如何拆解HP Pavilion DV1000的键盘按键

[float=left]How to Replace a Keyboard Key on a HP Pavilion DV1000 [p=30, 2, left]A guide to repairing your laptop or notebook's keyboard [/p][/float]
[float=left][p=30, 2, left]Last updated April 29th, 2008 [/p][/float]



恕我就不翻译过来了，等下一起整合到DV1000拆解图列中去。

Yes, it is possible to replace individual keys on your laptop's keyboard! Note that the same laptop model can have several different types of hinge mechanisms under the key. Some colors in the pictures may differ for your model. That is fine, what matters most is the shape of the hinge piece. [p=30, 2, left]Step 1: Orient the hinge
The plastic hinge mechanism must be oriented as shown for it to fit onto the metal keyboard hooks. .
[/p][p=30, 2, left]Step 2: Hook the hinge onto the base
Hook the bottom edge of the hinge over the bottom two metal hooks on the base of the keyboard.
[/p][p=30, 2, left]Step 3: Secure the hinge into place
Snap the top of the hinge into place, one side at a time. This may take a bit of pressure. In this example, the top right side is being secured first. The top right and left sides of the plastic hinge should be clipped between the two metal notches protruding from the base of the keyboard on each side. You can now check that the hinge works by flexing it up and down; it should pivot easily at it's axis.
[/p][p=30, 2, left]Step 4: Place the rubber spring piece
If your keyboard is missing the rubber spring piece, place it in the center of the hinge. It will be held in place by the surrounding key and hinge.
[/p][p=30, 2, left]Step 5: Press the key into place
Align the key on top of its place on the keyboard, and press down evenly. All four corners of the key should click into place.
[/p]
[p=30, 2, left]DV1000的内部构造图看这里：