硬盘安装OpenBSD3.6(转)

硬盘安装OpenBSD3.6

硬盘安装NetBSD:

自从有了硬盘安装NetBSD2/3的经验后,安装OpenBSD可以讲是手到拿来.


硬件:40G硬盘,1G内存,USB外挂光驱.
系统:Windows XP,10G FAT32;FreeBSD,15G,其余均为自由空间.

安装步骤:

1.在C盘下建目录C:\OpenBSD3.6\i386,注意该目录的大小写,并从官方站点上把i386下的所有文件下载到C:\OpenBSD3.6\i386下.

2.重新启动计算机,进入Grub for DOS(如没有请先安装),按"c"进入GRUB命令模式.

CODE:

grub>

3.输入下面命令,启动OpenBSD安装程序.

CODE:

grub>map (hd0,0)/OpenBSD3.6/i386/cdrom36.fs (fd0)
grub>chainloader (hd0,0)/OpenBSD/i386/cdrom36.fs
grub>rootnoverify (fd0)
grub>boot

4.到此已成功进入OpenBSD的安装界面.

CODE:

erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell?

5.按"i"进行安装.

CODE:

Terminal type? [vt220]        回车

Do you wish to select a keyboard encoding table? [no]        回车

Proceed with install? [no]        yes

Which one is the root disk? (or 'done') [wd0]        回车

Do you want to use *all* of wd0 for OpenBSD? [no]        回车

6.分区

CODE:

Disk wd0        geometry 4864/255/63 [78140160 Sectors]
Offset 0        Signature 0xAA55
          Starting            Ending                      LBA Info
# id          C    H    S -     C    H    S  [                start                 size        ]
-----------------------------------------------------------------------------------
*0 0C    0    1    1 -  1304  254   63  [                   63                20964762 ] Win95 FAT32
1 A5 1305    0    1 -  3263  254   63  [            20964825        31471335 ] FreeBSD
2 A6 3264    0    1 -  4862  254   63  [            52436160        25687935 ] OpenBSD
3 00    0    0    0 -     0    0    0  [                   0               0 ] unused

CODE:

16 partitions
#            size      offset       fstype       [fsize   bsize     cpg]
  a     21494576    52436160       4.2BSD         2048   16384      16   # /
  b      4209424    73930736         swap
  c     25688880    52436160       unused            0       0
  d     78140160           0       unused            0       0
  e     20964762          63        MSDOS  
  f     31471335    20964825      unknown

注意:e就是XP下的C盘,文件类型是MSDOS.

7.

CODE:

The next step *DESTROYS* all existing data on these partitions!
Are you really sure that you're ready to proceed? [no]        yes

System hostname? (short form, e.g. 'foo') # OpenBSD

Configure the network? [yes]        yes

DNS domain name? (e.g. 'bar.com') [my.domain] com

DNS nameserver? (IP address or 'none') [none] 202.96.128.68

Use the nameserver now? [yes]        回车

Edit hosts with ed? [no]        回车

Do you want to do any manual network configuration? [no] 回车

Password for root account? (will not echo)        # 输入密码,两次
Password for root account? (again)

8.当到选择安装介质时,选择'disk.'

CODE:

Sets can be located on a (m)ounted filesystem; a (c)drom, (d)isk or (t)ape device;
or a (f)tp, (n)fs or (h)ttp server.
Where are the install sets? (or 'done')         d

CODE:

Available disks are wd0.
Which one contains the install sets? (or 'done') [wd0]        回车

9.Partitions,选择'e'

CODE:

The following partitions have been found on wd0
  a     21494576    52436160       4.2BSD         2048   16384     328 #  (Cyl. 52020 - 73343*)
  b      4209424    73930736         swap                              #  (Cyl. 73343*- 77519)               
  c     25688880    52436160       unused            0       0         #  (Cyl. 52020 - 77504)
  d     78140160           0       unused            0       0         #  (Cyl.     0 - 77519)
  e     20964762          63        MSDOS                              #  (Cyl.     0*- 20798*)
  f     31471335    20964825      unknown                              #  (Cyl. 20798*- 52019)

Partition? [a]        e

10.文件系统:msdos

CODE:

The following filesystem types are supported
default          (deduced from the disklabel)
ffs
msdos
Which filesystem type? [default]  msdos

11.路径(请注意大小写)

CODE:

Pathname to the sets? (or 'done')  OpenBSD3.6/i386

12.选择包,全部

CODE:

The following sets are available. Enter a filename, 'all' to select
all the sets, or 'done'. You may de-select a set by prepending a '-'
to its name.

      [X] bsd
      [X] bsd.rd
      [X] bsd.mp
      [X] base36.tgz
      [X] etc36.tgz
      [X] misc36.tgz
      [X] comp36.tgz
      [X] man36.tgz
      [X] game36.tgz
      [X] xbase36.tgz
      [X] xetc36.tgz
      [X] xshare36.tgz
      [X] xfont36.tgz
      [X] xserv36.tgz

File name? (or 'done') [done]         回车
Ready to install sets? [yes]         回车
Where are the install sets? (or 'done') [done]         回车

13.包安装后设置

CODE:

Start sshd(8) by default? [yes]         回车
Do you expect to run the X Window System? [yes]  no
What timezone are you in? ('?' for list) [Canada/Mountain]  Asia/Shanghai