AlmaLinux 8.10 部署EDA环境（八）配置VNC

采用AlmaLinux 8.10罪小化安装！

1、关闭 selinux 和防火墙，并替换yum源
sed -i '/^SELINUX/s/enforcing/disabled/' /etc/selinux/config
systemctl disable firewalld
echo 192.168.1.111 nfs01 >> /etc/hosts
cp -rf /etc/yum.repos.d/ ./
rm -f /etc/yum.repos.d/*
curl -o /etc/yum.repos.d/almalinux8-iso.repo

2、配置主机名
echo "192.168.1.111    nfs01" >> /etc/hosts
echo "192.168.1.112    nis01" >> /etc/hosts
echo "192.168.1.113    lsf01" >> /etc/hosts
echo "192.168.1.114    node01" >> /etc/hosts
echo "192.168.1.115    node02" >> /etc/hosts

3、安装图形界面和vncserver
yum -y groupinstall "Server with GUI"
yum -y install tigervnc-server tigervnc-server-module

4、为每个配置用户界面
su - a000X
vncpasswd

echo "session=gnome" >> ~/.vnc/config
echo "geometry=1900x1000" >> ~/.vnc/config
echo "alwaysshared" >> ~/.vnc/config
exit

5、配置成为自动启动服务
echo ":1=a0001" >> /etc/tigervnc/vncserver.users
echo ":2=a0002" >> /etc/tigervnc/vncserver.users
echo ":3=a0003" >> /etc/tigervnc/vncserver.users
systemctl daemon-reload
systemctl restart dbus
systemctl start vncserver@:1.service
systemctl start vncserver@:2.service
systemctl start vncserver@:3.service