NETAPP 模拟器

 

目前线上环境做了NetApp的在线扩容，为了方便学习，弄了个模拟器搭建测试环境。用的是Linux下运行的7.35版本，官方目前提供最新的是8.1的VMware版本。由于没NetApp Now帐户，在网上down的一个7.35。需要的同学可访问如下链接：

本文实验环境：
CentOS 5.8 Base

[root@localhost ~]# cd /mnt/ [root@localhost mnt]# ls disks2.tgz license.htm setup.sh disks.tgz readme.htm sim.tgz doc runsim.sh Vmware, Linux and Simulator installation.doc [root@localhost mnt]# cp -r /mnt/* /tmp [root@localhost mnt]# cd /tmp/ [root@localhost tmp]# ls disks2.tgz license.htm setup.sh disks.tgz readme.htm sim.tgz doc runsim.sh Vmware, Linux and Simulator installation.doc [root@localhost tmp]# ./setup.sh Script version 22 (18/Sep/2007) Where to install to? [/sim]: Would you like to install as a cluster? [no]: Would you like full HTML/PDF FilerView documentation to be installed [yes]: Continue with installation? [no]: y Creating /sim Unpacking sim.tgz to /sim Configured the simulators mac address to be [00:50:56:15:49:80] Please ensure the simulator is not running. Your simulator has 3 disk(s). How many more would you like to add? [0]: 25(硬盘范围为0-25块) The following disk types are available in MB: Real (Usable) a - 43 ( 14) b - 62 ( 30) c - 78 ( 45) d - 129 ( 90) e - 535 (450) f - 1024 (900) If you are unsure choose the default option a What disk size would you like to use? [a]: f（每块硬盘的大小为1024MB） Disk adapter to put disks on? [0]: Use DHCP on first boot? [yes]: n Ask for floppy boot? [no]: Checking the default route... You have a single network interface called eth0 (default route) . You will not be able to access the simulator from this Linux host. If this interface is marked DOWN in ifconfig then your simulator will crash. Which network interface should the simulator use? [default]: Another simulator is running. Cannot give good advise about memory. How much memory would you like the simulator to use? [512]: Create a new log for each session? [no]: Overwrite the single log each time? [yes]: Adding 25 additional disk(s). Complete. Run /sim/runsim.sh to start the simulator. [root@localhost tmp]# cd /sim/ [root@localhost sim]# ./runsim.sh runsim.sh script version Script version 22 (18/Sep/2007) This session is logged in /sim/sessionlogs/log NetApp Release 7.3.5: Mon Nov 22 20:37:51 PST 2010Copyright (c) 1992-2010 NetApp.Starting boot on Sun Apr 15 08:09:27 GMT 2012 Sun Apr 15 08:09:27 GMT [iomem.init.fail:CRITICAL]: Failed to initialize caching module (model name , serial number , part number ) in slot 1. Sun Apr 15 08:09:37 GMT [fmmb.current.lock.disk:info]: Disk v4.16 is a local HA mailbox disk. Sun Apr 15 08:09:37 GMT [fmmb.current.lock.disk:info]: Disk v4.17 is a local HA mailbox disk. Sun Apr 15 08:09:37 GMT [fmmb.instStat.change:info]: normal mailbox instance on local side. Sun Apr 15 08:09:41 GMT [raid.cksum.replay.summary:info]: Replayed 0 checksum blocks. Sun Apr 15 08:09:41 GMT [raid.stripe.replay.summary:info]: Replayed 0 stripes.sparse volume upgrade done. num vol 0.Vdisk Snap Table for host:0 is initialized Sun Apr 15 08:09:45 GMT [vol.language.unspecified:info]: Language not set on volume vol0. Using language config "C". Use vol lang to set language. Sun Apr 15 08:09:45 GMT [rc:notice]: The system was down for 41954240 secondsSun Apr 15 08:09:46 GMT [useradmin.added.deleted:info]: The role 'compliance' has been added. Sun Apr 15 08:09:46 GMT [useradmin.added.deleted:info]: The group 'Backup Operators' has been modified. /etc/rc is missing. Running configuration dialog. NetApp Release 7.3.5: Mon Nov 22 20:37:51 PST 2010 System ID: 0099927627 () System Serial Number: 987654-32-0 () System Storage Configuration: Multi-Path System ACP Connectivity: Model Name: Simulator Processors: 1 slot 0: NetApp Virtual SCSI Host Adapter v0 28 Disks: 25.8GB 3 shelves with LRC slot 1: NetApp Virtual SCSI Host Adapter v1 slot 2: NetApp Virtual SCSI Host Adapter v2 slot 3: NetApp Virtual SCSI Host Adapter v3 slot 4: NetApp Virtual SCSI Host Adapter v4 28 Disks: 25.8GB 3 shelves with LRC slot 5: NetApp Virtual SCSI Host Adapter v5 slot 6: NetApp Virtual SCSI Host Adapter v6 slot 7: NetApp Virtual SCSI Host Adapter v7 slot 8: NetApp Virtual SCSI Host Adapter v8 4 Tapes: VT-100MB VT-100MB VT-100MB VT-100MB Please enter the new hostname []: netapp Do you want to enable IPv6? [n]: Do you want to configure virtual network interfaces? [n]: Please enter the IP address for Network Interface ns0 []: 10.10.127.40 Please enter the netmask for Network Interface ns0 [255.0.0.0]: 255.255.255.0 Please enter media type for ns0 {100tx-fd, auto} [auto]: Please enter the IP address for Network Interface