAX, scalability improvements (support of 4096 CPUs!), filesystem freezing capability, filesystem improvements and many new drivers.
For more details on the 2.6.29 improvements, the best resource is certainly the written by the community.
