安装linux后的内核调优

安装linux后的内核调优

kernel.shmall = 268435456
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 1200
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.tcp_max_tw_buckets = 5000
net.ipv4.tcp_max_tw_buckets = 5000
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000 65000
net.ipv4.tcp_mem = 786432 1048576 1572864
net.core.wmem_max = 873200
net.core.rmem_max = 873200
net.ipv4.tcp_wmem = 8192 436600 873200
net.ipv4.tcp_rmem = 32768 436600 873200
net.core.somaxconn = 256
net.core.netdev_max_backlog = 1000
net.ipv4.tcp_max_syn_backlog = 2048
net.ipv4.tcp_retries2 = 5
net.ipv4.tcp_keepalive_time = 500
net.ipv4.tcp_keepalive_intvl = 30
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.conf.lo.arp_ignore = 0
net.ipv4.conf.lo.arp_announce = 0
net.ipv4.conf.all.arp_ignore = 0
net.ipv4.conf.all.arp_announce = 0

几个解释：
net.ipv4.tcp_syncookies = 1
#表示开启SYN Cookies。当出现SYN等待队列溢出时，启用cookies来处理，可防范少量SYN攻击，默认为0，表示关闭；
net.ipv4.tcp_tw_reuse = 1
#表示开启重用。允许将TIME-WAIT sockets重新用于新的TCP连接，默认为0，表示关闭；
net.ipv4.tcp_tw_recycle = 1
#表示开启TCP连接中TIME-WAIT sockets的快速回收，默认为0，表示关闭。
net.ipv4.tcp_fin_timeout = 30
#表示如果套接字由本端要求关闭，这个参数决定了它保持在FIN-WAIT-2状态的时间。
net.ipv4.tcp_keepalive_time = 1200
#表示当keepalive起用的时候，TCP发送keepalive消息的频度。缺省是2小时，改为20分钟。
net.ipv4.ip_local_port_range = 1024    65000
#表示用于向外连接的端口范围。缺省情况下很小：32768到61000，改为1024到65000。
net.ipv4.tcp_max_tw_buckets = 5000
#表示系统同时保持TIME_WAIT套接字的最大数量，如果超过这个数字，
#TIME_WAIT套接字将立刻被清除并打印警告信息。默认为180000，改为5000。
#对于Apache、Nginx等服务器，上几行的参数可以很好地减少TIME_WAIT套接字数量，
#但是对于Squid，效果却不大。此项参数可以控制TIME_WAIT套接字的最大数量，避免Squid服务器被大量的TIME_WAIT套接字拖死。

http://hi.baidu.com/farmerluo/blog/item/fc56b745c7cdef2fcefca364.html