ns1 []: Would you like to continue setup through the web interface? [n]: y executing: ifconfig ns0 10.10.127.40 mediatype auto netmask 255.255.255.0 Sun Apr 15 08:11:03 GMT [netif.linkUp:info]: Ethernet ns0: Link up. Point a web browser to or (web初始化访问地址) to complete setup. At any time, you can continue with the console setup. Please enter the name or IP address of the IPv4 default gateway: 10.10.127.254 The administration host is given root access to the filer's /etc files for system administration. To allow /etc root access to all NFS clients enter RETURN below. Please enter the name or IP address of the administration host: Please enter timezone [GMT]: Where is the filer located? []: What language will be used for multi-protocol files (Type ? for list)?: language not set Do you want to run DNS resolver? [n]: Do you want to run NIS client? [n]: The Shelf Alternate Control Path Management process provides the ability to recover from certain SAS shelf module failures and provides a level of availability that is higher than systems not using the Alternate Control Path Management process. Do you want to configure the Shelf Alternate Control Path Management interface for SAS shelves [n]: Setting the administrative (root) password for netapp ... New password:______ Retype new password:______ Sun Apr 15 08:12:23 GMT [passwd.changed:info]: passwd for user 'root' changed. Sun Apr 15 08:12:24 GMT [tapemc.alias.addOK:info]: Alias st0 automatically added for tape device WWN[0:042:424200:000000].Sun Apr 15 08:12:24 GMT [dfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk drives Sun Apr 15 08:12:24 GMT [sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.Sun Apr 15 08:12:24 GMT [tapemc.alias.addOK:info]: Alias st1 automatically added for tape device WWN[0:142:424200:000000]. Sun Apr 15 08:12:24 GMT [tapemc.alias.addOK:info]: Alias st2 automatically added for tape device WWN[0:242:424200:000000]. Sun Apr 15 08:12:24 GMT [tapemc.alias.addOK:info]: Alias st3 automatically added for tape device WWN[0:342:424200:000000]. add net default: gateway 10.10.127.254 There are 25 spare disks; you may want to use the vol or aggr command to create new volumes or aggregates or add disks to the existing aggregate. Sun Apr 15 08:12:25 GMT [snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests from root. Reason: Password is too short (SNMPv3 requires at least 8 characters). Sun Apr 15 08:12:25 GMT [rc:info]: Registry is being upgraded to improve storing of local changes. Sun Apr 15 08:12:26 GMT [rc:info]: Registry upgrade successful. Sun Apr 15 08:12:26 GMT [perf.archive.start:info]: Performance archiver started. Sampling 22 objects and 195 counters. Sun Apr 15 08:12:27 GMT [mgr.boot.disk_done:info]: NetApp Release 7.3.5 boot complete. Last disk update written at Thu Dec 16 18:12:22 GMT 2010 Sun Apr 15 08:12:27 GMT [mgr.boot.reason_ok:notice]: System rebooted after a halt command. This process will enable CIFS access to the filer from a Windows(R) system. Use "?" for help at any prompt and Ctrl-C to exit without committing changes. Your filer does not have WINS configured and is visible only to clients on the same subnet. Do you want to make the system visible via WINS? [n]: A filer can be configured for multiprotocol access, or as an NTFS-only filer. Since multiple protocols are currently licensed on this filer, we recommend that you configure this filer as a multiprotocol filer (1) Multiprotocol filer (2) NTFS-only filer Selection (1-2)? [1]: 1 CIFS requires local /etc/passwd and /etc/group files and default files will be created. The default passwd file contains entries for 'root', 'pcuser', and 'nobody'. Enter the password for the root user []: ______ Retype the password:______ The default name for this CIFS server is 'NETAPP'. Would you like to change this name? [n]: Data ONTAP CIFS services support four styles of user authentication. Choose the one from the list below that best suits your situation. (1) Active Directory domain authentication (Active Directory domains only) (2) Windows NT 4 domain authentication (Windows NT or Active Directory domains) (3) Windows Workgroup authentication using the filer's local user accounts (4) /etc/passwd and/or NIS/LDAP authentication Selection (1-4)? [1]: 4 What is the name of the Workgroup? [WORKGROUP]: CIFS - Starting SMB protocol... Welcome to the WORKGROUP Windows(R) workgroup CIFS local server is running. Password:______ netapp> Sun Apr 15 08:13:00 GMT [console_login_mgr:info]: root logged in from console

下面是图形化初始界面

1