一个正常配置下的ADSL
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
interface Ethernet0/0
no ip address
full-duplex
pppoe enable
pppoe-client dial-pool-number 1
!
interface Ethernet0
/1
ip address 10.0.0.254 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
full-duplex
no cdp enable
!
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 2
no cdp enable
ppp authentication pap callin
ppp pap sent-username fmapdof password 0 f535120
!
ip nat inside source list 1 interface Dialer1 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1 permanent
!
access-list 1 permit any
dialer-list 2 protocol ip permit
=================
需要注意的就是 ip tcp adjust-mss 1452 调整tcp最大分段大小以满足PPPOE下的MTU
因为pppoe下 实际的数据段只能为1500-8(ppp的头)=1492,1492再减去TCP和IP头各20等于1452,也就是说为了避免2层上不停的分割数据包,适应某些应用如MSN,同时加快传输.
阅读(1332) | 评论(0) | 转发(0) |
