分类： LINUX
2008-08-21 19:00:50
BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again BOOTP broadcast 1 Using egiga0 device TFTP from server 192.168.2.40; our IP address is 192.168.2.100 Filename 'uImage'. Load address: 0x400000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################### done Bytes transferred = 3118304 (2f94e0 hex) Marvell>> printenv baudrate=115200 loads_echo=0 cpuName=926 CASset=min MALLOC_len=4 ethprime=egiga0 bootargs_end=:::DB88FXX81:egiga0:none usb0Mode=host usb1Mode=host ethact=egiga0 ethaddr=00:10:75:FF:b7:69 autoboot=yes stdin=serial stdout=serial stderr=serial enaMonExt=no enaFlashBuf=yes enaCpuStream=no bootdelay=3 disaMvPnp=no overEthAddr=no image_name=uImage default_load_addr=0x200000 bootmode=normal bootargs=root=/dev/nfs rw nfsroot=192.168.2.40:/20g/etch/etch ip=dhcp console=ttyS0,115200 init=/sbin/init bootfile=uImage filesize=2f94e0 fileaddr=400000 gatewayip=192.168.2.40 netmask=255.255.255.0 rootpath=/20g/etch/etch ipaddr=192.168.2.100 serverip=192.168.2.40 Environment size: 654/4092 bytes Marvell>> bootm ## Booting image at 00400000 ... Image Name: Linux-2.6.26-rc9-Luelue-00107-gf Created: 2008-08-21 12:00:03 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3118240 Bytes = 3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux.................................................................................................................................................... Linux version 2.6.26-rc9-Luelue-00107-gfac7962-dirty (soltek@linux-qal3) (gcc version 4.2.3 (Sourcery G++ Lite 2008q1-126)) #7 PREEMPT Thu Aug 21 19:59:46 CST 2008 CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 Machine: Maxtor Shared Storage II Clearing invalid memory bank 0KB@0xffffffff Clearing invalid memory bank 0KB@0xffffffff Clearing invalid memory bank 0KB@0xffffffff Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x41000403 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: root=/dev/nfs rw nfsroot=192.168.2.40:/20g/etch/etch ip=dhcp console=ttyS0,115200 init=/sbin/init PID hash table entries: 512 (order: 9, 2048 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 123392KB available (5896K code, 439K data, 144K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 484 bytes NET: Registered protocol family 16 Orion ID: MV88F5182-A2. TCLK=166666667. Applying Orion-1/Orion-NAS PCIe config read transaction workaround PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (extended precision) VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/W]. JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. msgmni has been set to 241 async_tx: api initialized (async) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A console [ttyS0] enabled loop: module loaded Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.tx. MV-643xx 10/100/1000 Ethernet Driver net eth0: port 0 with MAC address 00:10:75:ff:b7:69 net eth0: scatter/gather enabled net eth0: tx checksum offload net eth0: napi enabled PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky HDLC support module revision 1.22 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. console [netcon0] enabled netconsole: network logging started Loading iSCSI transport class v2.0-869. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods SCSI Media Changer driver v0.25 Driver 'ch' needs updating - please use bus_type methods sata_mv sata_mv.0: version 1.24 sata_mv sata_mv.0: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 29 ata2: SATA max UDMA/133 irq 29 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $ NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected orion-ehci orion-ehci.1: Marvell Orion EHCI orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2 orion-ehci orion-ehci.1: irq 12, io mem 0xf10a0000 orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected 116x: driver isp116x-hcd, 03 Nov 2005 USB Universal Host Controller Interface driver v3.0 sl811: driver sl811-hcd, 19 May 2005 r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera usbcore: registered new interface driver usbserial usbserial: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core usbserial: USB Serial support registered for debug usbcore: registered new interface driver debug usbserial: USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver usbcore: registered new interface driver appledisplay usbcore: registered new interface driver cypress_cy7c63 usbcore: registered new interface driver cytherm cytherm: v1.0:Cypress USB Thermometer driver driver ftdi-elan built at 19:58:19 on Aug 21 2008 usbcore: registered new interface driver ftdi-elan idmouse: Siemens