Chinaunix首页 | 论坛 | 博客
  • 博客访问: 3255712
  • 博文数量: 815
  • 博客积分: 12898
  • 博客等级: 上将
  • 技术积分: 7883
  • 用 户 组: 普通用户
  • 注册时间: 2006-12-25 09:57
文章分类

全部博文(815)

文章存档

2014年(1)

2011年(46)

2010年(192)

2009年(121)

2008年(70)

2007年(385)

分类: LINUX

2009-02-22 20:16:41

# Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection
#
[root@atyu30 ~]# uname -a
Linux atyu30 2.6.18-92.el5 #1 SMP Tue Apr 29 13:16:12 EDT 2008 i686 i686 i386 GNU/Linux
[root@atyu30 ~]# rpm -ivh iwl4965-firmware-4.44.17-1.i386.rpm
[root@atyu30 ~]ln -s /lib/firmware/iwlwifi-4965.ucode         /lib/firmware/iwlwifi-4965-1.ucode
[root@atyu30 ~]# dmesg
Linux version 2.6.18-92.el5 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Tue Apr 29 13:16:12 EDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable)
 BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data)
 BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS)
 BIOS-e820: 000000007d700000 - 000000007e000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1110MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6980
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 513712
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 284336 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP (v002 LENOVO                                ) @ 0x000f6950
ACPI: XSDT (v001 LENOVO TP-7N    0x00002160  LTP 0x00000000) @ 0x7d6bd5f8
ACPI: FADT (v003 LENOVO TP-7N    0x00002160 LNVO 0x00000001) @ 0x7d6bd700
ACPI: SSDT (v001 LENOVO TP-7N    0x00002160 MSFT 0x03000000) @ 0x7d6bd8b4
ACPI: ECDT (v001 LENOVO TP-7N    0x00002160 LNVO 0x00000001) @ 0x7d6cbcf3
ACPI: TCPA (v002 LENOVO TP-7N    0x00002160 LNVO 0x00000001) @ 0x7d6cbd45
ACPI: MADT (v001 LENOVO TP-7N    0x00002160 LNVO 0x00000001) @ 0x7d6cbd77
ACPI: MCFG (v001 LENOVO TP-7N    0x00002160 LNVO 0x00000001) @ 0x7d6cbddf
ACPI: HPET (v001 LENOVO TP-7N    0x00002160 LNVO 0x00000001) @ 0x7d6cbe1b
ACPI: BOOT (v001 LENOVO TP-7N    0x00002160  LTP 0x00000001) @ 0x7d6cbf66
ACPI: ASF! (v016 LENOVO TP-7N    0x00002160 PTL  0x00000001) @ 0x7d6cbf8e
ACPI: SSDT (v001 LENOVO TP-7N    0x00002160 INTL 0x20050513) @ 0x7d6e271b
ACPI: SSDT (v001 LENOVO TP-7N    0x00002160 INTL 0x20050513) @ 0x7d6e297a
ACPI: SSDT (v001 LENOVO TP-7N    0x00002160 INTL 0x20050513) @ 0x7d6e2a20
ACPI: SSDT (v001 LENOVO TP-7N    0x00002160 INTL 0x20050513) @ 0x7d6e2f17
ACPI: DSDT (v001 LENOVO TP-7N    0x00002160 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
Detected 2394.152 MHz processor.
Built 1 zonelists.  Total pages: 513712
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c074b000 soft=c072b000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2030252k/2054848k available (2095k kernel code, 23400k reserved, 874k data, 228k init, 1137344k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 4792.63 BogoMIPS (lpj=2396318)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00010000 0008e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00010000 0008e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00010940 0008e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c074c000 soft=c072c000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.97 BogoMIPS (lpj=2393986)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00010000 0008e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00010000 0008e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00010940 0008e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
Total of 2 processors activated (9580.60 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs:
CPU#0 had -259 usecs TSC skew, fixed it up.
CPU#1 had 259 usecs TSC skew, fixed it up.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
migration_cost=25
checking if image is initramfs... it is
Freeing initrd memory: 2398k freed
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Is dependent on dock

ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
Setting up standard PCI resources
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 18) interrupt mode.
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: f4000000-f5ffffff
  PREFETCH window: f8500000-f85fffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-3fff
  MEM window: f6000000-f7ffffff
  PREFETCH window: f8600000-f86fffff
PCI: Bus 6, cardbus bridge: 0000:05:00.0
  IO window: 00004000-000040ff
  IO window: 00004400-000044ff
  PREFETCH window: d8000000-d9ffffff
  MEM window: d4000000-d5ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 4000-7fff
  MEM window: d4000000-d7efffff
  PREFETCH window: d8000000-dbffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 185
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1235332641.687:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 95BAC6CB8E096352
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (32 C)
ACPI: Thermal Zone [THM1] (27 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 185
ICH8M: chipset revision 3
ICH8M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x18e0-0x18e7, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:05:00.0 [17aa:20c6]
Yenta: ISA IRQ mask 0x04b8, PCI irq 185
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7efffff
pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdbffffff
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 393k
Time: tsc clocksource has been installed.
Time: hpet clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 217, io mem 0xf8426c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0xf8427000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 169, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input1
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 177, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 185, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 233, io base 0x000018c0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 185
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports
ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426200 irq 50
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
  Vendor: ATA       Model: WDC WD1600BEVS-0  Rev: 08.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1235332657.575:2): selinux=0 auid=4294967295 ses=4294967295
compat: module license 'unspecified' taints kernel.
input: PC Speaker as /class/input/input2
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:05:00.2 [1180:0822] (rev 21)
ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:05:00.2 to 64
mmc0: SDHCI at 0xd7efe400 irq 58 DMA
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:19.0 to 64
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.22ks
iwl4965: Copyright(c) 2003-2007 Intel Corporation
pci0000:00: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:72:98:c2:b9
pci0000:00: eth0: Intel(R) PRO/1000 Network Connection
pci0000:00: eth0: MAC: 4, PHY: 6, PBA No: 1008ff-0ff
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 74
sd 0:0:0:0: Attached scsi generic sg0 type 0
iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1b.0 to 64
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: IBM ThinkPad ACPI Extras v0.13-rh
ibm_acpi:
ibm_acpi: ThinkPad EC firmware 7MHT25WW-1.03
ibm_acpi: bay device not present
ibm_acpi: disabling subdriver bay
input: Video Bus as /class/input/input3
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
input: Video Bus as /class/input/input4
ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2048248k swap on /dev/sda6.  Priority:-1 extents:1 across:2048248k
IA-32 Microcode Update Driver: v1.14a
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
ADDRCONF(NETDEV_UP): eth0: link is not ready
pci0000:00: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
pci0000:00: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
/dev/vmmon[6691]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6691]: Module vmmon: initialized
/dev/vmnet: open called by PID 6725 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 6739 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
/dev/vmnet: open called by PID 7078 (vmnet-netifup)
/dev/vmnet: open called by PID 7077 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 7149 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 7150 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
[drm] Initialized i915 1.8.0 20060929 on minor 0
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
eth0: no IPv6 routers present
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: PIXART USB OPTICAL MOUSE as /class/input/input5
input: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1
pci0000:00: eth0: Link is Down
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:21:27:1b:f7:16
wlan0: RX authentication from 00:21:27:1b:f7:16 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:21:27:1b:f7:16
wlan0: RX AssocResp from 00:21:27:1b:f7:16 (capab=0x421 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:21:27:1b:f7:16)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
bridge-eth0: disabling the bridge
bridge-eth0: down
ADDRCONF(NETDEV_UP): eth0: link is not ready
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: disabling the bridge
bridge-eth0: down
wlan0: deauthenticate(reason=3)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:21:27:1b:f7:16
wlan0: RX authentication from 00:21:27:1b:f7:16 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:21:27:1b:f7:16
wlan0: RX AssocResp from 00:21:27:1b:f7:16 (capab=0x421 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:21:27:1b:f7:16)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: CTS protection enabled (BSSID=00:21:27:1b:f7:16)
/dev/vmnet: open called by PID 9513 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[9523]: host clock rate change request 0 -> 19
wlan0: CTS protection disabled (BSSID=00:21:27:1b:f7:16)
/dev/vmmon[9523]: host clock rate change request 19 -> 0
/dev/vmmon[9523]: host clock rate change request 0 -> 100
/dev/vmnet: open called by PID 9523 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[9523]: host clock rate change request 100 -> 228

[root@atyu30 ~]# ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2976 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2976 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4417196 (4.2 MiB)  TX bytes:4417196 (4.2 MiB)
wlan0     Link encap:Ethernet  HWaddr 00:29:5C:6C:23:D8 
          inet addr:192.168.1.107  Bcast:255.255.255.255  Mask:255.255.255.0
          inet6 addr: fe80::221:5cff:fe6c:13d7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2045 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2302 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1768263 (1.6 MiB)  TX bytes:366252 (357.6 KiB)

wmaster0  Link encap:UNSPEC  HWaddr 00-22-5C-6C-13-D7-96-78-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)


[root@atyu30 ~]# ping atyu30.cublog.cn
PING atyu30.cublog.cn (60.28.166.87) 56(84) bytes of data.
64 bytes from 60.28.166.87: icmp_seq=1 ttl=53 time=63.2 ms
64 bytes from 60.28.166.87: icmp_seq=2 ttl=53 time=64.4 ms

--- atyu30.cublog.cn ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 63.269/63.864/64.460/0.646 ms
[root@atyu30 ~]#


阅读(3019) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~