RIP and OSPF Redistribution

This case study addresses the issue of Configuring a RIP Network

Adding OSPF to the Center of a RIP Network

Adding OSPF Areas

Setting Up Mutual Redistribution

Figure 14-1 illustrates a RIP network. Three sites are connected with serial lines. The RIP network uses a Class B address and an 8-bit subnet mask. Each site has a contiguous set of network numbers.

Figure 14-1: A RIP network.

Table 14-1 lists the network address assignments for the RIP network, including the network number, subnet range, and subnet masks. All interfaces indicate network 130.10.0.0; however, the specific address includes the subnet and subnet mask. For example, serial interface 0 on Router C has an IP address of 130.10.63.3 with a subnet mask of 255.255.255.0.

Table 14-1: