Stop-A on Serial Console?

使用Sun的机器,由于没有显卡,只能使用串口了

由于找不到Stop键,没有办法使用Stop-A的操作

如下是精华,呵呵:

See if the online docs reference a "BREAK" signal.

正解

Subject: Stop-A on Console?

Original Message

Name: (by inittab)
Date: July 29, 2004 at 12:18:19 Pacific
Subject: Stop-A on Serial Console?
OS: N/A
CPU/Ram: 300MHz, 256mb

Comment:

Is it possible to send Stop-A to a Ultra 30 over a serial console? Unfortunately, the system that I'm connecting from runs and therefor does not support `tip`. Hence, I am using Columbia's Kermit (`kermit`) to establish the connection. Everything works as expected from the boot banner to the console login, but I would like to be able to halt the system without booting the first, so I need to figure out how to send such a command (Stop/L1-A). Thank you.

Response Number 1

Name:
Date: August 02, 2004 at 09:23:48 Pacific
Subject: Stop-A on Serial Console?

Reply:

It depends a lot on your terminal package. Some key sequences to try

CONTROL-]

CONTROL-L

See if the online docs reference a "BREAK" signal.

Response Number 2

Name: nrc
Date: August 04, 2004 at 18:59:57 Pacific
Subject: Stop-A on Serial Console?

Reply:

could also use alt-b, if using teraterm