Chinaunix首页 | 论坛 | 博客
  • 博客访问: 15210593
  • 博文数量: 7460
  • 博客积分: 10434
  • 博客等级: 上将
  • 技术积分: 78178
  • 用 户 组: 普通用户
  • 注册时间: 2008-03-02 22:54
文章分类

全部博文(7460)

文章存档

2011年(1)

2009年(669)

2008年(6790)

分类: 系统运维

2008-05-20 10:37:34

对于Cisco的交换机和路由器来讲,虽然其不同型号的交换机的实现命令上有着很多的相似之处,但是,不同的交换机命令格式的差异却为网络设备的配置带来了一定的不便,因此,本人根据手头的交换机,进行一些基本操作的命令介绍,同时也有具体的配置实例。希望对网友的实际工作和学习有所帮助。同时也很希望有机会与各位网友一起交流探讨!

Catalyst 3524 switch IP 地址的配置
直接进入默认的VLAN 1中进行配置命令如下:
interface VLAN1
ip address 172.16.1.3 255.255.0.0
即可。

在Catalyst 中控制对Telnet的访问
bluestudy_a(config)#access-list 2 permit 172.16.0.0 0.0.255.255 (定义标准的访问列表)
bluestudy_a(config)#line vty 0 15(进入telnet端口,最多允许16个telnet的会话)
bluestudy_a(config-line)#access-class 2 in(应用上述定义的访问列表,即只有172.16.0.0/16的网段可以实现对交换机的telnet会话

设置交换机的enable 密码
bluestudy_a(config)#enable password bluestudy
bluestudy_a(config)#enable secret bluestudy
The enable secret you have chosen is the same as your enable password.
This is not recommended. Re-enter the enable secret.
注:对于如上的密码,secret的优先级更高,优先起作用。

设置console口密码
bluestudy_a(config)#line con 0
bluestudy_a(config-line)#password bluestudy
bluestudy_a(config-line)#

设置对telnet的密码:
bluestudy_a(config)#line vty 0 15
bluestudy_a(config-line)#login
bluestudy_a(config-line)#password bluestudy
bluestudy_a(config-line)#

设置登陆用户名和密码:

bluestudy_a(config)#username bluestudy password bluestudy
bluestudy_a(config)#


bluestudy_a#show running

Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname bluestudy_a
!
enable secret 5 $1$b1mb$p6XgV/PY9WqvJy9MrHZFG/
enable password bluestudy
!
username bluestudy password 0 bluestudy
!
ip subnet-zero
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/24
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface VLAN1
ip address 172.16.1.3 255.255.0.0
no ip directed-broadcast
no ip route-cache
!
access-list 2 permit 172.16.0.0 0.0.255.255
!
line con 0
password bluestudy
transport input none
stopbits 1
line vty 0 4
access-class 2 in
password bluestudy
login
line vty 5 15
access-class 2 in
password bluestudy
login
!
end
bluestudy_a#

阅读(514) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~