安装：
[root@ns138:/opt/upload]# rpm -ivh VMware-server-2.0.2-203138.i386.rpm
Preparing... ########################################### [100%]
1:VMware-server ########################################### [100%]
The installation of VMware Server 2.0.2 for Linux completed successfully.
You can decide to remove this software from your system at any time by
invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to
configure it for your running kernel by invoking the
following command: "/usr/bin/vmware-config.pl".
Enjoy,
--the VMware team
#
[root@ns138:/opt/upload]# vmware-config.pl
......
solution, please apply now at
Do you accept? (yes/no) yes
Thank you.
The bld-2.6.18-8.el5-i686smp-RHEL5 - vmmon module loads perfectly into the
running kernel.
The bld-2.6.18-8.el5-i686smp-RHEL5 - vmci module loads perfectly into the
running kernel.
The bld-2.6.18-8.el5-i686smp-RHEL5 - vsock module loads perfectly into the
running kernel.
Do you want networking for your virtual machines? (yes/no/help) [yes]
Configuring a bridged network for vmnet0.
Please specify a name for this network.
[Bridged]
The following bridged networks have been defined:
. vmnet0 is bridged to eth0
All your ethernet interfaces are already bridged.
Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]
Configuring a NAT network for vmnet8.
Please specify a name for this network. [NAT]
Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]
Probing for an unused private subnet (this can take some time)...
The subnet 192.168.240.0/255.255.255.0 appears to be unused.
This system appears to have a DHCP server configured for normal use. Beware
that you should teach it how not to interfere with VMware Server's DHCP server.
There are two ways to do this:
1) Modify the file /etc/dhcpd.conf to add something like:
subnet 192.168.240.0 netmask 255.255.255.0 {
# Note: No range is given, vmnet-dhcpd will deal with this subnet.
}
2) Start your DHCP server with an explicit list of network interfaces to deal
with (leaving out vmnet8). e.g.:
dhcpd eth0
Consult the dhcpd(8) and dhcpd.conf(5) manual pages for details.
Hit enter to continue.
The following NAT networks have been defined:
. vmnet8 is a NAT network on private subnet 192.168.240.0.
Do you wish to configure another NAT network? (yes/no) [no]
Do you want to be able to use host-only networking in your virtual machines?
[yes]
Configuring a host-only network for vmnet1.
Please specify a name for this network.
[HostOnly]
Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]
Probing for an unused private subnet (this can take some time)...
The subnet 192.168.220.0/255.255.255.0 appears to be unused.
This system appears to have a DHCP server configured for normal use. Beware
that you should teach it how not to interfere with VMware Server's DHCP server.
There are two ways to do this:
1) Modify the file /etc/dhcpd.conf to add something like:
subnet 192.168.220.0 netmask 255.255.255.0 {
# Note: No range is given, vmnet-dhcpd will deal with this subnet.
}
2) Start your DHCP server with an explicit list of network interfaces to deal
with (leaving out vmnet1). e.g.:
dhcpd eth0
Consult the dhcpd(8) and dhcpd.conf(5) manual pages for details.
Hit enter to continue.
The following host-only networks have been defined:
. vmnet1 is a host-only network on private subnet 192.168.220.0.
Do you wish to configure another host-only network? (yes/no) [no]
The bld-2.6.18-8.el5-i686smp-RHEL5 - vmnet module loads perfectly into the
running kernel.
Please specify a port for remote connections to use [902] 904
WARNING: VMware Server has been configured to run on a port different from the
default port. Please make sure to use this port when installing remote clients
on other machines.
Do you want this program to set up permissions for your registered virtual
machines? This will be done by setting new permissions on all files found in
the "/etc/vmware/vm-list" file. [no] yes
Please specify a port for standard http connections to use [8222]
Please specify a port for secure http (https) connections to use [8333]
The current administrative user for VMware Server is ''. Would you like to
specify a different administrator? [no]
Using root as the VMware Server administrator.
In which directory do you want to keep your virtual machine files?
[/var/lib/vmware/Virtual Machines] /opt/vmware
Do you want to enter a serial number now? (yes/no/help) [no] yes
Please enter your 20-character serial number.
Type XXXXX-XXXXX-XXXXX-XXXXX or 'Enter' to cancel: 92TA1-YR664-2F7G7-4TN98
Creating a new VMware VIX API installer database using the tar4 format.
Installing VMware VIX API.
In which directory do you want to install the VMware VIX API binary files?
[/usr/bin]
In which directory do you want to install the VMware VIX API library files?
[/usr/lib/vmware-vix/lib]
The path "/usr/lib/vmware-vix/lib" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the VMware VIX API document pages?
[/usr/share/doc/vmware-vix]
The path "/usr/share/doc/vmware-vix" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
The installation of VMware VIX API 1.6.2 build-203138 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-vix.pl".
Enjoy,
--the VMware team
Starting VMware services:
Virtual machine monitor [ OK ]
Virtual machine communication interface [ OK ]
VM communication interface socket family: [ OK ]
Virtual ethernet [ OK ]
Bridged networking on /dev/vmnet0 [ OK ]
Host-only networking on /dev/vmnet1 (background) [ OK ]
DHCP server on /dev/vmnet1 [ OK ]
Host-only networking on /dev/vmnet8 (background) [ OK ]
DHCP server on /dev/vmnet8 [ OK ]
NAT service on /dev/vmnet8 [ OK ]
VMware Server Authentication Daemon (background) [ OK ]
Shared Memory Available [ OK ]
Starting VMware management services:
VMware Server Host Agent (background) [ OK ]
VMware Virtual Infrastructure Web Access
Starting VMware autostart virtual machines:
Virtual machines [ OK ]
The configuration of VMware Server 2.0.2 build-203138 for Linux for this
running kernel completed successfully.
SN： http://blog.chinaunix.net/u/28922/showart_526813.html
使用：