ID Mouse FingerTIP Sensor Driver 0.6 usbcore: registered new interface driver idmouse usbcore: registered new interface driver iowarrior usbcore: registered new interface driver isight_firmware usbcore: registered new interface driver ldusb usbcore: registered new interface driver usbled usbcore: registered new interface driver phidgetkit usbcore: registered new interface driver phidgetmotorcontrol usbcore: registered new interface driver phidgetservo usbcore: registered new interface driver usbtest usbcore: registered new interface driver trancevibrator trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver usbcore: registered new interface driver sisusb mice: PS/2 mouse device common for all mice i2c /dev entries driver rtc-m41t80 0-0068: chip found, driver version 0.05 rtc-m41t80 0-0068: rtc core: registered m41t81 as rtc0 SoftDog: cannot register miscdev on minor=130 (err=-16) pktgen v2.69: Packet Generator for packet performance testing. NET: Registered protocol family 26 GACT probability on Mirror/redirect action on u32 classifier Performance counters on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (2048 buckets, 8192 max) ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP bic registered TCP cubic registered TCP westwood registered TCP htcp registered Initializing XFRM netlink socket NET: Registered protocol family 17 Bridge firewalling registered Ebtables v2.0 registered NET: Registered protocol family 4 RPC: Registered udp transport module. RPC: Registered tcp transport module. NET: Registered protocol family 33 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller SCTP: Hash tables configured (established 4096 bind 8192) VFP support v0.3: not present kAFS: Red Hat AFS client v0.1 registering. rtc-m41t80 0-0068: setting system clock to 2008-08-21 23:13:55 UTC (1219360435) Sending DHCP requests .., OK IP-Config: Got DHCP answer from 192.168.2.1, my address is 192.168.2.47 IP-Config: Complete: device=eth0, addr=192.168.2.47, mask=255.255.255.0, gw=192.168.2.1, host=192.168.2.47, domain=, nis-domain=(none), bootserver=192.168.2.1, rootserver=192.168.2.40, rootpath= Looking up port of RPC 100003/2 on 192.168.2.40 Looking up port of RPC 100005/1 on 192.168.2.40 VFS: Mounted root (nfs filesystem). Freeing init memory: 144K INIT: version 2.86 booting mknod: `/dev/ptmx': Read-only file system * Failed making node /dev/ptmx with error code 1. Activating swap...done. Setting the system clock again.. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. /etc/rcS.d/S12mtab.sh: line 100: /etc/mtab: Read-only file system Cleaning up ifupdown.... Loading kernel modules...done. Loading device-mapper support. Checking file systems...fsck 1.40-WIP (14-Nov-2006) WARNING: Your /etc/fstab does not contain the fsck passno field. I will kludge around things for you, but you should fix your /etc/fstab file as soon as you can. done. Setting kernel variables...done. Mounting local filesystems...can't create lock file /etc/mtab~180: Read-only file system (use -n flag to override) failed. Activating swapfile swap...done. /etc/init.d/bootclean: line 24: /tmp/.clean: Read-only file system * bootclean: Failure creating '/tmp/.clean'. rm: cannot remove `./crond.pid': Read-only file system rm: cannot remove `./motd': Read-only file system rm: cannot remove `./crond.reboot': Read-only file system * bootclean: Failure cleaning /var/run. /etc/init.d/bootclean: line 24: /var/lock/.clean: Read-only file system * bootclean: Failure creating '/var/lock/.clean'. Setting up networking.../etc/rcS.d/S39ifupdown: line 85: /etc/network/run/ifstate: Read-only file system * Failure initializing /etc/network/run/ifstate failed! Configuring network interfaces...done. /etc/init.d/bootclean: line 24: /tmp/.clean: Read-only file system * bootclean: Failure creating '/tmp/.clean'. rm: cannot remove `./crond.pid': Read-only file system rm: cannot remove `./motd': Read-only file system rm: cannot remove `./crond.reboot': Read-only file system * bootclean: Failure cleaning /var/run. /etc/init.d/bootclean: line 24: /var/lock/.clean: Read-only file system * bootclean: Failure creating '/var/lock/.clean'. /etc/rcS.d/S55bootmisc.sh: line 28: /var/run/utmp: Read-only file system INIT: Entering runlevel: 2 Starting system log daemon: syslogdchmod: changing permissions of `/dev/xconsole': Read-only file system chown: changing ownership of `/dev/xconsole': Read-only file system |
chinaunix网友2008-09-24 19:26:32
Marvell>> setenv bootargs root=/dev/nfs rw nfsroot=192.168.2.40:/20g/etch/etch ip=dhcp console=ttyS0,115200 init=/sbin/init 然后bootp，就不停的BOOTP broadcast ... 本机nfs正常，网络正常，奇了怪了。。
